Error Message Nbr CU400 - Internal error: find_charid_for_atinn using CU35
Why would CU35 throw internal error: find_charid_for_atinn? This is occurring in multiple KMAT models that use one common characteristic. One model is new the other models are existing.
Your help and insite is appreciated
Edited by: Julie Schmitt on Aug 27, 2010 5:07 PM
The Configuration Modelers determined the problem causing this error was due to the value "1" missing from the Org on the characteristic in the class of the model. When this was added, the KMAT models runtime could be updated with tcode CU35.
Solution was to go into tcode CL02 and add the value "1" to the org area for the characteristic.
Similar Messages
-
Please help! Error messages -3, -1603, Internal error 2318 during download
Hello! I have been having trouble with itunes for quite some time now. When I download the itunes/QT package, the download stops near the end and gives me the 'Error Code: -3 QuickTime failed to install' message. I have uninstalled an reinstalled countless times and I'm going crazy! I have already tried:
- downloading the standalone Quicktime
- Disabling my security/firewall/virus protection
- Deleting Windows Update KB908531
- Using the windows install cleanup
- Clearing my Temp files
I have looked through the forum and I have not seen any threads by someone with the same problem. I'm NOT getting error 1402. Any suggestions??
Thank you in advance for your help.
Dell Dimension 4700 Windows XPThis error message shouldn't appear while downloading iTunes/QT. Have you chosen to directly execute the downloaded file?
I don't know if it might help, but you could try to first save the package to disk and then running the installer, i.e. after the download has completed.
Are you using a 32bit or a 64bit version of Win XP? The issue often discussed here (the conflict with the Windows Security Update you removed) only occured with 64Bit windows, afaik.
I'm afraid I don't remember the errorcode I used to get when the QT installation failed. -
Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE
http://support.apple.com/kb/TS3281
-
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas -
HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
Please let me know how to fix this issueupdate...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated. -
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
I get the error message "The media can’t be used because you don’t have access privileges, or because it has no content or is corrupt." when I drag photos (or copy and paste photos) from iPhoto to Pages/Word.
It never used to do this and is really quite annoying, as I now have to find the file through finder to drag from there.
I had to rebuild the iPhoto library a few days ago, is it something to do with this?
Thanks in advance.Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
i used another USB cable and then also its showing error message as[ An unknown error occurred (0xE8000022)]
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.
The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes. -
I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20: <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21: </httpHandlers>
Line 22: <authentication mode="Forms">
Line 23: <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24: </authentication>Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen -
When I am trying to sync my ipod touch, it gives me the message that an internal error is keeping it from happening. Can anyone help?
What is the exact wording of the error message? If an error number or additional information is not in the message
try restoring the iPod via iTunes -
'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1
Is your AirPort Express an older 802.11g model? If so, you will need to install v5.6 if you are running OS X Lion or 5.6.1 if running OS X Leopard or Snow Leopard. Unfortunately, the iOS version of the AirPort Utility cannot administer these older base stations.
-
Error message "Pro.sparsebundle" is already in use when trying to back up computer
My computer will not back up to Time Capsule and gives me the Error Message pro.sparsebundle is already in use - how do I reset so I can back up
Reboot the TC.
Since there is no on/off button.. power off the TC at the wall or remove the power cable.. count to 10 slowly.. plug the power back in again.. voila. reset. -
I've done all of the above suggested sign in methods, and yet ibooks gives me the following error message "This Apple ID cannot be used for the iTunes Store."
Found this in the forums here, it works.
"OK...I think I have found a solution. In settings, select tunes & app store. click on Apple ID> View Apple ID>Payment Information. It appears it is not saving or requiring payment information to be updated. This worked for me."
Thanks -
I keep getting an error message saying "This iPod cannot be used because Apple Mobile Device service is not started" and i have no idea what that means so any help will be much appreciated, i just want to add more of my music on it
I got that message yesterday. I'm new at this so don't know if this is the correct solution but it worked for me. I reset my iPod by holding the 2 buttons down until the apple appears AND I restarted my computer. After that everything worked.
Maybe you are looking for
-
I have a TagLib which is working perfectly with JSPs,The Tag is <c:chart id="chart1" datasource="#{name.Graph}" type="xyline" is3d="false" background="green" height="50" width="150" legend="false" border="true"> </c:chart>. What i am trying to do is
-
Showing as unavailable in iCal
We have recently migrated to Exchange 2010 and are testing out the integration with it and iCal. We have run across a problem whenever we add any invitees to a meeting it shows them as unavailable. Also for some reason our default work hours are set
-
URGENT: Incomplete classpath settings
hi all, When we create the project for the development component in NWDS 2004. The Development component is having lot of errors. There is no default jarfiles available for the project in java build path --> libraries. When we add the jar ifle
-
Different colors in Photoshop and Lightroom
A fresh install of LR and PS CS2. I display an image in Lightroom (no adjustments at all) and open it in Photoshop (edit in ps CS2-->edit original). When I skip between LR and PS, I see different colors. The photos displayed in LR seem to be a little
-
Installing web service handler
is there a way of programmatically deploying a handler onto a web service operation? i looked at jax-rpc HandlerRegistry but when i set a handler chain, it did not do anything. is this aupposed to set the handler chain on the server so all future cal