Error message of MAC flapping for CCM-UC installed in UCS server
Dear All,
I have a strange issue, I have the 2 UCS servers setup with CCM & unity Connection running on each server on PUB - SUB mode.
I'm getting following error message on the Switch where the UCS server Connects.
I'm unable to trace why we are getting this error message, There is no problem with accessing CCM or UC, also the Phone & Voice mail seem to working.
un 25 13:15:14.853: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Jun 25 13:15:28.828: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Jun 25 13:15:44.145: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Has anybody expereinced such error before, Appreciate your help in tracing this error.
Thanks,
Oliver
Hello,
I believe you'll get better answer at:
"https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=14&container=2003&spotlight=true&q=UCS"
my best guess is to check the LAN config on the UCS. It seems its trying to load balance the traffic in Active-Active rather than Active-Standby.
HTH
Similar Messages
-
what do I do when I get this error message?
NO, I still have the error message/problem. It started with my hotmail account. So I deleted/removed it and started a new yahoo email. I am now getting the error message on yahoo email. It doesnt hapen on my gmail account nor my exchange UCSD email and this is only on my MAC...my ipad works fine. All emails run fine on the ipad. Its so frustrating.
-
My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while
Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.
-
When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software. -
I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?
Uninstall and run the Cleaner Tool
Uninstall Creative Suite 4 and point products (Mac OS X)
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Error message the update" java for Mac OS X10.5 Update 4" can't be installe
today i tried to installed the new update. I getting the error message the update" java for Mac OS X10.5 Update 4" can't be installed. Is anyone else getting this error? What do I do to get it installed?
AustinSame here, can't install it on my Mac Pro with 10.5.7:
16.06.09 09:04:10 Software Update[2553] reading from /var/folders/33/33rOYQ3fFnmQjRkC-FShb++TI/Cleanup At Startup/com.apple.SoftwareUpdate.HvePu4/Java für Mac OS X 10.5 Update 4: Is a directory
16.06.09 09:04:10 Software Update[2553] reading from /var/folders/33/33rOYQ3fFnmQjRkC-FShb++TI/Cleanup At Startup/com.apple.SoftwareUpdate.HvePu4/Java für Mac OS X 10.5 Update 4/Java für Mac OS X 10.5 Update 4.dist: Operation not permitted
16.06.09 09:04:10 Software Update[2553] reading from /var/folders/33/33rOYQ3fFnmQjRkC-FShb++TI/Cleanup At Startup/com.apple.SoftwareUpdate.HvePu4/Java für Mac OS X 10.5 Update 4/Packages: Is a directory
16.06.09 09:04:10 Software Update[2553] reading from /var/folders/33/33rOYQ3fFnmQjRkC-FShb++TI/Cleanup At Startup/com.apple.SoftwareUpdate.HvePu4/Java für Mac OS X 10.5 Update 4/Packages: Is a directory
Apple, please fix -
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
So, my question is -- WHAT IS GOING ON?!!Hi
See if this might help
Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
Error message on print window for Vista--"out of paper"--I just loaded paper...?
error message on print window for Vista--"out of paper"--I just loaded paper...?
What can I do to get it to print?hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type
In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin -
When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!
Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks! -
i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works.
Maybe you are looking for
-
Application Alias not working with Global Single Sig on
I have a intranet applications, with login against https://login.oracle.com that is working fine. However, when I try to use the Application Alias, defined on Applications Attributes, it's not working, redirecting to an invalid page: https://htmldb.o
-
How To Access My Purchased History On iTunes 12 Windows
Hello, I just want to know how I can access the purchased section from iTunes 12 on Windows 8.1 PC. I just updated to iTunes 12 because every time when I plug-in my iOS devices running iOS 8.1, it would always prompt me for update. I noticed that App
-
First of all, I do apologize but I can't find a JCA topic, so I'm positng my question here In my application I want to use XA transaction across the resource adapter. I read an article on the Sun forum (Connector-interest archives section) about an a
-
Cannot embed MOV file in Acrobat
I hope this is the right forum for my question - it's the closest one I could find... My problem is that I get an error message when I try to embad a MOV file into a PDF using Acrobat 9. This has worked in the past. Now suddenly I'm being told the an
-
How to move data files out of Users folder that is in a small partition?
The small partition (50 GB) also has the System, Applications, Developer and Library folders. I would like to move my Documents, Pictures, etc folders from this small partition to the 200 GB partition, preferably without losing too much performance.