Error Message on 4404 Controller

I had a client drop off one of the AP's and this is the error that i see in the logs:
Jun 02 08:17:13.735 apf_80211.c:3942 APF-1-SEND_ASSOC_RESP_FAILED: Could not send a Client Association response to 00:15:70:af:c3:62. Supected Auto-Immune attack Not sending Assoc Response.
What does it mean?

The WLC's Intrusion Detecsion System is suspecting the client (MAC Address 00:15:70:af:c3:62) could be attacking your Wireless LAN.
Locate and eliminate the threat. :) He he he ...

Similar Messages

  • I have no sound on dv8000. Moved to Windows 7 64 bit. (error messaged;No media controller's)

    I have no sound on dv8000. Moved to Windows 7 64 bit. Windows XP was on very shaky ground (error messaged-No multi media controller's). Also, need mass storage controller driver. Where can I obtain the compatible drivers. It would be nice if HP did not abandon some of their products as they did this one. Finally, can I add 2gigs DDR 333 (pc2700 2.5 cas) instead of the 512 megs I have now. I will be grateful for any help.~~~~Cuba T    

    Don't blame HP....Conexant didn't develop 64 bit drivers for their audio chip.
    If you want to run W7 on that model, it will have to be 32 bit.  Then you use the Vista 32 bit audio driver--probably have to manually install it too.
    After you make the switch, install this card reader driver for the mass storage controller.
    It will also work on W7 64 bit but without any audio, I don't see the point.
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&sp...

  • MARS GC, misleading error message

    Adding of local controller failed with this error message:
    The local controller you intended to add is , hence cannot be added based on license key permissions.
    The real problem is that GC is not reaching LC's because ACL on the path between.
    Would be nice to have that kind of message (for example: LC not responding/reachable)!

    The error message will occur only if the line card is faulty. Replacing line card will resolve this issue.

  • WLC 4404 error message

    Dears,
         we have a wireless lan controller 4404 with LDAP authentication ...
    first, we are getting this error message on the WLC:
    apfMsConnTask_0: Jul 02 13:27:34.180: %APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:291 Could not check supported rates. Missing Supported Rate. Length :0. Mobile MAC: 78:e4:00:07:dd:10.
    second, our issue is when you open a browser, and after you enter the credentials for the username and password, it keeps redirecting to the virtual IP server "1.1.1.1" and never responds with the requested page or the "authentication succeeded" popup. however, when you open a new tab on the same browser, it connects you to the internet...
    please advise any recommended procedures or solutions that can be done to solve this issue.
    thanks in advance ...
    regards,
    Majed

    hi Scott,
    thanks for the reply...
    that means its ok that the client keeps redirecting on the VIP set on the WLC, if its the function of the vip as you have said ?
    and regarding the error message, it is the same client that is connecting to the webauth !!
    please provide me with any ideas to solve this issue if anything came up to your mind
    may updating the browser or using another solve this, and will upgrading the WLC to newer version lead us to not seeing this message and get rid of this issue ??
    regards,
    majed

  • Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

    Hi,
    I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
    -cRIO-9113 4 slot chassis
    In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
    -cRIO-9022 Real-Time Controller
    -NI 9144 8 slot expansion chassis
    In this chassis I have installed:
    -Slot 1: NI 9213 (16ch thermocouple inputs module)
    -Slot 2: NI 9201 (8ch ±10 V analog input module)
    -Slot 3: NI 9263 (4ch ±10 V analog output module)
    -Slot 4: NI 9426 (32ch sourcing digital input module)
    -Slot 5: NI 9426 (32ch sinking digital input module)
    -Slot 6: NI 9476 (32ch sourcing digital output module)
    In the controller I have installed the following softwares:
     -IndCom for EtherCAT Scan Engine Support 1.2.0
    -LabVIEW NI SoftMotion Module 9.0.0
    -LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
    -LabVIEW Real-Time 9.0.1
    -LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
    -Web Server for LabVIEW RT 2.0.0
    -Language Support for LabVIEW RT 1.0.0.3
    -NI Scan Engine 1.1.0
    -NI Scan Engine Advance I/O Access 1.1
    -NI-Motion 8.0.0
    -NI-RIO 3.4.0
    -NI-RIO IO Scan 1.4
    -NI-VISA 4.6
    -NI-VISA Server 4.6
    Well, I made  VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
    Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
    Ferdinand Martinez
    FMO Automation LLC

    Hi nausfaratu,
    Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
    Aaron P
    National Instruments
    Applications Engineer
    http://www.ni.com/support 

  • I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)

    I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)
    I can ping through to the WLC and the AP.

