Error Message no. MM214 while creating material master
Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards
Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P
Similar Messages
-
Runtime error while creating material master data
hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION... -
I want validation while creating material master with profit center
Dear Experts,
I want validation while creating material master with profit center.
If 0001 plant having 100100 profit center
0002 plant having 200200 profit center
Material A cant be created for 0001 plant for with wrong profit center 200200.
Kindly help & provide me solution clearlyHi,
Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
You should put in your validation control in the material master user exit. One of the exits you can use is
MGA00001 Material Master (Industry): Checks and Enhancements
Thanks & regards
Hameed Parvez -
MG144 Error Messages while creating Material Master
Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VRGo through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing -
Error while creating material master
hi,
I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
"Tables TCURM and T001W inconsistent; notify your system administrator" .
could any one draw some light on this.
thanks regards,
chintathis is not application server specific problem.
Suggest you to go to [Logistic/MM forum|SAP ERP - Logistics Materials Management (SAP MM);.
regards,
Vincent -
10 digit code need to be created while creating material master
Hi, Please advise how to create a 10 digit code automatically when we create material master in SAP? Please note that this code is required as one of the basic data view fields, not as material code. Is there any enhancements available for the same.
Dear
Try to use Product Hierarchy field MARA-PRDHA in the Material Master for this purpose
Regards
JH -
Update Termination while creating Material Master MM01
Hello,
While creating the Material Master system is throwing the error Update was Terminated.
Before that we have client copied.
Can anybody throw some light??
Regards,
Kumar RayuduHi,
Check the material number ranges are copied ?
in SPRO>LOGISTICS GENERAL>MAT.MASTER>BASIC SETTING>NUMBER RANGES FOR MAETRIAL TYPES
BR
Diwakar -
Copy of Storage bin while creating Material master
Hi,
When I am creating a material master by coping a existing Material Master (which has WM view and Storage bin maintained), system does not copy the same Storage bin to the material which is getting created
All the informations are copied except the Storage bin,
We need this for some business reason
Is this possibleHi,
We are creating the Material master copying exisiting material for Plant --> Warehouse --> Storage type -
Problem while creating Material Master (MM01)
Gurus,
I am novice to sap sd, and I am trying to create a Material (MM01) for a Customer, and have given the inputs 'Material', 'Industry sector' etc.
To my surprise, I am unable to see ' 'Sales org 1' , 'Sales org 2' ' Sales : General plant' tabs .
Should I need to enable something to view these tabs ?
All I could view is 'Organizational levels' ' check screen data' ' Additional data'
Kindly bare for this silly question!
Thanks,
KarthikHi,
Try to create a Material in this way. Check whether you are using same steps.
Go to MM01
Enter Industry sector & Material type (Eg: FERT - Finished Products)
Click on "Select view(s)" button option without pressing Enter key directly.
Then you should be able to see all tabs listed in "Select view(s)" pop up window.
Check whether "View selection only on request" tick box is marked. If it's marked, Un-tick it. If you have marked that, then this screen will not automatically appear.
Highlight relevant tabs.
Press "Organizational-levels" button in that pop up.
Enter relevant Sales Org/ DC & Division.
If "IOrg. Ievels/profiles only on request" is marked, then Un-tick that also. Its for same purpose as above.
Press Enter.
Now check whether you get those tabs in the Material Master.
Best regards,
Anupa -
Error message I need while creating PO
Dear Experts.
I need to set error message when we try to convert deleted purchase requisation into Purcahse order.
Pls can any one help how to set.
Thanks in advance,
With Rgds,
VinodTry setting the message 06 050 Purchase requisition & item & already deleted to an "E" in the purchasing system messages in the SPRO path Materials Management -> Purchasing -> Environment Data -> Define Attributes of System Messages and then choose System messages.
Hope this helps. -
PO_CUSTOM_PKG - Error message not appearing while creating dist line
Hi,
We are trying to incorporate business logic using the POR_CUSTOM_PKG. Where as we have a requirement to add custom validations at the time of defaulting the requisition distributions. We are using PROCEDURE custom_default_req_dist for this purpose. however if any validation fails we need to display error message and we are not able to see the error message even after setting the result_code t0 2
Can someone let us know what may be the problem or how to resolve this?
Thanks
VenkateshHi,
You need to use "custom_validate_req_dist" procedure in order to perform any validation in the requisition distributions data in iProcurement and display appropriate error messages.
Thanks,
PS. -
Duplication in part numbers should not accepted while creating material ma
Hi all,
How can i set Duplication in part numbers should not accepted while creating material master. How can do this requirment plz help me.
thanks
rameshhi,
please check is there any user exit or BADI available and make use of it. -
Error message AA119 while creating asset master through AS01
Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DDDear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD -
Create material master get error message
Hello Guys,
I get the error message as below when i create material master . can you help me?
error message
nternal error in FORM/FUNCTION ckms_buffer_write in position 19 with RC 0
Message no. C+099
Procedure
Please inform your system administrator.
Thanks and best regards,
AlengaoDebug the program with help of ABAPer and check it.
Also pls check these NOTES,
414204, 933809, 390655,0001096890
0001126497
0001164684
0001230454
Edited by: Afshad Irani on Aug 12, 2010 3:12 PM -
Hello Guru's Error MSG while creating Material Type HERS
Hello Guru's,
While creating material type HERS the system is showing the following error *"The field orign acceptance is defined as a required field; it does't contain an entry'"* will any one give solution.
even i have filled orign field in info record also still it is giving same error message, will anyone give solution.
full points for the answer.hers is for the mpn
note the techincal name of that field and then go to oms9 and there make that filed for the filed selection key of hers as optional
u can get the field selcton key of hers from the tcode oms2
Maybe you are looking for
-
Macintosh HD won't mount in Mac, but can be seen in Windows
So, of course there was a bad storm here in Florida and my computer shut down and now won't start up. When you try to start it, it gets to the apple and the loading bar but just shuts off after the loading bar fills up. I got in with the recovery d
-
Windows 7 x64 iTunes 10.4 doesn't recognize backups
After latest update in Preferences -> Devices none of backups are showing. When "syncing" iTunes doesn't create backups. Why?
-
% to sales formula required in Structures _ FI Report
The Finance Profit / Loss report involves using of structures. Structures are elements with different GL account groupings Structure Elements Balance % to Sales Sale 150000 100% Materials 32000
-
Change Formatting of Footnote Indicator when Exporting EPUB, how? CS6
Hi, Well, it's all quite impressive so far. CS6 ePub capabilities are miles ahead of CS4, my last version, that's for sure. One thing I'm stuck on, though, is how to change the formatting of footnote indicators when exporting an ePub from InDesign. N
-
Business Catalyst Help | Transferring Sites between Partners
This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/partner-portal/transferring-sites-partners.html