Error message: no printer is selected. How do I do it in PS6 64 bit

Get the message that I have to select the printer when I try to print. Then open a new photo and print it. Where do I choose a printer?

You can select a printer from the Printer Selection area in the Print dialog box (File > Print). All installed printers are displayed in the list.
Are you able to print from other Adobe applications? Non-Adobe applications? If you don't see any printers installed, you'll need to check at the Operating System level and make sure that you have a Printer connected and can print from other applications.

Similar Messages

  • I cannot print from Websites or my college online course. Tries to save files to desktop as an .xps document but nothing happens and I get an error message that print command did not work. Have reinstalled firefox and adobe, no help. Any suggestions?

    Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?

    {Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

    frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

    I haven't been able to try this fix, but someone emailed me the below fix:
    I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
    It worked for me. Hope same for you.
    I'm planning on trying this fix soon.  Let me know how it goes for you if you get to try it before me.  Will do the same.  Thanks,
    Chad

  • Mac os x 10.7.5 - pixma mg3220 - connected usb gets error message " the printer is not connected"

    hi, I'm a newbie wrt to mac printer operation.
    1.I installed a mg3220 using the wps button on my smc barricade router and can print wireless with a windows 7 printer.
    2. my wife has a mac. The printer is on and connected direcly with the usb cable.
    she gets the error message " the printer is not connected".
    how can we override this error message and print via USB?
    thanks and regards.
    jmpaq

    Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
    Go to System Preferences.
    Click on "Print & Fax"
    Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
    A button appears that says "open scanner"
    The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with.

  • Did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

    did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

    Why not contact HP tech support for assistance since they make the printer. While on their site you can look for an updated printer driver. Otherwise, try deleting the current installed driver, reset the print system, then reinstall your printer's driver.
    Mac OS X- How to reset the printing system

  • Error message on print window for Vista--"out of paper"--I just loaded paper...?

    error message on print window for Vista--"out of paper"--I just loaded paper...?
    What can I do to get it to print?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Error message when printing Sales Order

    Hi,
    I get following error message when printing out a sales order just created.
    No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
    Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
    What could be the problem?
    Thanks,
    Ajay Audich

    Have you tried with system PLD?
    Thanks,
    Gordon

  • When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/782039]</blockquote><br>
    When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

    Protocol error usually indicates that the very leftmost part of the URL is not recognized.
    So http://, ftp://, rtsp://, usually work.
    ableton:// would need to be added by some software somewhere...
    Can you get instructions from the vendor? Does these posts seem relevant:
    [http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds&#0093; Bug with Fireforx browser and downloading project?]
    [http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck&#0093; Problem downloading shared sets from Ableton server.].

  • We use Adobe Acrobat 10. When I try to download the most recent update, I get the error message 1608 download failed. HOw do I fix this.

    We use Adobe Acrobat 10. When I try to download the most recent update, I get the error message 1608 download failed. How do I fix this?

    uninstall acrobat, clean (if windows os), Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs and then reinstall.

  • I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

    I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

    There have been problems reported with Sync.
    They are working on it, so please try again later when those problems are fixed.
    *https://services.mozilla.com/status/
    *http://twitter.com/#!/mozservices

  • When attempting to download a podcast I get an error message "stopped err=404.  How can I find out what err=404 is?

    When attempting to download a podcast I get an error message "stopped err=404.  How can I find out what err=404 is?

    404 is a http status code meaning it could not find the link, presumably the subscription link is down or has moved.