    Thanks a lot Loe for the Feedback. The issue was not my configuration but rather the type of Wireless LAN controller I have, the WLC does not support my  AP's. I have a Cisco 520 series WLC and got to know they only work with the 500 series AP's. my AP's are 1130 series meaning i have to get another controller or change the APs.
    thanks once again..

  • When I try to run applications on my domain controller, I get error message, "The service cannot access control messages at this time."

    My domain controller is Windows Services 2008 R2.  I get this error message  when trying to open Active Directory, Group Policy, services, etc.  We had this problem previously.  Rebooted the server and it worked for awhile, but the problem
    has reoccurred.

    I would agree with others. Installing recent updates might solve the issue. Also, checking the errors in event viewer might help. 
    Have you tried to reboot the server? If no, you can start with that.
    If none of the propositions helped, you can consider doing the following if you have at least one additional DC/DNS/GC server:
    Run netdom query fsmo to identify the FSMO roles that the faulty DC is holding
    Transfer FSMO roles that the faulty DC is holding to another healthy DC
    Demote the faulty DC (If you are unable to do it, you can consider running
    dcpromo /forceremoval and running a metadata cleanup)
    Re-install the OS of the faulty DC and install the recent updates
    Promote the re-installed server as a DC/DNS/GC server
    Of course, you need to consider taking system state backups before proceeding.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Error message 4400 controller

    I get in our logs "Received LWAPP packet with invalid sequence number". Does some one know what this means?

    you can find it from:
    http://www.cisco.com/en/US/docs/wireless/controller/message/guide/msgs6.html
    Error Message %LWAPP-3-RX_ERR3: Received LWAPP packet with invalid sequence number
    (got [dec]expected [dec]) - from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
    Explanation LWAPP packet sequence mismatch has occurred, LWAPP packet was dropped. AP may not function as expected.
    Recommended Action No action is required.

  • WiSM error message : Message: CPU Receive Multicast Queue is full on Controller

    Hi,
    I heve several WiSM modules, the version is 7.0.220.0. Each of WiSM receive the following error message : CPU Receive Multicast Queue is full on Controller. I searched the bug toolkit, some old version of WLC hit this bug, but not affect our version.. Please help to mention me how to debug this error.
    Best Regards,

    Multicast Queue Depth
    The multicast queue depth is 512 packets on all controller platforms. However, the following message might appear on 2106 controllers: “Rx Multicast Queue is full on Controller.” This message does not appear on 4400 series controllers because the 4400 NPU filters ARP packets while all forwarding (multicast or otherwise) and multicast replication are done in the software on the 2106.
    This message appears when too many multicast messages are sent to the CPU. In controller software releases prior to 5.1, multicast, CDP, and ARP packets share the same queue. However, in software releases 5.1 and later, these packets are separated into different queues. There are currently no controller commands that can be entered to determine if the multicast receive queue is full. When the queue is full, some packets are randomly discarded.
    Do you have a lot of clients using multicast ?
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

  • Dynamic mandatory field error message is not getting displayed in webui

    Hi,
    In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
    Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
    I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
    Can anybody tell where the problem is?
    Thanks,
    Hari.

