ERROR Message Number required

hi,
i want to make Asset numb as mandatory for Capital PR ,if not entered system has to throw error
please let me know any standard error message available in the system

i want error message at the time of Finance release
not at intial level . if i set in OLME, it becomes mandatory during PR creation
Error should be only to Capital PR That during finanace release...........

Similar Messages

Error Message: Number is not in external Interval (Testing Schedule)

Hii ,
Iam working on Stability study process. I have maintained stabity test with materiial (QS) & performed my test upto Initial test of Inspection lot. But when i click create Testing Scheudle in the Notification (QM02) , system asks for testing schedule data for
Maintenane strategy, scheduling period.
On clciking create testing schedule , system throws error message "Number is not in external interval". I have maintained all the prerequite setting on number range in following spro path stability study>testing schedule for stability study> Category--> no range.
For Group ST 600000000- 6999999999 for Intenal & 70000000-7999999999 for external. But still iam facing with error message ""Number is not in external interval". It throws message no "IP324" . Even I had cross checked with maintenance setting, but error message remains . How to resolve this issue?
with regards,
K.Lokesh.
Edited by: Lokesh K on Mar 11, 2010 1:13 PM
Edited by: Lokesh K on Mar 12, 2010 5:55 AM

Hi Lokesh,
did you actually enter a number ( i.e. 70000001)?
Usually Stability studies are created using the external number range so that ringing names can be used for the studies:
Example:
Material: 000000000000000001 acetylsalicylic acid
Stability study: ASA1
I hope that this information proves usefull.
Regards
Isabelle

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization

I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404). I have re-installed 10x and still no luck. iTunes will not sync with my iPad. Can anyone hel

I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

HT204382 Jfiles, still getting error message that required codec is not available -- Help!

Just installed Telestream to open wmv files, but still getting error message that required codec is not available -- Help!

I'm still getting that same message how did you fix it? i installed the wmv player or Flip4Mac (i'm unsure if thats the same program), but even after i am still getting the pop up saying " The movie ____.avi" can't be opened. What am i doing wrong?

Error message: "Missing required plugins" - Illustrator CS3 will not load

I am running CS3 Web Prem on Vista, dual core Athlon with 2g Ram.
Illustrator has stopped working - gives error message: "Missing required plugins. Pathfinder Suite." Or it says "Missing required plugins. ArtConverters.aip PDFformat.aip Pathfinder suite.aip Rasterize.aip"
I have tried the suggestions from knowledge base article - I have tried deleting AIprefs; I have also tried in new user account - initially worked but not on opening program a second time. I have also re-installed Illustrator.
Any other solutions?

Glad to hear it.
Not sure what possible nuances to performance or memory management there may be to running in compatibility mode. Since I can't run in any other mode, it is hard to make a comparison.
It seems to run fine though, for me.
There should be a Windows Update that came out in the last day or so that is supposed to address this issue (http://support.microsoft.com/kb/947562). At least thats what it says.
BUT, after that fiasco with SP1, I am real reluctant to do any more updates.
SP1 toasted my ability to connect with network resources, external and some internal hard drives, ALL my USB equipment failed to connect anymore. I removed SP1 (uninstalled it per the instructions on the MS KB) but that process trashed the OS and required a complete clean re-install of Vista. A week later I am pretty much back to where I should be (see, my system backups were with SP1. Brilliant, eh?).
Still have to run many so-called "Vista Compatible" applications in this compatability mode though.

Windows Installation error message a required ressource can not be located: ms visual c 2005

no idea what to do. please help me!

Am 04.11.2014 21:48, schrieb Jeff A Wright:
>
windows Installation error message a required ressource can not
be located: ms visual c 2005
created by Jeff A Wright
<https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
Download & Install/ - View the full discussion
<https://forums.adobe.com/message/6899407#6899407>

Run program error, Message Number: "" BPC NW7.5

Hi Gurus,
Has anyone faced the following error for Currency Conversion in BPC?
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %CATEGORY_SET%
TID_RA = %TIME_SET%
CURRENCY = %RPTCURRENCY_SET%
OTHER = [ENTITY=%P_CC_SET%]
RATEENTITY = R_GLOBAL
*ENDRUN_PROGRAM
P_CC - Planning Entity
R_GLOBAL is a member in Rate entity.
Error as follows:
RUN_LOGIC:Run program error, Message Number: ""
Failed
EXCEPTION OCCURRED WHEN RUNNING PROGRAMS:
Error found in BPC
I have maintained all the property as per SAP document, wondering why this error appears
Thanks & Regards,
Ramanathan
Edited by: Ramanathan_S04 on Sep 14, 2011 3:47 PM

Hi Ramanathan,
I am also facing the same problem.
Were you able to fix this issue?if so how?.
Your help will be greatly apprciated.
Regards
Arun

Purchased Photoshop Elements 13, downloaded, entered serial numbers, then got the error message: OS Requirement not met, Windows Vista not supported.

Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?

Sweetie Bug wrote:
now what?
System requirements | Adobe Photoshop Elements
The last version of PSE which supported Vista was version 12.
You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund.

HT1386 my ipad wont synch to my i tunes it shows error messages the required disk can not be found and the apps found on the ipad can not be determined

My I pad wont synch to my Aplle or I tunes it shows the error message the required disk can not be found and the apps installed on the ipad could not be determined

Quit iTunes, reboot your computer, restart the iPad and then try again. Use another USB port on your computer as well.

HT1438 What does error message number 1 stand for?

Hey guys I got a new iphone 4 yesterday because my old one had a spring break so the power button wouldnt work. The new phone worked fine for most of the day but last nighht showed a message saying i needed to plug the phone into itunes again and restore it. I have now tried to restore the phone on two seperate computers and both times error message number 1 has shown up with a note saying that apple can not process my request. Im wondering what the number means so that I can fix it and restore my phone. as it is now its useless. Its just a black screen with a charger picture and an arrow telling me to connect it to itunes.

Hi. Can you post the exact error message? I can't seem to find any info for "error message number 1".
Also have you tried resetting this to factory defaults using the phone? Under Settings, there should be an option for you to restore it.

Error in IDOC creation of Inbound Delivery (VL31N) with Error Message Number VL561

H,
I'm getting an error message when generating a test IDOC of Message type DESADV and IDOC type DELVRY03 to create Inbound delivery with reference to a standard purchase order.
Essential transfer parameters are missing in record: PO Number and Item
Could you one help me out in solving this.
Thanks,
Raj

Hi ,
Goto SM13 .
Find the terminations based on user and creation date.
Get the same analysed by ur ABAP team.
Also check the confirmations in PO at Item level.
Regards
Ramesh Ch

Get the Error-Message-Number from RFC to SOAP

Hi All,
we have implemented a synchronous SOAP-Call to RFC over XI. How can I get the message-number from the raised exception in the RFC-function Module to the SOAP-Caller?
Thanks a lot
Matthias

Matthias,
For you to have an exception structure when an rfc is imported into Xi, the rfc should have an exception defined. Usually we define an ApplicationError as one of the exceptions.
The idea is that if there was an exception which you didnt handle in your rfc (BAPI return will be emplty), the exception will be returned to XI and shown in SXMB_Moni as hard error(of course there should be a message mapping avaliable in XI )
In all the other cases, since you are populating BAPIReturn which is tables parameter, you should be able see the filled structure in your response message from RFC.
Regards,
naveen

ERROR Message Number required

Similar Messages

Maybe you are looking for