Error message: network copying over 31 characters not allowed, no ownership

I have a MacBook Pro and a Mac Mini on a wired home network. The mini has an outboard USB drive mounted.
I backup the MacBook Pro to that drive. I did this by turning Appleshare on on the Mini, and turning on personal file sharing. I then connect to it from the MacBook Pro by going to the Network prefs pane.
I use Silverkeeper to backup. Until yesterday all of this worked fine. Yesterday I removed the outboard drive from the Mini and added two other USB drives. Both were new, and I formatted both as Mac OS extended (Journaled).
Now, when I try to run Silverkeeper to backup to either of those new drives, I receive a message telling me that copying to the drive ("a Server (AppleShare) volume") may lose some functionality:
- files over 2GB are not supported
- Ownerships & Permissions not supported
- Names over 31 chars not supported
Hunh?
I don't understand why this just started happening, but it looks like an OS issue. Anyone?

Hmmm, with those limits, it seems that it thinks it's an HFS volume instead of HFS+, or HFS+ formatted under Mac OS 9/Mac OS 8 that only supports file sizes of up to 2 GB in size.
And Anthony has some good advice/comments on the connection method, seems HFS+ via NFS has some of those limits.
I use FW drives on most of my Networks, but some USB, and NDAS drives, and use Tri-Backup, never see this probem...
http://www.tri-edre.com/english/index.html
30 day free trial. Can't say enough good about Tri-Backup.

Similar Messages

Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
-Jay-
Post relates to: Treo Pro T850 (Sprint)
This question was solved.
View Solution.

audiojay11 wrote:
P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
Try adding it to the server name, e.g.: smtp.provider.com:587

Bdoc error : Message no. COM_PRODUCT701 Language ( is not allowed

Hi Guys,
I am in the process of downloading the material master from r/3 to CRM 7.0. I have been getting this bdoc error "Bdoc error : Message no. COM_PRODUCT701 Language ( is not allowed ".
Anybody can help me in fixing this issue? Really appreciate that.
Regards,

I havent received solution on this but i need to post a new thread & since i have 10 open theards, system is not allowing me to post the same.

I am trying to edit my website using the copy and paste function and am getting an error message that says my browser will not allow this function.. what do I do? thanks!

I am trying to do a simple copy and paste function while editing my website and I am getting an error message that says that my browser will not allow this function.. how can I override this?
thanks
Doug Snyder

You need to set Copy'n'Paste security policies for that domain in Firefox.
AllowClipboard Helper will help you do that. <br />
https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/

I am trying to ask a question about iPhones, but it will not let me post - I get a message similar to this - you are not allowed to change the content. Any help on this matter?

I am trying to ask the following question: Just updated my iPhone5 to V 7.1.2 and can no longer print to my MFC 7860W from this phone. I researched this issue on this forum and found answers from last October/November..... Wary of downloading anything that was posted that long ago. Wondering if there is anyway around this issue, with more recent information? I was able to use this printer in the past by using Brother's iPrint App.
Thanks!!
But when I hit post, I get an error message at the top - "you are not allowed to change this content" Can anyone help me?

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

HT1923 I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

3G. I keep getting an error message "Network not available".

3G. I keep getting an error message "Network not available". This is after turning data roaming ON, and even after turning phone off then back on, and having a 3G signal. Help!

I did ask my carrier - twice. I also went into the Apple Store (45 miiles away), who checked it and assured me no hardware issues.
I went back to the phone carrier - for the 3rd time. The assistant rolled her eyes and said this happens all the time. She changed the cellular data network settings on my phone from ideate to mobile. Problem solved!
Carrier has also now offered a refund for the time without coverage - but I had to ask about that, and resist their attempts to change me to a more expensive contract.
Hope this helps anyone else. Thanks razmmee209

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019).

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
I have never had any problems doing this before, only in the last few days.

I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place. And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated.

Mavericks Update - Error message - The product distribution file could not be verified

Help!
Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
Now I'm getting an error message - 'the product distribution fil could not be verified'
If anyone can help that would be great.
Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.

You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Why, when I open Firefox 4, do I keep having Firefox 3 pop up continually and having the error message "A copy of Firefox is already open. Only one copy of Firefox can be open at a time." ?

Every time that I try to use Firefox 4, Firefox 3 pops up on the Dock and tries to start up. I get the error message "A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I click OK and the message goes away. Then it happens again. And again. It doesn't stop until I quit Firefox 4. I've tried creating a new profile (and deleting my old one) and deleting the .parentlock and the profile.ini file, but nothing works. Help me please!

See:
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

When I try and launch Firefox, I get this error message A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help?

When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....

See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.

Error message when copying a music file from PC to BB

I get the following error message when copying a music file. Also I cannot delete any files.
"Cannot copy. The request could not be performed because of an I/O device error."

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error message: network copying over 31 characters not allowed, no ownership

Similar Messages

Maybe you are looking for