    Hi Hari,
    Really sorry do not know how to convert this nug file to text
    How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
    Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
    Thanks,
    Rajesh P

  • Error message with a hyperlink attached to it

    Hi Friends
    I have a requirement wherein I need to display a hyperlink along with the error message in webui.
    Example...
    Please enter a valid currency Details
    Here Details should appear as a Hyperlink and on clicking on this hyperlink it should navigate to a portal screen.
    Infact it is not actually a portal screen, it can be any URL.
    Could you please let me know how to add the hyperlink and how to navigate to portal screen on clicking on this hyperlink
    where do we need to write the code.
    Best Regards
    Anil
    Edited by: ANILKUMAR M on Mar 3, 2011 7:23 AM

    Hi Anil.
    According to SAP Help you can always get a link in a message for:
    . Fields that are defined as mandatory in the UI Configuration Tool
    . Fields that are defined as mandatory in the business object layer (BOL)
    Also it's possible with additional coding. The example is:
    lr_msg_service = view_manager->get_message_service( ).
    lr_msg_service->add_message_mapping( iv_message_class = 'CRM_BRC_MESSAGES'
    iv_message_number = '013'
    iv_binding_string = '//BRCBUSINESSROLE/STRUCT.CRMUI_NAVBAR'
    iv_page_id = component_id ).
    Check this [link|http://help.sap.com/saphelp_crm700_ehp01/helpdata/EN/cb/659ebfc880493baad66896518a55a1/content.htm] for details. Look at "Navigation to Field That Issued a Message" section and related link for "Enabling Links in Messages".
    Another option, which mentioned Arun and according [to this book|http://www.sap-press.com/products/SAP-CRM-Web-Client-Customizing-and-Development.html], is the global message service. The global message service enables you to register callback methods so that you can output navigable messages, that is, you can initiate a navigation to another view (or do whatever you want ) by clicking the message. Registration of the message service for a message looks like:
    DATA: lr_service TYPE REF TO cl_bsp_wd_message_service.
    lr_service = me->view_manager->get_message_service( ).
    TRY.
      lr_service->subscribe_message(
                      iv_message_class = 'CRM_IC_PPL_UI_BDC'
                      iv_message_number = '114'
                      iv_subscriber = me
                      iv_activation = abap_true ).
      CATCH cx_bsp_wd_dupl_mess_subscr.
    ENDTRY.
    where is the ME self reference points to a view controller that implements the IF_BSP_WD_MESSAGE_HANDLER interface, including HANDLE_MESSAGE method.

