Error message: no hard disk found

When i click a link in outlook i get the message "no hard disk found". Everything else works perfectly. I can't click away the message, keeps coming back.

Does the problem link download a file? Firefox remembers the last download location on a site-by-site basis, and it's possible that location existed temporarily but no longer exists.
If it's not a download, if you hover your mouse over the link, does Firefox show that as part of the URL (down toward the bottom of the browser)?

Similar Messages

  • Error message with hard disk disabled

    Hey Guys,
    I have a probem with my ultrabook. Few weeks back my laptop suddeny gave me problem and windows won't boot giving the following error message
    I tried booting my windows through safe mode options, but nothing worked. I went to a computer technician and he told me that the problem is software not hardware related, and he suggested that reinstalling windows woud fix the problem. Concerned about my data, I asked him to retrieve my data from the hard disk which he was able to do. Later, I tried reinstalling windows 7 (through a bootable usb drive as my laptop does not have DVD/CD Drive). When I was reinstalling windows, it showed no hard disk availabe and asked to load drivers.
    At the startup when i press the power button, there was a black screen (one where you need to press Ctrl+I in order to go into configuration utiity, sorry that relevant image of that screen is not with me)showing the hard disk availabe of approx. 30gb . So, I press Ctrl+I to go into configuration utility and reset that 30gb hard disk to Non-Raid drive, and during windows installation this 30gb was available to me for use. But, my concern was that my laptop has two hard drive 500gb (SATA) + 32 gb (SSD, if i am correct). So i guess after resetting the 30gb hard disk to non-raid disk, I got access to it ( but I am not sure if this is correct, really sorry if my technical acumen is of annoyance), but not to the 500gb.
    I figured there might be connection probem of 500gb hard disk, so I opened it up and found that the technician hadn't connected the hard disk with the motherboard, and had placed it upside down. So, I made the connection and tried to start the laptop, and got this message.
    Here, you can see that it says hard disk is disabled. And when I don't press any key then I get this screen..
    I also ran the hp system diagnostic check, and my hard disk passed for both smart and extensive check. So, I believe that my hard disk is fine. And when I press Ctrl+I, i can't do anything with this hard disk, not even reset it since it says it is disabled.
    I went through many posts trying to find something similar to my problem, but found nothing to any avail. I would be grateful, if anyone could help me out.
    Thanks in advance.

    Hi @prateek88 ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you got a blue screen error on your notebook. You took it to a technician and he informed you it not hardware but software.  He did retrieve your data off the 500 GB hard drive.
    As your notebook has two hard drives a 32 GB SSD and the 500 GB SATA.  You disabled the raid configuration and were able to access the SSD.
    Were you able to complete the installation of Windows?
    If you have  Windows installed and have corrected the connection issue with the 500 GB drive would you try this.
    Raid configurations are beyond my support bounds just so you are aware.
    Reconfigure it back to the original raid.
    Try restoring the defaults from the bios screen.
    Check for a bios update for your system. and install if applicable.
    If this has not helped please contact HP support for further assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • NO HARD DISK FOUND

    i purchased a server sunfire x2100.
    i used its hard drive in different machine.
    Now to install solaris in this server i.e sunfirex2100 . I installed a harddisk from HP computer. Hence it is SATA hard drive of Samsung with model nos. SP0411c.
    Now during installation the error comes "NO hard disk found".
    so every time to work in solaris i have to put SUN OS CD.
    I think it needs drivers of SATA hard disk. but how can i copy it coz solaris OS doesnt open unless i put Solaris CD. how can i put drivers?? Even i am not sure whether its the problem related to drivers?? pls help.

    boot cdrom and put a boot block on it and it will work then.
    installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c?t?d0s0

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • HT1386 my ipad wont synch to my i tunes it shows error messages the required disk can not be found and the apps found on the ipad can not be determined

    My I pad wont synch to my Aplle or I tunes it shows the error message the required disk can not be found and the apps installed on the ipad could not be determined

    Quit iTunes, reboot your computer, restart the iPad and then try again. Use another USB port on your computer as well.

