Error message "No business partner could be created for vendor ..."

Dear experts,
I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new BP role recently i must have changed the settings  and now when creating BP from vendor (FLBPC1) i get the following  message:
No business partner could be created for vendor"
The long text of the message is:
Message no. CVIV_UI013
Diagnosis
No business partner could be created from the vendor selected.
System Response
An error occurred when creating a business partner from the vendor selected. This error prevents data from being transferred and saved. This could be due to the following:
Fields have been left blank in the vendor that are set as required entry fields for the business partner.
Settings for assigning Customizing values for the vendor to the business partner are incorrect.
Procedure
Start the Post Processing Office and check the error message. Make the necessary corrections.
I have checked all my customizing settings one by one but cant locate anything missing or wrong.
Also, in 956054 it is said that i must perform various migration reports, but i believe if it did work before without running these reports, this couldnt not be the problem now.
Any help would be appreciated
Thanks

Hi,
reason is the following.
The customer / vendor doesn't use special attribute to differentiate
between persons and organizations - in opposite to BP.
You can achieve what you want to do by using a BAdI prepared for that:
You'll find this in IMG transaction SPRO:
Cross-Application Components
  Master Data Synchronization
    Customer/Vendor Integration
      Business Partner Settings
        BAdI: Data Assignment of Form of Address from Customer/Vendor t
Please read documentation of this BAdI in IMG.
You may use standard implementation CVI_MAP_BP_CATEGORY.
You also may create own implementation of the BAdI, if you want to
differentiate on other attributes.
Hope that helps.
Regards,
Franz

Similar Messages

  • TCode FLBPC1: Message "No BP could be created for vendor ....."

    Hello,
    We have the master data synchronization active for creation of BP from vendor/customer using TCodes FLBPC1 / FLBPD1. This was working fine too. Now all of a sudden from today when we are trying to use FLBPC1, the system gives a message "no business partner could be created for vendor...".
    Upon expanding the note we found that the procedure suggested is to open PPO and check the error message. We have the PPO active. Can someone please give me the exact steps to be followed to open the PPO and analyze the error?
    To be on the safer side I have once again checked the configurations mentioned in SAP Note 954816 and 956054 and have found that all configs are in place.
    I have also observed that in case where there is a configuration issue involved, the message would appear in red (ie an error message). But now the message is appearing in green (ie like an ordinary message) and therefore the configurations must have been properly maintained.
    Please help.
    Regards,
    Suvarghya Dutta
    Edited by: Suvarghya Dutta on Apr 28, 2009 10:38 PM

    Hello Rishu,
    First, many thanks for the kind patience to deal so extensively with the subject.
    To make sure that I have made my requirement clear, let me state:
    1. Presently there are several vendors in the system who uses the forms of address like Mr/Mrs/Dr/Miss/Company/Ms etc. ( Incidentally, is it possible to create a vendor as 'person' or 'organization' as such ?)
    2. However for ALL these vendors the system sends a message that BP cannot be created.
    3. Synchronization cockpit gives the message that all these 'forms of address are not designated for organization'.
    4. I am not looking forward to create a BP of any specific category of my choice.
    5. All I am trying to do is to create a BP for the existing vendors in the system.
    And now to make sure that I have understood what you are trying to say, let me reiterate:
    1. Vendors that presently have the form of address Mr/Mrs/Dr/Ms/Miss etc are NOT allowed by standard SAP to be automatically created into BP using the T Code FLBPC1.
    2. We must EITHER make a change in the vendor address to remove such forms as Mr/Mrs etc OR a code change in order create the BP from the existing form of vendors.
    3. In future all vendors should be created without the form of address Mr/Mrs/Ms etc.
    4. In the event the client wants to create a vendor with the form of address Mr/Mrs/Ms etc then they should do it in the reverse fashion...ie first create the BP of category 'person' and then create the vendor from the BP.
    ALTERNATIVELY this is what I found from exploring the system;
    I went to the following node: IMG - RE-FX - BP - General settings for BP - BP - Basic settings - Forms of address - Maintain forms of address.
    What I found is that in case I activate the tick for the colm 'organization' for the forms of address which are now giving error, I can then create them as BP successfully using the FLBPC1. Will that be a good option to activate the tick here?
    Request you to kindly let me know if my understanding has been right.
    Kind regards,
    Suvarghya Dutta