  • IPod Restore - Error Message 21

    Hi All,
    Hope someone can help as this is driving me insane - I've just installed iTunes 9.2.1 but when I went to Sync my iPod I was told I needed to restore it.
    Sooo....selected Restore but just as it gets to the end of the Restore process I get an error message (21). Having reviewed the info on this website I've tried everything from switching off Windows Firewall to uninstalling my security software.
    When I run Diagnostics, this is what I get - PLEASE can anyone help?!?!
    +Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)+
    +TOSHIBA Satellite L350D+
    +iTunes 9.2.1.5+
    +QuickTime 7.6.6+
    +FairPlay 1.8.20+
    +Apple Application Support 1.3.1+
    +iPod Updater Library 9.2d4+
    +CD Driver 2.2.0.1+
    +CD Driver DLL 2.1.1.1+
    +Apple Mobile Device 3.1.0.62+
    +Apple Mobile Device Driver 1.49.0.0+
    +Bonjour 2.0.2.0 (214.3)+
    +iTunes Serial Number 77D7ABF151E33DA6+
    +Current user is not an administrator.+
    +The current local date and time is 2010-08-06 15:41:25.+
    +iTunes is not running in safe mode.+
    +WebKit accelerated compositing is enabled.+
    +HDCP is not supported.+
    +Video Display Information+
    +ATI Technologies Inc., ATI Radeon X1250+
    +** External Plug-ins Information **+
    +No external plug-ins installed.+
    +Genius ID: 77997418ba0ddcad18ddf23a6a6fd31a+
    +** Network Connectivity Tests **+
    +Network Adapter Information+
    +Adapter Name: {AF6E733D-F225-4E62-85E6-73B8C8D1BCFB}+
    +Description: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter+
    +IP Address: 192.168.1.2+
    +Subnet Mask: 255.255.255.0+
    +Default Gateway: 192.168.1.1+
    +DHCP Enabled: Yes+
    +DHCP Server: 192.168.1.1+
    +Lease Obtained: Fri Aug 06 15:15:09 2010+
    +Lease Expires: Sat Aug 07 14:21:21 2010+
    +DNS Servers: 192.168.1.1+
    + 192.168.1.1+
    +Adapter Name: {50701037-1545-4784-9A8B-106F52CA6AA1}+
    +Description: Realtek RTL8102E Family PCI-E Fast Ethernet NIC (NDIS 6.0)+
    +IP Address: 0.0.0.0+
    +Subnet Mask: 0.0.0.0+
    +Default Gateway: 0.0.0.0+
    +DHCP Enabled: Yes+
    +DHCP Server: +
    +Lease Obtained: Thu Jan 01 00:00:00 1970+
    +Lease Expires: Thu Jan 01 00:00:00 1970+
    +DNS Servers: +
    +Active Connection: LAN Connection+
    +Connected: Yes+
    +Online: Yes+
    +Using Modem: No+
    +Using LAN: Yes+
    +Using Proxy: No+
    +SSL 3.0 Support: Enabled+
    +TLS 1.0 Support: Disabled+
    +Firewall Information+
    +Windows Firewall is off.+
    +Connection attempt to Apple website was successful.+
    +Connection attempt to iTunes Store was successful.+
    +Secure connection attempt to iTunes Store was successful.+
    +Secure connection attempt to iPhone activation server was successful.+
    +Last successful store access was 2010-08-06 15:35:33.+
    +** CD/DVD Drive Tests **+
    +LowerFilters: PxHelp20 (2.0.0.0),+
    +UpperFilters: GEARAspiWDM (2.2.0.1),+
    +F: HL-DT-ST DVDRAM GSA-T40N, Rev JT03+
    +Audio CD in drive.+
    +Found 12 songs on CD, playing time 51:04 on Audio CD.+
    +Track 1, start time 00:02:00+
    +Track 2, start time 05:09:35+
    +Track 3, start time 09:08:59+
    +Track 4, start time 12:39:49+
    +Track 5, start time 16:55:37+
    +Track 6, start time 20:48:59+
    +Track 7, start time 24:22:19+
    +Track 8, start time 27:32:51+
    +Track 9, start time 30:57:16+
    +Track 10, start time 34:25:00+
    +Track 11, start time 38:38:11+
    +Track 12, start time 43:06:08+
    +Audio CD reading succeeded.+
    +Get drive speed succeeded.+
    +The drive CDR speeds are: 4 10 16 24.+
    +The drive CDRW speeds are: 4.+
    +The drive DVDR speeds are: 4.+
    +The drive DVDRW speeds are: 4.+
    +** Device Connectivity Tests **+
    +iPodService 9.2.1.5 is currently running.+
    +iTunesHelper 9.2.1.5 is currently running.+
    +Apple Mobile Device service 3.1.0.0 is currently running.+
    +Universal Serial Bus Controllers:+
    +Standard Enhanced PCI to USB Host Controller. Device is working properly.+
    +Standard OpenHCD USB Host Controller. Device is working properly.+
    +Standard OpenHCD USB Host Controller. Device is working properly.+
    +Standard OpenHCD USB Host Controller. Device is working properly.+
    +Standard OpenHCD USB Host Controller. Device is working properly.+
    +Standard OpenHCD USB Host Controller. Device is working properly.+
    +No FireWire (IEEE 1394) Host Controller found.+
    +Most Recent Devices Not Currently Connected:+
    +iPod touch running firmware version 2.2.1+
    +Serial Number: 9E948391203+
    +** Device Sync Tests **+
    +No iPod, iPhone or iPad found.+

    Hi,
    Did you manage to sort this ? I have now had this error 21 message for days. I have tried everything bar uninstalling itunes and reinstalling it ?
    ANy help would be grately appreciated !!

  • Error message when using Safari

    When trying to open a link online (using Safari version 7.0.1), I receive this error message: javax.servlet.ServletException: A problem occurred while instantiating controller and handling request. Does anyone know how to resolve this? This issue only occurred after I got the new Maverick operating system.
    Also listed on the error page are:
    Cannot serve request to /continuing-studies/courses/caba/business-analysis-fundamentals.html on this server
    ApacheSling/2.2 (Day-Servlet-Engine/4.1.24, Java HotSpot(TM) 64-Bit Server VM 1.6.0_45, Linux 2.6.32-358.6.2.el6.x86_64 amd64)

    Thanks for this  - I tried viewing the same site on a different computer and the same error messages were present, so I'm satisfied that the issue has nothing to do with me, my upgrades or my security settings.

