Error Message: No applications are set up or enabled for synchronization - BlackBerry Pearl 8130
The desktop software is not registering or recognizing my organizer sync settings. Each time I make my selections, the software confirms that I have sucessfully confirgured the product. When I select "Finish", the settings do not seem to be saved and the check mark in the box next to the title disappears.
Hi jgoodellperform,
Is there any change when you change the synchronization folder before configuring synchronization?
In Tools > Desktop Options in the Desktop Software, change the 'store organizer data to' to a different folder than the default then press OK and test again.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
ERROR MESSAGE - "no applications are set up or enabled for synchronization blackberry"
I own a BB Bold 9700 and have recently changed laptop using Windows 7 64 bit and Outlook 2010. Since upgrading to the new desktop software I am unable to sync my BB. I have gone through the configuration settings, but no tick marks appear having configured each of the areas e.g. calendar, contacts etc.
I followed advice on another message about uninstalling and reinstalling, but am still having the same problem.
Can anyone help?
Many thanks.
CraigHey Craig,
Welcome to the BlackBerry Support Community Forums.
When you put a checkmark for contacts, calendar etc. Go through the setup does it keep the checkmark?
Try moving the synchronization folder and then configure the setting.
Go to Tools>Desktop Options in BlackBerry Desktop Software.
And change the "store organizer data to:" to a new folder and press OK.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Montan Lion "kick out" My usb memory sticks, external Hard drives, external DVD /cd drive and give me an error message "PowerPC applications are no longer supported."
It does not matter what I plug in to the USB post, the results is the same ...
U use external hard drives, memory sticks (new and my old memory sticks), I also use an external cd / dvd writer LG Portable Super Multy Drive
They all run for ± 1 min then it loose contact and I get error messages like, error code -8062 or PowerPC applications are no longer supported..... etc -
When I try to install iTunes I receive the following error message: "Apple Application Support was not found".
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
I receive a message when trying to open Photoshop CS6, Illustrator CS6, etc., then when I try to follow the directions for troubleshooting, the installer fails to initialize.
Error message: "Adobe Application Manager is needed to resolve this problem. However it is missing or damaged". Then, after download, the program fails to load and displays this message: "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can see how stable they are.. How do I get assistance with Installer issues?
Any helpful thoughts?Hi David,
Kindly try out the steps in the below mentioned link to install Creative Cloud.
Error: "Installer failed to initialize" | Windows
Thanks,
Atul Saini -
Error message "the application APPLICATION_NAME can't be opened. -10810"
All of a sudden I started getting the error message "the application APPLICATION_NAME can't be opened. -10810" whenever I attempt to open an application. Sometimes all of the applications will work, but then all of a sudden one or two applications will turn unresponsive and I will get the above message whenever I attempt to open any application. Does anyone know what this error might be, and how I might go about fixing it?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Error Message "Delete price or set "Invoice Expected Indicator" in PO.
Hi Gurus,
We are in extended classic scenario with version 5.0.
We are getting error message "Delete price or set "Invoice Expected Indicator" when we are releasing the PO from Release PO option.
We are getting this error message in below situation:
We created shopping carts without vendor then after approval PO gets created in "Held status". When we edit the PO & add vendor then system gives error message "Delete price or set "Invoice Expected Indicator" (Line 1).
In this case the invoice expected indicator is not sets when we add vendor in the PO but if we create Shopping cart with vendor & when PO create din that case the invoice expected indicator is automatialy comes.
Can any one please help me to resolve this issue.
Thanks & Regards,
Manish
Edited by: Manish Mamidwar on Jul 30, 2010 5:40 PMHi All,
I have the same problem, Delete price or set "Invoice Expected Indicator" in PO
I have an Item Position of the PO that is Limit of Liability and for this position type I will not make invoice, then I would like remove the flag of invoice execution, but a recived your same message, can you tell me how did you resolve this problem?
Kind regards
Valentina Mari
Edited by: Fuffo Fuffi on Nov 10, 2010 12:51 PM -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.
" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
how do I get ITunes back when I get the error message :
The application "ITunes" unexpectedly quit while trying to restore it's windows. Do you want to restore it's windows?
I already tried reloading ITunes and it still doesn't startup.You didn't mention but are you still running a version of iPhoto older than iPhoto 11?
If yes, then go to the App Store and purchase the iP 11 app and install it. Back up your photo library first.
Once iP 11 is installed and has imported all your photos do a restart of the Mac.
This should resolve most issues with iTunes 10.6 and you should be able to run iTunes and sync up your iOS devices. -
I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.
If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way. -
suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. <Appleworks><MW_MSL_PPC>SHLB><Interfacelib><>"
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help...
Open Console in Utilities & see if there are any clues or repeating messages when trying to open AW6. -
cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)
Maybe you are looking for
-
Using a variable value in CDATA for generating an XML type in Oracle
Hello, I have prepared a function given below where I have some input variables & I have to generate one XML with those input variables as tag attribute value: create or replace function NEW_PROJECT_DETAILS ( p_ReferenceId in varchar2 , p_Project_No
-
Things that don't seem editable after you take a PDF file to word doc
It adds lines that can't be removed and some things are lighter grey in word whereas they were black in the PDF file. How do I fix these issues.
-
How to connect serial or usb or parallel port
telll me how to connect our application with serial port and how to detect weather the usb is connected or not
-
Hi oracle 10.2.0.1.0 I tried the following code CREATE OR REPLACE PROCEDURE load_lob AS id NUMBER; image1 BLOB; locator BFILE; bfile_len NUMBER; bf_desc VARCHAR2(30); bf_name VARCHAR2(30); bf_dir VARCHAR2(30);
-
Javac -classpath / -sourcepath does not work ?
when i call javac in the current directory (where the java source files within subdirectories for package names) the compilation works. but when i go one directory up and want to use the -classpath or the -sourcepath options, i just get errors: D:\TE