  • Getting error message in Business Partner search help

    Hi Experts,
    User is getting an error message while clicking the Search help for business Partner in all the transactions (FPL9, EEDM11, etc.).
    Only few users are facing this issue. We have compared the roles of the affected users and unaffected users and the roles are same. What will be the reason for few users getting the error?
    Thanks  & Regards,
    Dipin

    I'm not familiar with EEDM11, but FPL9 has parameter ids that can be set at the user level.  Look at
    System/User Profile/Own Data, Parameters tab between your two groups of users.  Also consider checking the settings in  Help/Settings, F4 Help tab.
    Lastly, you might try dropping debug on the error popup and see where it is being triggered from.  Maybe the answer is there.
    Regards,
    K--

  • Error message : No delivery items could be created

    Hi,
    I got this error message when I tried to create a delivery from the sales order. Appreciate if someone could advise me on what I have done wrong or missed out.
    Thanks!

    Dear Friend,
    As friend Srinath suggested, check in VOV7, whether the check box Schedule line allowed is checked for your item category..
    And also check in VOV6, whether item relevant for delivery check box has been checked or not for your schedule line category..
    Both should be checked..
    Also, check whether stock exists for that material in the plant mentioned in the sale order..
    Thanks,
    Venkatesh.S.P

  • Error message "No business area can be determined for item 000010"

    Hi all,
    I had maintained business area assignements.
    However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
    What does it mean ? And how can I fix this problem ?
    Regards,
    Bahia.
    Edited by: Bahia M. on Nov 13, 2008 11:58 AM

    Dear Bahia,
    Please go to IMG path assign the business area
    IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
    -->Assign Business Area To Plant And Division
    I hope this will help you,
    Regards,
    Murali.

  • Getting Message "No business partner found" in NOTIF_CREATE

    Hi All,
    I am getting an error message "No business partner found" when try to find the Person Responsible.
    1. Run Transaction NOTIF_CREATE
    2. Set Message Priority (e.g. Low etc..)
    3. Choose System / IBASE
    4. Installation No. will be automatically populated after choosing SYSTEM  or IBASE.
    5. Choose Appropriate Component.
    6. Choose Reported By.
    7. Person Responsible - getting error "No business partner found"
    Where as i have already created business partners via SAP Transaction BP, which i m able to view at step no. 6.
    Even in transaction IB52, the functions Contact Person, Employee Responsible, Service Employee Group, and Sold-To Party are assigned to appropriate users.
    could you please suggest something ?
    Thanks,
    Avinash

    Dear Ragu,
    First of all thanks for your guidance !!
    Yes, I have already created business partners through DSWP -> Create Business Partners.
    But in this case I am only able to create business partners for the clients I have on Solution Manager System and not for the clients (RFC's) from our Development Environment.
    When I click on Add button it shows me the different RFC connections through which our solution manager system is connected to development environment. if would choose any of the RFC which connects to solman to dev environment, it only shows me only one user CUST_SCOUT.
    I believe after choosing an RFC it should populate all the users avaialble on dev environment.
    Please let me know your thoughts on this.
    Thanks again for all your help !!
    Thanks,
    Avinash

  • ATP Check Issue - No business system could be determined for logical system

    Dear all
    Got an issue while executing ATP check on a planned order in product view,
    with a message: "No business system could be determined for logical system"
    CIF setting wise:
    regular business system group maintained and assigned in place,
    master data wise:
    business system group info fine in product master,
    Is there anywhere suggested to check under ATP setting:
    category, check mode, business event, check control/check instruction?
    Your kindest enlighting is appreciated,
    Thank you,
    mandy

    Dear Mandy,
    usually this error is caused by a missing customizing entry:       
    spro:                                        
    Integration with SAP Components
       Integration via APO Core Interface (CIF)
         Basic Settings for Creating the System Landscape                             
           - Maintain Business System Group
           - Assign Logical System and Queue Type :
    Please read the documentation for these two transactions and create the systems.
    You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO  says:                                                                               
    To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3  system to which you want to transfer data as logical systems.          
    I hope this helps.
    Regards,
    Tibor

  • Error "CRM business partner could not be mapped to an ERP customer

    Hello experts
    Kindly help
    I am creating quotation in crm web UI and  when  i save it it gives warning message "CRM business partner 65451 could not be mapped to an ERP customer"
    when  i checked in ECC system for same  quotation it is avaialble there .
    Then why this warning message is coming
    rply

    Hello
    You have to define mapping between CRM and ERP customer. The information which customer is associated with which BP is stored in CRM in table CRMM_BUT_CUSTNO and but0id. Use transaction PIDE on the ERP side to form mapping. Then work with load of customers.
    Such error appears when data about BP is entered in document directl but system couldn't find mapping in tables above. Hope it helps.
    Regards, EL

  • What does the error message "Sorry, but we couldn't create a repair because of the business repair mapping." mean?