  • ITunes could not connect to the iTunes Store "Error Message"

    I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The software reads from Gracenote and imports into iTunes okay. But now my PC cannot access the iTunes store to buy songs, read the tracks on the discs, or display new album artwork. The diagnostic read the network connectivety test, the CD/DVD drive, and iPod connectivity tests all read okay. I followed the directions on checking the network settings under the Internet Options Tool "Connections" Lan Settings and the Automatic detection and still no dice. All I get is "Make sure your network is active."
    Can anybody help out their?
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 ED842AA-ABA M7250N
    iTunes 7.6.2.9
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 425XXXXXXXXXXXXX
    Current user is an administrator.
    The current local date and time is 2008-07-06 01:07:54.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON X300 Series
    RADEON X300 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {1C6FC80D-7300-43A2-A78B-9DFA93BF7727}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: XXXXXXXXXXXX
    Subnet Mask: XXXXXXXXXXXX
    Default Gateway: XXXXXXXXXX
    DHCP Enabled: Yes
    DHCP Server: XXXXXXXXXX
    Lease Obtained: Sun Jul 06 01:02:58 2008
    Lease Expires: Sun Jul 06 02:02:58 2008
    DNS Servers: 66.51.205.100
    66.51.205.100
    66.51.206.100
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    iTunes has never successfully accessed iTunes store.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.7.3),
    E: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.03
    Audio CD in drive.
    Found 12 songs on CD, playing time 39:58 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:18:00
    Track 3, start time 07:16:25
    Track 4, start time 11:23:70
    Track 5, start time 15:23:17
    Track 6, start time 20:15:17
    Track 7, start time 23:04:67
    Track 8, start time 26:10:40
    Track 9, start time 28:59:05
    Track 10, start time 31:31:42
    Track 11, start time 33:32:32
    Track 12, start time 37:03:57
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.2.9 is currently running.
    iTunesHelper 7.6.2.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
    Intel(R) 82801GB USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Connected Device Information:
    HP_ADMINIST (L:\), Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: 8K645xxxV9R
    Bus Speed: 61440

    I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
    "iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
    The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
    After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
    Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
    Ken Newquist
    Lafayette College

  • Error in starting domain controller !

    I have installed on Windows 2000, Oracle 9i Database 9.0.1 and Oracle 9iFS release 9.0.1.
    Configuration was OK, but the domain doesn't start.
    I launch 'ifslaunchdc.bat', 'ifslaunchnode.bat', and when I launch 'ifsstartdomain.bat', I receive this error:
    "An exception occurred while starting Domain controller - oracle.ifs.common.IfsException: IFS-40066: Remothed method threw exception java.lang.NoSuchFieldError: OCIEnvHandle"
    OTHER WAY:
    If I try in Oracle Management Server (from Oracle Enterprise Management Console), I go to Internet File Systems, I go to the domain picasso:53140 and it is launched (yellow light). I do right click and I choose 'Start Domain'. I receive the following message:
    " The Domain Controller 'picasso:53140' is launched
    Command failed:
    IFS-40066: Remothed method threw exception java.lang.NoSuchFieldError: OCIEnvHandle"
    So, the same error, and I don't find anywhere this exception !
    What should be done? Thanks, Jeanina

    I am not sure how you got into this state, but to clear it up you can edit the boot.properties file to enter (clear text) the username and password for the server (entered when running the Configuration Wizard).
    The boot.properties file is located in your domain at:
    <domain root>/servers/AdminServer/security
    Just enter the username and password in the file:
    username=myUserName
    password=myPassword
    WebLogic Server will boot up using these values and immediately encrypt the username and password in the file.
    An alternate approach would be to delete boot.properties in which case WLS will prompt you for the id/pw each time it is started/stopped.
    Brad

Maybe you are looking for