Error message of system update with Vantage Tool

"An error was detected with the package catalog for your system on the System Update Server. Please contact the Support Center."
This is what I get when upadte the system using Vantage Tool.
My Update System version is 4.03.0012 which is the latest.
W530CTO-2436 K2000M i73610QM 4Gram
Solved!
Go to Solution.

Hi u2b1394,
According to parkerjnc, this error is typically seen right after the TVSU catalogs have been updated and the Akamai Edge servers are still holding cached content. I would try your update again in a day or so and if you still get the problem, try reinstalling your ThinkVantage System Update from here:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012808
Let me know if this helps.
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Similar Messages

Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified

Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified.I
I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone. Anyone facing the same issue or can point me in the right direction?

You may get better information on that error message by reposting in the iPhone forums:
iPhone
It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than just "G4" will get you help faster.

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I am trying to update to 11.1 on a Windows XP system and I keep getting an error message saying the update can't locate the itunes.msi file...where is that located?

I am trying to update my Itunes software on a Windows XP system and keep getting an error message saying the update can't locate "itunes.msi" where is that file located?
thanks, Judy

The servers are getting slammed by millions of people wanting to upgrade.. just give it some time, and soon enough you'll have your upgrade.

Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be.

Error message trying to update CS6: please close dynamiclinkmanager.exe, what is this?

Error message trying to update CS6: please close dynamiclinkmanager.exe, what is this? Thanks

Refer to this:
Working with your Operating System’s Tools
Mylenium

I keep getting an error message re: System Extensions

Almost every time that I run Software Update or when Norton runs its automatically scheduled scan, I keep getting an error message saying, "System extension cannot be used. The system extension "/System/Library/Extensions/IomegaSAM.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update." I've also been having problems with Safari, in that when I've had a browser window open for a while and use it to go to different websites, etc., after I've gone to 2 or 3 websites it will then act like it's "stuck" and it won't do anything else until I close the window, quit out of Safari, and start it up again. Then it will be fine and work for a while, until it does the same thing...again.
Are these items somehow related, and how do I fix this?

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

I received this error message: The system extension "/System/Library?Extensions/ACard6280ATA.kext" was installed improperly and cannot be used. Please try reinstalling ... . What is this about? What is ACard6280ATA.kext?

I received this error message: The system extension "/System/Library/Extensions/ACard6280ATA.kext" was installed improperly and cannot be used. Please try reinstalling ... . What is this about? What is ACard6280ATA.kext?

I'm still with you, just having a hard time wrapping my mind around the fact that you reinstalled OS X, which is like shooting a mosquito with a cruise missile, yet the problem remains.
Here is the KB article for your review: Reinstalling Mac OS X
Admittedly there is not much to it, but it should have eradicated the problem.
I would guess that the 17 "hp_" messages have something to do with Hewlett-Packard and in fact I do use an HP printer with the computer. I uninstalled the printer software and reinstalled it. The printer seems to work fine, but the kernel extension error messages still keep appearing. I'm inclined just to delete these 17 kernel extensions and then, if the printer doesn't work correctly, unintall and reinstall the printer software again. Sound sensible?
It certainly does. The only thing I can think of is that the OS reinstallation did not recognize those kernel extensions and left them untouched, AND the HP uninstaller did not remove them, AND the HP installer did not perform correctly. Having suffered through several HP botched software attempts I tend to believe that remains a posssibility.
If you are so inclined, I would remove the troublesome .kext files as you say, then reboot. Be prepared for the printer to stop working, but once you remove them try the printer again anyway. The vast majority of printers do not require any specific downloads since their drivers are already built into OS X.
As a last resort try reinstalling OS X again (I know...) and run Software Update to bring everything up to date. Apple released some new printer drivers a few weeks ago.
Finally, if this doesn't work post the same question as a new topic since I am out of ideas. A new topic will get more attention than unresolved questions with responses.

Error message "Your system is low on memory"

I just installed Dreamweaver 8.0.2 and I occasionly the error
message "Your system is low on memory" appears. I only use
Dreamweaver for editing php and simple htm files. I have 2 gig of
RAM and Windows Task Manager says I have 1 gig free. This question
has been asked twice before in this forum over the past 2 years and
there has been no work around given. I have XP service pack 2 and
it has automatic updates turned on. Any suggestions?