  • I am having issues with Time Machine. Error message "The backup disk image could not be created.

    Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset  to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
    TM sees it and it is mounted but cannot go any further. HELP?!!!!
    Thanks
    -A

    How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
    I can usually fix most my comp problems myself, but this new ExHD has stumped me.
    Thanks for your help.
    -A

  • Error message: Page Anchor not found: 188 when exporting to ePub

    I have been working on exporting a book from InDesign CC 2014 to reflowable ePub format. The book is about 250 pages long with numerous photographs, all of which are anchored objects. I am now able to export a good-looking ePub file, but I keep getting just this one error message, Page Anchor not found: 188, followed by the pathname for the file.  I don't see a problem at page 188, but I'm not very experienced with InDesign.  I have done several searches, and I'm not sure exactly what a "page anchor" is. Can anyone help me figure this out?  Can I just ignore this error.  Thanks.

    I had similar problems which were resolved when I anchored images only within text with styles that would not be included in the TOC, and also made sure there were no blank paragraphs (unnecessary hard returns) with a style that would be included in the TOC. Hope that helps.

  • I constantly get the following error message: The backup disk image "/volumes/data/ james kehoe.sparsebundle" is already in use.

    I constantly get the following error message: The backup disk image "/volumes/data/jameskehoe.sparsebundle" is already in use. This Time Machine/Time Capsul worked perfectly before I left on a four month trip. Upon returning to my domicle it will not backup and I get the mentioned error message. My wife's Mac Book Pro continues to backup normally but she did not accompany me on this trip so her computer has always remained in contact with the Time Machine. My computer is a MacBook running 10.7.5
    Any help solving this problem and letting me once again backup my computer would be greatly appreciated.

    This question is asked several times every day.. it is a bug.
    Look at the more like this column to the right..
    Solution is pretty simple..
    With the TC hard disk not running.. you can feel the vibration ..
    pull out the power cord.. count to 10.. plug in the power cord.
    If you still have the problem report back.. mostly 98% of cases that will fix it.

  • My computer keeps giving me an error message "non sysetm disk or disk error replace and strike any

    My computer keeps giving me an error message "non systne disk or disk error replace and strike any key when ready"  It is a HP elite notebook.  WHen I strike any key it looks as though it is running scripts and return to the above error.  Is there a way to reset the computer to a point in time when it function normally?

    My suggestion is to start unit and press F10 to get into BIOS. Navigate to Diagnostics and select Hard Disk Self Test. This will test your Hard Drive for errors and failure. If the hard drive does not pass both tests, you will need to replace the hard drive and obtain recovery disks.
    I work for HP.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • Time Machine error message: The backup disk image could not be created

    I got a new MacBook the other weekend and Time Capsule. I have set up the time capsule, its light is green, it shows up as a device in my finder window and the printer it shares is accessible.
    The problem is when I try to run time machine I get the error message "the backup disk image could not be created" I have the time capsule selected as the drive I want to back up to. I have read through all 150 help topics on the Mac Support page regarding time machine and am now turning to you the community to help!

    I found an answer in another place on this forum...http://discussions.apple.com/thread.jspa?threadID=1422065&tstart=330
    Just have to give my computer a name under system preferences/sharing

  • Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    Can you start QuickTime on your computer?
    You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

    Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

    how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

    The troubleshooting C17 is the specific article.
    http://pondini.org/TM/Troubleshooting.html
    This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
    So download the real utility. Run it instead of v6 toy version.
    http://support.apple.com/kb/DL1482
    Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

  • HT3275 My time machine does not back up and giving me this error message: The backup disk image "/Volumes/Data-1/Amiel's MacBook Pro.sparsebundle" is already in use. Pls help.

    My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.

    Make sure that there are no other Macs backing up at the present time.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back in
    This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.

Maybe you are looking for