Error Message not in Oracle documentation

Hi
I am looking for the following error message in the Oracle documentation:
ORA-13365
It is not in the documentation that I have.
Thanks
Caroline
null

Caroline,
Here is the text for that error message.
It is missing from the Oracle documentation.
13365, 00000, "Layer SRID does not match geometry SRID"
// *Cause: Spatial layer has a geometry with a different SRID than the
// SRID specified for the layer.
// *Action: Make sure that all geometries in a layer have the same SRID and
// the SRIDs match the SRID in USER_SDO_GEOM_METADATA for the layer.
null

Similar Messages

Getting error message ORA-01034: Oracle Not available

Hi
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?
if yes can some one please guide me how I can create database...
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)

ParikshitBhandari wrote:
Hi
Welcome to the forum.
Before proceeding, please read the forum FAQ. The link is in the upper right corner of this very page.
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?Yes, it is because you have not created a database.
It is A Good Thing (tm) that you actually copied and pasted the entire error message. Some here seem to think "it doesn't work" is an actionable error message. However, for future reference, error messages are the result of something happening. They are far more meaningful if you were to also copy and paste the command that triggered the error.
if yes can some one please guide me how I can create database...
Easiest way is to use the utility 'dbca' (database configuration assistant).
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Error Message: Not enough memory for operation.

Hi All,
I'm having problem when try to connect to Oracle DB, check my details as below :
Connector : Microsoft ODBC for Oracle
Database Expert : Using Stored Procedure to populate data to excel.
Server Used: DBCCSWST125.reportjobserver
Error Message: Not enough memory for operation
Problem occurred when I tried to use stored procedure in my rpt file.
Thanks.

You are using multiple versions and it's still not clear what is happening but the CR 2008 reports should not be published to BusinessObjects Enterprise XI R2. CR 2008 has functionality that XI R3 does not support.
Create reports in CR XI R2 for BOE R2.
Also, your version of Enterprise has not been patched. You should have a Support contract which will allow you to get into our Gated site and update BOE. Then it may work but check with your administrators first before patching BOE.
Thank you
Don

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

I keep getting error message "not enough space on startup disk" on my macbook 10.6, even though I've deleted and compressed many files. Could something else be the problem?

Somehow 1500 web pages were downloaded into my iphone app! That's when the trouble began Now, I keep gettig error message"not enough room on your start up disc. "So I deleted most of theml, but when I compress/delete files, it doesn't help. Now i'm unable to back up to a disc, because I get a similar message about lack of room.. I can't download apple updates or printer updates. My computer is almost unusable. When I took it to the Apple store they had no idea what was wrong.
I bought an external hard drive-Free Agent Go Flex which doesn't seen to function, and has no user interface and apparently little tech support. My cursor is all over the place. No one at Apple seems to be able to fix this computer. Any suggestions for my next move?
Thank you.

See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417

Version 31.3, error in upadting RSS feeds. Error Message - not a valid feed.

After upgrading to version 31.3, error in updating RSS feeds.
Error message - not a valid feed.
Unable to Attach screen shot of feed validator results

The answer is in the guide, please read it carefully:
https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so.

QAAWS error message "not a valid query"

Hi,
When I'm trying to connect to QAAWS I get this error message: "not a valid query. FWB 00025".
Does anyone know how to solve this problem?
The server where the BOE is installed on has been restarted a couple of times but it doesn't help.
Universe Designer and WebI work fine.
Thanks!

Is QaaWs running properly on your system?
To validate the installation, open a browser and type the following URL
http://[server]:[port]/dswsbobje, where [server] corresponds to
your web server address and [port] corresponds to the port where you
set up in your web server. The default used by Tomcat is 8080. dswsbobje
is the default name of the Web Service provider web application. Then Validate.

HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8

I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

I can not take pictures or back up my phone due to error message not enough storage.I have all of my data turned off and still can not back phone up.? I have deleted lot of pics and messages and still get message..

I can not take pictures or even back my phone up due to error message not enough storage I have went into manage storage and turned all my apps to off and I still get error. I also have deleted a ton of pictures and apps.

Hi there mistib,
You may find the information in the article below helpful.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
-Griff W.