  • "Communication Error" message when printer is the AirPort-connected

    After two years of using (and hundreds of pages printed), the printing on the Epson Stylus Photo R340, connected to the AirPort Express ('n' edition) ends just after a few centimeters of printing (now it's in 100% cases), showing one of the error messages below:
    - Printer paused (resuming/re-pausing leads to no further progress). In this case the printer is sometimes paused also un System Preferences > Print & Fax, but resuming in this level again leads to no progress
    - Printer shows "Communucation Error"
    - Printing dialog shows no error or pausing, but the result is the same as above
    Removing the print task in printing dialog doesn't have any influence on the printer. In all these cases it's necessary to turn off the printer to start from the beginning.
    When the printer is connected straight to the computer via USB cable, it prints as expected.
    There were no software installations recently, except Apple system updates via Software Update.
    Does it mean that Apple kisses the air printing goodbye or there's still hope to fix it?
    Thanks for any ideas

    Hello Syd,
    thanks a lot for your suggestions. I appreciate Epson is monitoring forums like this! As I wrote above though, some of them I mentioned as performed (printer connected straight to USB port of the Mac). I also several times erased all the printers and added them again fresh, but unfortunately all still the same.
    Just a few weeks ago, I printed a few dozens of pages and this happened after every about 20 pages and after printer restart, I was able to continue. Since I started this topic, the printer will not finish any single page over the AirPort Express, but prints fine when connected directly to the mac via USB.
    I just don't want to bring it across the house (yes, I know I can share it on one computer for the others, but there's no room near the computer I work on and in addition, it worked before...).
    So it looks like bad luck for me so far...
    Message was edited by: Bjoehy

  • Error message asking me to reinstall - how do I do this without a disc?

    Error message asking me to reinstall - how do I do this without a disc?

    Hi Mmp255,
    Please use the below link
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
    Thanks

  • Multipass F30 has error message "check printer" then "wrong cartridge".

    Multipass F30 has error message "check printer" then "wrong cartridge".  When I open the lid the printhead does not move to center.  Manually moved and replaced cart with 2 new black carts. No change. removed power for 15 minutes. No change. What do I do next?

    Hi DSCkeith,
    It looks like you've already gone through the normal troubleshooting we would do to try and fix this issue.  If what you have tried has not resolved the issue, service would be required.  I recommend using the Contact Us link to get in touch with our support staff.  They can provide any applicable service options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Error Message at print select time

    Product:  HP Officejet Pro 8600 eAll-In-One multifunction printer; Using Windows 7, Pro 64-bit; no changes were made to the system prior to this error appearing.
    The Problem: Starting yesterday (Jan 28, 2012), every time I select the print button, this message appears:  "Paper Too Short to Auto-Duplex".  Before printing will start, I have to click OK on the error message.  I've looked at every setting I can think of and can't find what caused the message to appear, and I can't find out what will make it stop.  The actual printing is fine; it's just the aggravation of having this message appear each time and having to click OK to start the printing.   Anyone familiar with this problem and how to fix it?

    Hi 
    Here is the solution:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HPOJ-8600/m-p/1487519/highlight/true#M...
    Happy Printing.
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

Maybe you are looking for

  • THere is a charge on 1/17 to my account $100.  Not listed in purchases and no idea what for?

    THere is a charge on my credit card for $100.  WHen i go to itunes purchase history there is no such charge.  I have checked online support and called the numbers but don't get  aperson so cannot resolve this charge.  HOw do i find out what it was fo

  • Stopped Filter Falied

    HPC7280 All in one Printer.  Connected to my Mac Book Pro but when trying to print keep getting error message. Stopped: filter failed 

  • Could not save because write access was not granted (Mac OS)

    I keep getting the above error when working off of my xserve in photoshop. It is new in CS5 which we have recently upgraded to. Several people at my office are getting it. Sometimes it displays a random name with afp in front of it (I assume it is th

  • Rescue workspace from damaged installation?

    Hi everyone I'm having a somewhat unique situation here. I have been the one who has been installing and using APEX for years now, and everything has been fine. However, we switched hardware architecture a while back (which I wasn't in charge of) and

  • Cannot deactivate CS3 but can CS4

    I have AE CS3 as a single program, BUT I have CS4 design premium which does not include AE. I am just about reinstalling windows and succesfully deactivated CS4 design premium. However, AE CS3 cannot be deactivated saying there's no internet connecti