Error message "Not a valid Win32 application" when I try to install

I have downloaded the setup software several times but I cannot get any of it to load. I get the message that it is not a valid Win 32 application. I am running Windows 7. I have no problems with Thunderbird on other machines. There are no help paragraphs anywhere in your system that address this issue - at least not using the available public index.

if the installer is not valid, it will be because it has been corrupted in the download process. Usually by an over helpful anti virus program. As the installer is basically a 7Zip executable some corporate system will not allow the executable to run as it contains a ZIP file.

Similar Messages

  • HT4796 I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    That's a Windows PC issue. What is the Mac OS X Lion issue? In other words what are you posting in the Lion forums about?

  • Error message, not a valid win32 application

    Please help if you can, because I am new to computers. I have downloaded itunes (setup), which is only 11 meg, but it should of been 56 meg. When I click on it now, it say's run, then itunes setup exe is not a valid win 32 application.
    I have tried this about 4 or 5 times, even deleting the whole file and re-installing several times. Please help, many thanks

    Have you had a look at this troubleshooting page? It may be of some help: iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

  • I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
    If you go to Settings>General>About how many GBs are specified as being available?  If you are low on space maybe deleting some apps may help.

  • Error 'RecoveryMgr.exe is not a valid Win32 application' when trying to restore in Win7

    I really hope someone can help as this is driving me mad!
    System details - G62 Notebook running Windows 7
    The notebook crashed after a Windows update and wouldn't boot up.  I made it into the recovery manager and back my files before restoring to factory settings. 
    Since getting back in I am unable to get my files back.  I have tried through the recovery manager but it does not allow me to see the files on the dvd.  I have also tried through backup and restore but no joy there either.  When I click on RecoverMgr.exe on the dvd I get error 'RecoveryMgr.exe is not a valid Win32 application' and it won't open.
    I hope someone has managed to solve this before as I would love my files back.  All suggestions greatly appreciated and thanks in advance.

    Thanks Mumbodog.  Unfortunately I have tried and the files won't copy.  Starting to think they are corrupt!  Have tried on a few different PC's but no luck.  Really annoyed   Any other suggestions?

  • Loading versions 4.3 & 4.2SP2, error message: "not a valid Win32 app"

    Hello, I've been trying to install two versions of BDS, and both download fine, but upon clicking on the icon to install, I get the error message: "(name of app) is not a valid Win32 application".....does anyone know what the heck this means and how to fix it? Thanks much, Aaron Worley

    Hi, I'm having the same problem. Has anyone got an answer.
    I suspect it could be something to do with x64?
    Help? 

  • Why do I get the message "not a valid Win32 application"?

    When I right click to install the program, I get a message that says "not a valid Win32 application".  I don't know what this means or what to do.  Can anyone help me?
    Elena

    I'm sorry, I want to download the trial version of Lightroom 4.  It copies it into my Downloads folder.  Then I click on "Lightroom_4_LS11".  That is when the message comes up that says:  Not a valid Win32 application."
    I really appreciate your trying to help me here.
    Elena
    Sent from my iPad

  • After conversion error reading not a valid Win32 application please help

    After uploading and converting my pdf to excel, i can not openthe file it reads not a valid Win32 application, what have I done wring
    thanks
    WW

    Good day WW,
    It sounds like the extension for the file may have been stripped when you downloaded the file after conversion.  Try renaming the file with a .xlsx extension or convert the file again and ensure it saves to your hard drive with a .xlsx file extension.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • When I try to open Firefox 4.0 I get an error message saying that it is not a valid Win32 Application. What do I do? I am using Windows XP Sp3

    I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?

    [[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.

