Error Message no. C6009 while doing MB31

Dear Experts PP Gurus,
I have created one process order against that order i have completed MIGO and CORK but while i am trying to do MB31 subject error message occurs.
While double click on error message i got one new performance assistant screen in that i came to know error number and its
Diagnosis is
You want to post a goods movement for an order. However, the present status of the order (for ex. "created") does not allow goods movements.
Procedure is
Change the status of the order (for example by releasing the order), so that you can post the goods movement.
How to resolve this issue.Pls escalate the solution.
Thanks in Advance.
Regards,
Vijay Pabale

Dear VIjay
Go to Co02 Click the i- status
GO to Business process
Click the goods receipt for production order( In your case it will be in Red )
select and click transaction analysis
and Find which status is blocking the GR and let me know

Similar Messages

"HKONT is empty" error message is getting while doing MIRO

Hi Gurus
While i am doing MIRO, i am getting the error message of "HKONT is empty". What is this error & how can i resolve and where can i check this G/L Account belongs to what?
Thanks in adv,
Regards
BADRI

Starting in release 4.6C, MM delivers complete tax information to
the tax modules. But we are performing some consistency checks. Part of those checks is the test if HKONT is empty and
T007B-STAZF has not been filled, otherwise we expect to get a correct
account. There are no further issues in dealing with the flag.
The error message may occur because of wrong customizing in the
transactions FTXP and OBCN for non-deductible tax:
1) FTXP: for the used tax code, please check / set with the button
"accounts" the accounts.
2) OBCN: please check for all the account keys of FTXP if some of
them have the value 3 for the setting "Posting indicator". In that
case, please check / set the flag 'not deductible' (= T007B-STAZF).
Please refer to attached note
377271 MR1M, MIRO: error FF804 'HKONT is blank'
Please use transaction FS02 to set the tax relevancy on the control datatab for the G/L Account in question. Please see the solution in point
2 of SAP Note 395919 for more detail.
395919 MIRO, MR1M: Error messages when calculating tax
Please also, review the standard system design as outlined
in Note 39591. In the standard system design, must have the accounts
set as relevant to tax.

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

I keep getting a popup error message in Ical "server does not recognize name/password

I keep getting a popup error message in Ical "server does not recognize name/password" This started after they did the change to Icloud and extended our subcriptions.
Tricia

I guess that the server name is incorrect, then.
Did it ever work?
Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password.

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

HT201210 Just replaced the battery in my iPhone 4S. Before doing so I backed-up then wiped the phone. Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it?? :-(

Hello,
Just replaced the battery in my iPhone 4S. Before doing so I backed-up then wiped the phone. Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

TS3899 When I send an email I get an error message that the receiver does not allow "relaying" it doesn't matter who the recipient si

When I send/forward an email I get an error message that the recipient does not allow "relaying". It doesn't matter who the recipient is.

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server>SMTP>Primary Server then turn Server ON and fill in both User Name & Password>under Outgoing Mail Server.

After starting my computer today and trying to visit and open bookmarked web sites, I cannot open them because I am getting this error message: This web site does not supply identity information. What happened? How do I fix it? Thanks

Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
Bob

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Iam getting any error in infotype 0002 while doing enhancement ...

Dear all
could any one let me know why iam getting this error ,
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
i have just added an one custom field ...(zzname , data element is zzname type char 20)as per the business requirement.
regards
vamsi

Iam getting any error in infotype 0002 while doing enhancement .
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
when iam activating .................the structure i got the above error...........please urgent i have just added only one field

After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR

In attempting to upgrade CS6 CC I received this error message: U44M1P7. What does it mean

In upgrading CS6 CC I received the following error message: U44M1P7. What does it mean and how do I correct it?

It means that Adobe need to pull their act together and fix their awful application manager. Well, whatever. Run the Creative Suite Cleaner Tool, reinstall the programs, try again.
Mylenium

Error Message no. C6009 while doing MB31

Similar Messages

Maybe you are looking for