On Tue, 26 Sep 2006 19:13:33 +0000 (UTC), "Richard9908"
<[email protected]> wrote:
>Thanks for the two quick replys!
>
> David, I just disabled the Dreamweaver start-up screen
and restarted
>Dreamweaver so hopefully the error message will not pop
up again. It seems to
>pop up every one or two days. I'll let you know what
happens.
>
> Kat, I looked under the Processes tab of the Windows
Task Manager but I
>didn't do this until I restarted Dreamweaver so I'll
probably have to wait
>until the error message is displayed again (hopefully it
won't). My question
>is since I still have 1 gig out of 2 gig RAM free does it
really matter who is
>using the 1 gig?
>
> Thanks! Rich
Windows used to not do well with a lot of RAM, but I haven't
looked
into that for a couple of years.

MG3250 Printer throws up error message - Scangear cannot communicate with scanner for these reasons

Hi
I have an MG 3250 printer running off an HP Pavilion Laptop using Windows 8.1. Every time I try to scan I get an error message that 'cannot communicate with scanner for these reasons...........etc'. The only way I can get the printer / scanner to work is by going through the Control Panel / Hardware & Printers route. This seems terribly slow and time consuming. What is wrong and what needs to be done to correct the problem?
Thanks

I have the exact same problem as you with my new Canon LiDE 120. The errors I get are: 2, 156, 182, 55 and sometimes 77 when using it on my Windows 8.1 (64 Bit) desktop PC. I have tried installing and uninstalling the drivers multiple times, used different ports and still nothing. It does however work properly on a Windows 7 device.
My PC's specification is as follows:
Windows 8.1 (64 Bit) - With latest updates
Avast Premier
Malwarebytes
ASUS z87 Pro
Intel 4770k
ASUS GTX 670 (4GB)
8GB 1600MHz Kingston RAM
Things I have done
Tried different ports (USB 2.0 and 3.0)
Installed all software & driver from CD
Installed all software & driver from Canon Website
Installed only the latest driver from Canon Website (April 2015)
Tried to use Windows Fax & Scan, Scan, IJ Scan Utility, Scangear and Vuescan.
What happens
The physical buttons on the device are unresponsive
The computer says it is warming up, but nothing happens
It starts to scan for a few seconds and then comes to an abrupt end - this can happen at 10% of the scan or even at 91%.
Surely the problem cannot be with Windows 8.1 since the device was only released last year. What could be the issue? I called their support line and was advised to clear the drivers of previous scanners used by my system, I did this and there still is no change. Could somebody please help me!

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

Modify Application: Error Message:: Object Variable or With Block variable

Hi Experts,
We just installed 5.1 on our server and once the application is installed.
When I try to modify the aplication I get this error at the end
This is step what the modify app does:
Check environment information
Drop Fact table index.
Modify fact table.
Update application information.
Set Fact table index.
Create stored procedures and comment table.
Increase application version and make legal consolidation table.
Make OLAP database and Journal/Audit reports. / Validate dimension formulas.
Error Message:: Object Variable or With Block variable
Any one has any any answer ? I will appreciate your help on this.
Thanks

Please check if Reporting Services is working properly.
Just open IE and type http://nameofserver/reports
If you receive any error then you have to fix that error verifying configuration of RS.
If RS is working make sure you add the right information into Server Manager Server Option for RS and Report Server virtual directory.
Also please check the tblappsetinfo to have all the fields completed (regarding servers).
Regards
Sorin Radulescu

Error message "unable to connect with server. Check wifi connection"

I started having the error message "unable to connect with server. Check wifi connection" when I attempt to use search function within a certain apps and when I try to download certain magazine (eg. National geographic). I didn't have this problem with I first started using iPad, and no problems with connectivity when using other apps. Can anyone help?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Error Message "the system cannot find the specified file"

Hi,
I built my website with iWeb, but when I want to publish it on my own domain (not .mac) I've always this error message (the system cannot find the specified file) with many files. I've tryed many ftp host but I still have the same problem. I ask my host domain manager and everything is ok with them. Si I guess that the problem comes from iWeb.
Please help me.
Thanks

I get the error: Cannot Copy 08 the curse in on my house: Cannot find the specified file. Make sure you specify the correct path and file name.
The song "the curse in on..." is on the "into the woods" soundtrack. I deleted the entire soundtrack from my iTunes Library, shut down and tried again. Same error. I did a search of all three hd (2 external and c) nothing found. I searched for song name and "into the woods" I even searched for the artist "Nicholas Parson Company" nothing on any of the 3 HDs. I also went into explorer and manually searched for the song under soundtracks, misc, various and I could not find it. I consolidated my library and restarted. I tried again and same error message. Can a level 4 or 5 offer any help. I am at a loss...
The error won't let me copy one library to another HD.

Error message of system update with Vantage Tool

Similar Messages

Maybe you are looking for