  • ITunes set up gives an error message saying not a "valid win32 application"

    I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • When i try to install Firefox 4 on my 64 bit Windows 7 Ultimate, error that it is not a valid win32 application

    When I downloaded the Firefox 4 installer and tried to install the software, an error message appeared that the application was not a valid win32 application. have deleted the file, re-downloaded it but with same effect. Therefore I cannot install Firefox 4
    I have Windows 7 Ultimate 64 bit, 4 GB internal memory,
    Intel i7 processor. language English

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See "Disable virus scanning in Firefox preferences - Windows"
    * http://kb.mozillazine.org/Unable_to_save_or_download_files

  • I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download i

    I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Error when installing VMM - %1 is not a valid Win32 application

    Hi all
    I'm attemping an install of SCVMM and despite installing all prerequisites I'm faced with the following when I launch the installer/disc and click 'Install':
    "Error starting the Virtual Machine Manager Setup Wizard. %1 is not a valid Win32 application"
    this error is the proceeded with another:
    "Microsoft Visual C++ 2010 Redistributable was not successfully installed. The selected Virtual Machine Manager feature cannot be installed without this prerequisite. Retry setup or manually install Visual C++ 2010 Redistributable
    from Microsoft Download Center."
    The latter package is already installed and I have re-downloaded and re-installed as well to no avail. All .Net packages are installed too.
    I'm running a Windows Server 2012 R2 x64 virtual machine in a HyperV host (HyperV Server 2012) and have navigated the disc and launched the "SetupVMM.exe" located in the amd64 directory as I realise the above Win32 error points to a x86 application
    - still no joy, the same errors!
    I have tried the installer in a VMWare 2012 server with the same error and on a physical Windows 7 machine again same error so this makes me think I'm either missing something basic or have overlooked something seems the environment doesn't seem to make
    a difference (although obviously not attempted a x86 environment but SCVMM is listed as x86 or x64).
    This is for a lab test and personal experience before production so I realise running SCVMM within a virtual machine that is hosted on the same hypervisor isn't good practice - but it's a start :)
    Thanks in advance for any help you can give me.
    Sam

    Are you installing directly from the ISO? If so, you can try with a new ISO in case this is broken. Also make sure your machine is joined to the domain and that you are executing the setup in the context of a local administrator.
    Eventually, try to copy the ISO to local disk and run setup from there.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • "not a valid Win32 application" message when trying to install iTunes 7.0

    I have downloaded the new iTunes 7.0 setup file. When I click on the icon on my desktop, I get the message, " C:____\iTunesSetup.exe is not a valid Win32 application".
    This problem doesn't seem to be specifically addressed in the troubleshooting suggestions on this website. Does any one have any suggestions on what I can do to resolve this problem? I've tried uninstalling older versions of iTunes and Quicktime, and re-downloaded new software package, but problem continues.

    After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

  • Error message "play.exe is not a valid Win32 application"

    when I click the play.exe file I get a error "play.exe is not a valid Win32 application" please can I have some help understanding why the player wont op

    some information would help understanding the issue-
    which operating system you are working on?
    which version of UPK was used to create this play.exe?
    does it work on other similar machines?
    -SD

Maybe you are looking for

  • How do I get PDF files to *automatically* save as the file name provided by the source?

    When I download a PDF file in Firefox, the file name changes from whatever name source used (e.g, important-report.pdf) to a miscellaneous group of characters (e.g., X2ba5zt.pdf). I often want to save the file using the 'source' name. I realize that

  • Problem in translation hub

    Hi to all, i am new to translation hub . i created a new project under newproject after that i used imported files and imported the some reports(.rex).i am not able to see the priview, when i am clikcing the prieview then i am getting the error. the

  • Invalid Key Exception: Unsupported key type: Sun RSA public key, 1024 bits

    I am trying to retrieve certificates from Microsoft Keystore and extract its keys using SunMSCAPI in jdk 1.6. It gives me an invalid key exception, when I am trying to wrap the Symmetric key (which was previously used to perform AES encryption on dat

  • My Iphone 5 just stopped responding,

    I was scrolling on a app and my whole phone suddenly became non-responsive. Every time I press something a box outline appears around it. Now that its locked I can't open it anymore. I've tried restarting it and rebooting it, nothing has worked What

  • Is there any way to figure out what this transport error is about?

    HI, I am getting the following transport error from the log:                       u201C R3TRROUT4BHOQZTDNV4U6BLY12MUXO6C6 not found; object also deleted in target Systemu201D                                                                    Followi