Text messages on iphone 5s getting error message not delivered

when attempting to send a text messages on iPhone 5s getting error message not delivered with a red explanation mark. I have filed cases with carrier and it comes back as device, some messages do go thru fine and then it will give the error for several message and then back to working again. Please Help.

Hi
I am NOT trying to be mean or patronizing so my apologies if this comes across that way
That said
SMS texts are sent on a part of the same carrier wave that carries voice calling and conversation as opposed to data - which is why even non smart phones can text - it is the unused portion of the spectrum that initially carriers were making money off of
http://computer.howstuffworks.com/e-mail-messaging/sms.htm
In other words - to be able to text - one has to have a plan that supports that
Also that is why in some plans international texts have a cost whereas one can merrily iMessage from anywhere in the world and get away with it free
So - if the texts are not leaving your phone - chances are that they do not have a channel to do that - that is an AT&T issue

HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

Error message "not digitally signed or not signed in the appropriate manner

My computer keeps crashing and I discovered that it is not recognizing a hardware device. The device is the printer. When I check further, it asks for driver updates and when I try to do that, I get an error message "not digitally signed or not signed in the appropriate manner.
I have no idea how to fix this since I am the administrator and I have an HP laptop too. Any help is great.
Thanks,
Sonja

Welcome to the community, Sonja! Aka @sonipsl
I have personally ran into the error message you are receiving before that states "not digitally signed or not signed in the appropriate manner", and I had posted a solution to it as well. I would like for you to see the steps that had fixed the problem in my first link below. You will notice that you will have to download the correct drivers for your printer, the Photosmart B210a model, and that link is also below.
Click this link and try the steps in my post: Solution! Re: Getting Error when updating Driver for D110a
This is link to get your drivers for your printer model: HP Photosmart Full Feature Software and Drivers
I hope this does the trick! Please write me back to let me know the outcome
Enjoy the rest of your Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error Message:Not enough balance in bond/UT1

Dear Expert,
I am creating ARE1 document excise under Running bond through tr cd J1IA101 in development client but at the time of posting ARE1 document system is giving error message" Not enough balance in bond/UT1: 0000010019 / 2010" Message no. 4F227 (error)
and "Reservation amount is greater than the balance in the bond!"(warning)
I checked the balance in bond it is really less but my client some times creating ARE1 document with negative bond balance because of delay in proof of export document for previous ARE1 documents and now we are implemening the ARE1 generation through sap.
i want to know is it possible to change this error message to warning message or is their any other way to allow the system to generate ARE1 document with nagative bond balance.
thanks in advance
warm regards
ravi

HI
this is to inform you that
LSEUAF04                          1207         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                     RAISING NOT_FOUND.
                                  1258       MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                   RAISING NOT_FOUND.
                                  1273         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                       SCOPE_OBJ RAISING NOT_FOUND.
the error which you are showing in the thread is dynamicall called from other program through the variables.
convert this error message to warning message
hope this clears your issue.
balajia

Error Message "Not Enough Memory to Open Illustrator"

Hi,
Im running adobe illustrator cs5 on windows 7 and have previously had no problems. Today however when I opened a pdf I got the error message "Not enough memory to open illustrator" I have searched and cannot find a reason for this error. It now happens nearly every time I open a pdf. I increased my windows 7 virtual memory, however, this does not seem to have any effect. Any assistance would be appreciated.

Something is blocking PDF handling (a security tool) on the system level and/or one of the shared Adobe components for PDF handling has been updated/ changed, most likely. Do the PDFs properly open in Acrobat/ Adobe Reader? Investigate these things. Also of course simply trash your AI prefs to make sure you are not a victim of tainted config data...
Mylenium

Error message "Not Well Formed." Can this be repaired?

Help!
I have been attempting to open an InCopy (CS6) file, but it will not open. Instead, I get this error message:
"Not Well Formed"
Is there any way to repair this file? It was checked in and saved normally. If it cannot be repaired, I will lose about 1 month's worth of work because my backup has failed. I would appreciate any guidance

Firefox has no built-in email features, if you are using Firefox to access your email it will be a web based email service and email features will be part of the email service. You will need to check with the support for the email service for how to do this.
If this questions is about Thunderbird, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

Error Message not in Oracle documentation

Similar Messages

Maybe you are looking for