    What does the error message "Sorry, but we couldn't create a repair because of the business repair mapping." mean?
    Trying to send it to Apple to get the battery replaced. iPhone 5S iOS 8.0

        StephAnnDLC, thanks for posting. Are you still having issues with the videos? How about the battery issue? Have you tried this http://bit.ly/102vuCF and retested?^SP

  • Error Job REFRESH_ADMIN_DATA_FROM_SUPPORT - Business Partner error

    Hello gurus,
    System: Solution Manager 7.0 Ehp1 SPS22  (win 2008 + SQL Server 2005)
    The problem is... I've been setting up the service desk for VAR option. We, our company, are VAR and the main goal for this configuration is link our own solution manager with our customers in order that they can send some messages to us asking for help. This type of service as you, is the Service Desk for VAR which runs on solution manager system.
    So in this point, we are in phase of configuration of customer numbers and system numbers of all systems that customers have in your landscape.
    We´re faccing with a problem about JOB -  REFRESH_ADMIN_DATA_FROM_SUPPORT  -  the job that collects information from SAP Marketplace of customers. And this job log have some error, namely we couldn´t create a Business Partner which are necessary further for maintenance business partner (tcode BP) and for IBASE generate!
    As you see in following image we have that error after that job runs:
    http://img263.imageshack.us/img263/3233/businesspartner.jpg
    09.04.2010 22:01:01 Business partner for customer number 813324 could not be created                     AI_SC_EN         137
    For your information, the customer number for our customer is 813324 and our customer number is 891916!
    I already check some view/tables, such the tables V_AIINSNRS ;  V_AISAPCUSTNOS and also the tcode AISUSER, and they seems to me well.
    Can you help me how can I solve that error.. on job!???
    Best regards,
    João Dimas - Portugal

    Hello Fabricius Zatti,
    Thank you for your answer, but that isn´t the solution for this problem. I already update that note 1023598...
    The other note 1350853 is not for my release, the correction of this note is delivered in Support Package SAPKITL431... my system has the last Suport Package Stack which is 22!! (SAPKITL432) So the correction of that note is already suported in system!
    Next I´ll show you what I have in tables v_aisapcustnos ; v_aiinsnrs:
    http://img97.imageshack.us/img97/8554/vaisapcustnos.jpg
    http://img97.imageshack.us/img97/272/vaiinsnrs.jpg
    And the transaction aisuser:
    http://img97.imageshack.us/img97/8662/aisuser.jpg
    In that tables and transaction are some data that is related and relevant for that JOB - REFRESH_ADMIN_DATA_FROM_SUPPORT
    Someone help me please.
    Best regards,
    João Dimas - Portugal

  • Possible to change the business Partner from a created Contract in ICWEB??

    Hello experts,
    I would like to know if it is posible to change the BP from a created contract in ICWEB.
    I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
    Can you help me, please??
    Thank in advance.
    Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

    Hello S Reddy and a lot of thanks for your help.
    But I don't know where I can select this option, there isn't the  where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
    Thanks in advance.
    Regards.

  • Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

    Hi I cant install the Management Console.
    I keep getting
    Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
    Has someone come across this problem before?
    I am using
    MS Server 2008 Std x86
    SQL Server 2005 SP2 Std x86
    MDOP 2008 R2
    APP-V 4.5
    Please can someone help.
    Thanks

    I'm running into the same problem myself, I have an almost identical setup.
    Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
    Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
    Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
    Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
    Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
    1
    [2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''. 
    2
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''. 
    3
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''. 
    4
    [2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff. 
    5
    [2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\ 
    6
        Copyright (c) Microsoft Corporation.  All rights reserved. 
    7
    8
        Description: 
    9
            This script creates all user-defined messages. 
    10
    11
            The types of messages allowed (and their severities) are: 
    12
            FATAL   - SQL Server Severity = 17; ours = 1 
    13
            ERROR   - SQL Server Severity = 16; ours = 2 
    14
            WARNING - SQL Server Severity = N/A; ours = 3 
    Can anyone help me shed some light on what's going on here?

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

Maybe you are looking for