Error Message: Need to purge Cache in Adobe Bridge CC (on PC)
I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.
Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.
Similar Messages
-
Error message when installing, modifying or repairing Adobe Reader
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: <Keyname>. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value <Valuename> to key <Keyname>.
Verify that you have sufficient access to that key or contact you support personnel.
Please see: Error message when installing, modifying or repairing Adobe ReaderThank You phoney01.. this did indeed work perfectly for me as well!
-
Error message needs to be generated in case of change in released PO.
Hi all,
please help me how to solve this issue
<b>issue1:</b>
Error message needs to be generated in case of change in released PO.
1) change in incoterms,
2) payment terms,
3) quantity
4) rate.
The system should allow for change on the higher side.Hi ,
I think you point no 3 & 4 can be solved using option available in release startegy and for point 1 & 2 u have to try with some user_exits. I think so , others can comment on this .
Thanks
Dipak -
new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(
So where is LR trying to copy the files? Check your destination in the Import panel at the right.
-
How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)
How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat -
Error message: there is a problem with adobe acrobat reader. if it is running please exit and try a
error message: there is a problem with adobe acrobat reader. if it is running please exit and try again (0:104) How can I fix this?
Hi Claudio, Thanks for your assistance. I'm still confused. When I click on this site it tells me: To view this FTP site in Windows Explorer, CLICK PAGE, and then click Open FTP Site in Windows Explorer. I do not see "Page" on this list. There is a "pace"... though.
-
A get an internal error message when i try to install adobe reader
I get an internal error message when I try to install Adobe reader. I also get error message 1606 could not access net location %APPDATA%\. How can I fix this?
See this article http://support.microsoft.com/kb/886549/ regarding the corrupted %APPDATA% environment variable.
If you require further help, please specify your Windows version. -
I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?
TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.
-
Error message 1310 when trying to download adobe reader
Error message 1310 when trying to download adobe Reader?
This article is not for Reader, but its tips may be useful: http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file .html
-
HT5655 Error message received when attempting to download Adobe Flash for Mac version 10.8.5. HELP!
Error message received when attemping to download Adobe Flash on MacBook Air using either Safari or Firefox.
Are you downloading directly from the Abobe site? Non-Adobe hosting sites may have corrupted or contaminated versions.
http://get.adobe.com/flashplayer/?promoid=KEWEI -
Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?
Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne
-
I have Acrobat 10 (10.1.9) that came in the Creative Suite CS5. I have received numerous messages about failed updates so finally did what was recommended by Adobe and uninstalled the program. Now I can't re-install it. These are the error messages I get. Help!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failedI did it through CS, I think. I used the installation disk and selected Acrobat. It loads and then gives me all kinds of error messages and then uninstalls itself.
-
Outlook causing 'connection was reset' error message, need my email, help!
I have looked through so many troubleshooting questions that are similar but nothing is helping.
So far;
Turned it off and on again.
Deleted cookies, searched for corrupted files left behind but found nothing.
Cleared the cache.
Checked the anti virus software (bitdefender)
Uninstalled Flash player.
Disabled add ons.
Threatened to hit it.
All my other webpages work.
Cant make it work in IE either.What is the web page / site address you are having problems with?
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
https://support.mozilla.org/en-US/kb/connection-untrusted-error-message
'''This Connection is Untrusted''' is sometimes caused because the
computer system clock is wrong. Check the time / date / time zone settings. -
Loss of photos due to error message - need to recover
After downloading some photos on holiday and refining them in iphoto, I received an error message saying it was shutting down. On restarting I noticed a number of events empty based on work I had just completed within them. As I am travelling have had no chance to back up. Any advice on how I can recover the photos. See some software out there but surely this is not needed. Any help will be appreciated
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Crash report:
bp-74bcae4f-7091-4121-a809-5d0a12140616 is the crash report.
I have a Toshiba.
When I open my email (gmail, school email) and try to attach a file, firefox immediately crashes and gives me two error messages. first one is a WerFault, i think. I don't know if that's relevant.
Apart from these crashes in Firefox, I am also having the same problem when trying to view or open a pdf in adobe reader, or even open adobe reader itself. It won't try to open, I just receive the error messages. I've uninstalled and reinstalled it two times now. I did this thing suggested online where you go into the control panel and look at all your plugins. Then, "repair" adobe reader - pretty sure it's just a button that says repair. that didn't do anything, of course I also could have done something wrong.
I realize this could be a problem unrelated to Firefox, but I'm doing what I can before I take my laptop in.
Please save me.Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-(
Maybe you are looking for
-
Hello everyone, I have to bind our application from ActiveDirectory to eDirectory. Is there a simple way to determine if the currently logged in user is a member of a group? In ActiveDirectory this is really simple but in eDirectory (using the LDAP C
-
I am a teacher, and I have lots of uses for labels of different sizes in my class. I would like to be able to create labels where I can write different things on each one, rather than have the labels come from a database (like my address book). I kne
-
Issues with uploaded files and timestamps
Hi All, I am building an app that will have 2 csv's uploaded daily, and compare results. The problem I have is that I can't seem to get the data into tables using the timestamp datatype. I fixed this by making the columns varchar2 rather than timesta
-
Viewing a disk image created in iDVD6
After succesfully creating and burning a DVD project, and confirming it works on my TV/DVD player, I decided to make a disk image of the file for convenience of easily burning more copies later. The iDVD6 help page says "you can play it on your compu
-
Got some broken DC's even the import is successful. where to check the log of broken Dc's