Error Message occured in creating a new contract account

When we were trying to create a contract account for a business partner, we were stuck at this point with an error message stating u201CAccount holder relationship is not uniquely definedu201D.
If anybody could tell us how to overcome this erroru2026 we would be pleased to proceed
With Regards

You won't be able to delete the existing account in order to set up a new one without the password for the old account. If your father doesn't remember the password, he can reset it as explained here: iCloud: Change your iCloud password.

Similar Messages

Audio cd burn from 11.1 not playing on old version of iTunes on another MAC. error message was cd created on newer version of iTunes. If the disk was a audio cd it should not matter the iTunes version.

The error message was cd created on newer version of iTunes. If the disk was a audio cd it should not matter the iTunes version. I converted all songs on playlist to MP3 and then selected burn playlist and checked audio cd. This worked in itunes 11.0.5. Also itunes 11.1 will not accept the second disk on a cd audio burn. It just keeps telling me to insert a blank disk, no matter how many blank disks are inserted

I think that the operating system is 10.4.11 and iTunes isn't responding to this operating system. I cannot upgrade the operating system to a version any later than what it is as I think it would then go to Tiger.
10.4 is Tiger, and 10.4.11 supports the latest version of iTunes and QuickTime. So either the system isn't at 10.4.11 - your original post said 10.4.1 - or there's something wrong with the system in which case earlier versions of iTunes/QuickTime might well also fail to install.
Please confirm the version of Mac OS X that really is on the system and we'll go from there.

New contract account for every line item in subscription order....

Hi Guys,
I am having a problem with the subscription order.
Whenever I change the subscription order and add a line item to it, SAP by default creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
Can you suggest me any solution for this problem?
Thanks in advance...
Regards,
Abhay

Hello Abhay,
This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
We had a similar requirement and an enhancement was developed per specifications.
Regards,

HT201514 I keep getting this message "Unable to complete back up an error has occurred while creating back up folder" Why is this happening and is it time to purchase a new tim machine?

I keep getting this message “Unable to complete back up an error has occurred while creating back up folder” Why is this happening and is it time to purchase a new tim machine?

Check out the Apple Support Communities Time Machine expert Pondini's troubleshooting article on this exact topic. Hopefully, it will help.

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Error occurs when creating a new destination in HCI OData Provision Administration

Hi,
An error occurs when creating a new destination in HCI OData Provision Administration.
Please see the screen shot in attachment.
Any help will be appreciated!
Thanks,
Li-hua

It's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
(still looking for the GWaaS colleagues to fix the original issue.)

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
Thanks

Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs with I try to attach a PDF to emails. Any thoughts? Apple was unable to help.

Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when trying to attach a PDF to emails. Apple was not able to fix. Any thoughts?

The message says:
Please wait
If this message is not eventually replaced by the proper contents of your document, your PDF viewer may not be able to display this type of document.
Then it goes on to suggest an Reader upgrade, which I already did.

Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment

hello ,,
i have this problem many times why i don't know and i dont have jealbreak " Cydia " ok
the messageis is :
Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment"
how to solve this problem any helpful answer please ?
thank you

The ultimate solution after you have tried restarting/ rebooting your device (no need to hard reset or restore your device) is:
Click iForgot, then reset your password, change it to your new password. Then go to Store, try downloading any app! Hope this will help because some of my friends had this prob before and all what i did was this way!

Error 7 occurred at Create Folder in Create Directory Recursive.vi-

Recieved following message when attemoting to create source distribution
Error 7 occurred at Create Folder in Create Directory Recursive.vi->ABAPI Dist Create Directory Recursive.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->SDBEP_Invoke_Build_Engine.vi->SDBUIP_Build_Invoke.vi->SDBUIP_Build_Rule_Editor.vi->SDBUIP_Item_OnDoProperties.vi->SDBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.

Hello,
Could you please list which options you are selecting when building a
source distribution (I am assuming you are using LabVIEW 8.0?).
Do you get this error when clicking on "Generate Preview" button when configuring source distribution properties?
Under "Distribution Settings" category, could you try checking the
"Disconnect type definitions and remove unuses polymorphic VI
instances" option and see if that helps with the build process?
Also I suggest Mass Compiling your VIs (Tools -> Advanced -> Mass Compile) before creating a source distribution.
If these do not help, could you attach your project with all the VIs it contains here?
Thank you and best regards,
Shakhina P.
Applications Engineer
National Instruments

Error while trying to create a new company

Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil Doshi

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

Error 10 occurred When createing an executable with application Builder?

Problem: I am using the LabVIEW Application Builder to create an executable from my VI. When I run the Application Builder, I receive the following error:
Error 10 occurred at Copy in Win Install Copy Redistribution Files.vi->Win Install Create.vi->Dist Call Create Installer.vi->Builder Application.vi
Possible Reason(s)
Labview : Duplicate Path
or
NI-488 : New I/O attempted with old I/O in progress
Why do i receive this error and how can i resolv this issue?

Jiang,
It sounds like this could be an overwrite issue. From the file path you specified, I can tell you that the error is occurring in creating the installer for your executable. Are you specifying an installer directory where you have already created an installer of the same name? If so, is that directory read only? Make sure that write privileges are enabled for you installer directory, and if that doesn't fix anything, try specifying a different installer directory.
If none of these suggestions take care of the problem, please post a simple example that illustrates the problem (i.e. a simple VI and a copy of the build file). We can then try to replicate the problem and troubleshoot it. What version of LabVIEW are you using?
Regards,
E. Sulzer
Applications Engineer
National Instruments

Keychain error -25299 occurred while creating a System Keychain entry for t

Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
I keep getting the error above every time I try to set up my time capsule
Could use some help?
Mahalo

Same here.

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

Error Message occured in creating a new contract account

Similar Messages

Maybe you are looking for