Error message "multiple objects found"

Hi,
I run into a new issue and durig role creation of design-time-roles. I get since a few days the message
"test:testrole.hdbrole": multiple objects found
my simplified role: (worked out before hundred times)
test::test
extends role test::testrole
The role exists as design-time-object (one entry in "_SYS_REPO"."ACTIVE_OBJECT" and also only one entry in "SYS"."ROLES")
Other roles can be granted as as usual - just a bunch of them make trouble.
I dropped the roles (afterwards 0 entries in the mentioned tables) ... when activating testrole.hdbrole it says no object found - as expected. created the role again and the message appears again. Pretty weird.
Did one of you had the same issue and solved it?
Thanks for your answers in advance!
Regards,
Marcus
P.S: Running HANA SP7 Rev 72 (DB+Studio+Client)

Hi Mika
Can you check your : HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path
For each key under HKLM\SOFTWARE\Microsoft\Office, apparently HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path has a "Outlook.exe" file at the location.
If more than 1 file paths are found, then it appears that multiple versions of the outlook are installed.
You might want to re install office if more thaqn one appears

Similar Messages

Trex error: No embedded object found in document (Errorcode 14037)

Hi,
we have following problem with our crawler:
in the crawler 50 % of documents are returning the error "No embedded object found in document (Errorcode 14037)" and are not displayed in the trex monitor. All other documents are indexed correctly an are in the trex monitor in "OK".
We are on Stack 14 Patch 4.
Regards,
Gerhard

Hi Gerhard,
Typically, errors codes 14XXX are related to filter problems during the preprocessing of documents. Details about TREX error codes are explained in the help portal and in the note 898404.
Unfortunatelly, filter problems could not be easily fixed. However, a good starting point would be to use a newer TREX release. If this doesnt help please open a Customer Message and attach documents, which causes the mentioned error. Please attach only not sensible documents!
Kind regards,
Roland

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
The error message that pops up is:
Process:         Safari [1279]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ???
Build Info:      WebBrowser-7537085010017001~4
Code Type:       X86-64 (Native)
Parent Process: launchd [194]
Responsible:     Safari [1279]
User ID:         505
Date/Time:       2014-09-26 08:16:17.066 +1000
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 84ADDFB5-CAD4-0759-3667-8E0B47E8E995
Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
Dyld Error Message:
Symbol not found: __ZN3JSC10JSDataView6s_infoE
Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
(insert a 'shed load' of other lines of log data which you probably don't need, right?)

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

T-code CO01 to create Production order:error message "No routing found"?

I use t-code CO01 to create Production order.At the first screen I select material 72 and plant HJW1 .At the Header creen,I input the data in the General tab and press return but the sap show the error message "No routing found".But I have create the routing for the material 72 and plant HJW1.I don't know why the sap found no routing.So my question was how to found the reason about why the sap can not found the routing and how to resolve this problem.Thank you.

Hi,
Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
Regards,
Prasobh

When I try to update LR I get an error message Application not found

When I try to update LR I get an error message "Application not found".
When I try Help in LR it can't be found.
What is wrong?

Talked with Adobe support. Told me to go to Cloud app and log out, then log
in again and then update. Worked fine for me. Hope this helps!
Best regards,
Fredrik Moell
Tomatis New Zealand
www.tomatis.co.nz
A division of Your Amazing Health Ltd
54 Fancourt Street, Meadowbank, Auckland 1072
0800-TOMATIS (866 2847)
Personal 021-1721 930

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

I try to boot the old T2150CDT - error message "sector not found reading drive C"

Hi,
I came by one of these and am trying to fire it up, but I keep getting the message, "sector not found reading drive C". I get this message right after the windows 98 logo appears.
Problem is that I'm limited in what I can do, because I have no floppy drive and dos doesn't recognize the CD Rom drive (drivers missing); although I can hear it during boot up.
So I took the HDD out and pasted the windows 98 installation files into it; then tried to reinstall, but I again get the "sector not found reading drive C" message. Is the drive too large, (It's about 2.1 gigs.)
Would installing the correct drivers for the CD Rom allow me to install from a CD?
this usually works
Thanks,
john

As far as I know the error message; sector not found reading drive C" appears because of these three different reasons:
- physical HDD fault
- corrupted HDD file system
- bad RAM
In first case you should try to format the whole HDD and should try to install the new OS.
If it will not help, the chances are that the HDD malfunctions and must be replaced.

Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll

I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll. This is preventing me from transferring my information from my old phone to my new iPhone 5c. Can anyone help me??? A simple restart of the computer did not solve the problem.
Thanks :-)

I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!

Error Message - No Disk Found

I plugged in my ipod (60gig) and I got the message that no disk found. I installed the lastest ipod software, still same prob. I then reset the ipod and same problem I uninstalled itunes and reinstalled it and it worked for a couple of hours and then I got the same message. In the mean time it freezes up the itunes application and when I try closing it I get the message that itunes is not responding. I have to do a hard shut down and restart my pc. It works fine with just itunes, but as soon as I plug the ipod in it freezes then giving me the no disk found error message. Anyone know why this would happen? I have had it just over a month and this is the first time this has been happening.

Does the problem link download a file? Firefox remembers the last download location on a site-by-site basis, and it's possible that location existed temporarily but no longer exists.
If it's not a download, if you hover your mouse over the link, does Firefox show that as part of the URL (down toward the bottom of the browser)?

Error message "multiple objects found"

Similar Messages

Maybe you are looking for