Error Message: Number is not in external Interval (Testing Schedule)

Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AM

Hi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle

Similar Messages

Document number 5000000013 not within defined interval

Experts ,
When I am trying to create PO(ME21N),
System is showing the error
Document number 5000000011 not within defined interval
Message no. 06223
Diagnosis
The document number you entered does not lie within the interval defined for purchasing documents.
Procedure
Contact your system administrator if changes need to be made to the number range interval.
Help me to solve the issues
Regards

Hi Rahul,
Change your document type and try once again.for creating PO in ME21N you need to select standard PO (NB).
Check and revert back
Thanks
Ram

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

Error on Purchase Order - Document number 45* not within defined interval

Hi All,
PLEASE HELP ME or guide me in the right direction.
I am faced with a somewhat unique case in our enviroment. Some background first.
Back in 2000 when we upgraded from Walker to SAP, a number of Purchase orders had to be migrated, one of them is the order i am struggling with. Back then very little validations were built in, resulting in a Local Order being incorrectly created as a International Order but against a local currency.
Now this ordered is still being reflected as open in our system. When attempting to change the order by activating the 'Delivery Complete indicator", we get an error "use only foreign currency" This is due to the fact that validations against Document Type and Currency was created in 2003 and are in full operation now. It is hard coded thus i can not remove this easily.
Now when attempting to get around this by changing the Document Type to a Local Purchase order or trying to delete a line, we get the error below.
"Document number 45* not within defined interval"
Number ranges do come to mind based on the error description, however, Local Orders have a number range of 45, International Orders have a number range of 47. In this case, the order is created as a International Order BUT the number range is 45*, again, due to a lack of validations/incorrect config back in 2000
Do any of you know a possible solution to such a problem.
Regards,
Jody Ponnusami.

The validation of document type and currency is not standard, and if this validation cannot be deactivated, then you will have to resort to making changes in debug mode. Put a breakpoint at the relevant check and force it to accept the current combination.
The second option is to update EKPO table manually using SE16N. Set the delivery completed indicator to X.

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

I can receive messages but cannot sent. I get an error that number is not registered

I am unable to send messages. I can receive but not send. Each time I attempt to send I get an error stating number is not regisered

Then that means that the user that you are trying to reach has not setup and registered Messages on their iDevice. They have to set it up first before you can reach them. And you can only message with other iOS users, not with Android devices or other cell phones.

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

What does the Error Message: "File format not supported" mean?

When I first open an existing project, I get an Error Message: "File format not supported". After a few seconds all the windows open up and I can continue to edit. My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up? All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate, 1920 x 1080.

More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
Also, are your files on an external drive?

Serial Activation Error "Serial Number is not Valid for this Product"

I have Photshop CS5 Extended edition but when i try to activate the key it comes with the error "Serial Number is not valid for this product". The product has been activated two times before but the installation doesnt come with the error "Serial Number is already in use" or something similar. Any ideas on how to fix this?

Hi Dynamikzz,
As per the error message you received "Serial Number is not valid for this product", please follow the help document as below:
Error "The serial number is not valid for this product" | Creative Suite
In case you have received the error message "Serial Number is already in use", please follow the thread below as the activation count of Adobe CS5 applications is 2 :
Re: serial number issue
Regards,
Sheena

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Error message "itunes could not connect to the ipad because an invalid response was received from the device".

Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115

When I try to access iTunes Store I get an error message stating feature not available in the uk store

when I try to access iTunes Store I get an error message stating feature not available in the uk store

Exact same thing is happening to me. Couldn't find where to view the Itunes version number after a quick look. I hate the "simplified" interface by the way. On windows 8.1. Really starting to hate itunes, very buggy, and apple device locked down content (I'm looking at you TV shows and Movies) make it a pain to use.

Error messages in KO88-"Not set valuation type"

It shows many messages-
"Sender：ORD MZ000610376 RME1100SC28C6T-400-LF not set valuation type for the material 1002-00176" when executing KO88.
I do not understand what this message means.Did anyone have been encounter this message before?

Hi,
what is the 5-digit error message number for the mentioned message ? For example "KOxxx" ?
Best regards,
Andreas

HT1438 What does error message number 1 stand for?

Hey guys I got a new iphone 4 yesterday because my old one had a spring break so the power button wouldnt work. The new phone worked fine for most of the day but last nighht showed a message saying i needed to plug the phone into itunes again and restore it. I have now tried to restore the phone on two seperate computers and both times error message number 1 has shown up with a note saying that apple can not process my request. Im wondering what the number means so that I can fix it and restore my phone. as it is now its useless. Its just a black screen with a charger picture and an arrow telling me to connect it to itunes.

Hi. Can you post the exact error message? I can't seem to find any info for "error message number 1".
Also have you tried resetting this to factory defaults using the phone? Under Settings, there should be an option for you to restore it.

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

Error Message: Number is not in external Interval (Testing Schedule)

Similar Messages

Maybe you are looking for