Error message on a new 2GB ipod?

Okay, dont laugh (if it is stupid question)
But when i connect my new 2GB ipod to either of my 2 computers i get message with a triangle like on this picture:
http://a248.e.akamai.net/7/248/51/610031142535203/www.info.apple.com/images/kbas e/61003/61003_1.gif
In the place where the lighting is on this type of battery picture:
http://a248.e.akamai.net/7/248/51/609701144270217/www.info.apple.com/images/kbas e/60970/60970_5.jpg
It isn't color but like on mini or something.
I dont know what else to say? The apple apple blinks, then this, then the apple.
Medion / Dell laptop Windows XP
Medion / Dell laptop Windows XP

OMG, how could you find this?
I was looking for this in the scary dark maze of apple.com and i couldnt find this, thanks.
BTW, Does that only mean i should charge it? LOL

Similar Messages

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Want an Error message if the New Version is not ticked Completed in a PO

Hi All,
I want to display an error message if the New Version created while making any changes in a PO is not ticked Completed in the Header--> Versions. Please tell me in detail how can this be done?

Hi,
To do this goto IMG->MM->Purchasing->Version Management->Set up Version Management for External Purchasing Documents
Here Tick on Version Active & in Field Selection in the relevant fields where you want users to enter data make them as Required Entry. This will post an error message when ever it is not complete.
regards,
JP

HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

IPod won't restore...error message saying "Can't mount iPod"...

I have determined that I need to restore my iPod based on my problem (I manually update playlists and cannot add a playlist because I get an error message saying "The disk cannot be read from or written to.") So I open iPod updater 11-17-2005 to try to restore my iPod and I get an error message saying "Can't mount iPod". I can't restore or update my iPod because of this error message. Can anyone help me? I've been all through the discussions, online help, etc., and can't find this particular error message. Thanks!!

I came to charge my iPod because the battery went low, after few minutes it came on with this do not disconnect, i tried to restore it also says can't mount, it has been exactly two days. I disconnected the iPod and the backlight and the message did not go off until the battery ran out. I also need some help my address is [email protected] Seriously I just got my iPod click wheel 30Gb color display, video, photo.

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software.

When I try to open my iTunes an error message appears saying "New iTunes Library". What should I do?

When I try to open my iTunes an error message appears saying "New iTunes Library". What should I do?

Hi!
Thanks for contacting us today! I understand you are having issues with updating, and using the device.
I believe that we are aware of the update issue however, it is ultimately the carrier/ manufacturer to provide updates. Please contact the respective company for assistance.
As for device using, and things not working. Please provide us with more details. (Note: the bug may have already been fixed, but is available in a later update).
Thanks!

Access Priveleges Error Message - Cannot Trasnfer Songs to iPod Nano

I download songs and then try to transfer from iTunes to my Nano but nothing happens. I've tried both manually and automatic - neither work.
But when I did try to drag the tunes to the iPod icon I got the following error message:
"You do not have enough access priveleges for this action"
Any idea what this means and how do I fix it?
Thanks

I'm having the same problem, without the Invalid Service Version:
---2Gb nano
---Plug in, shows up in device list as a USB drive, even though neither the "manually manage Music" or "Enable Disk Use" is checked.
---139 songs in library, 0 songs on IPOD
---Click "Sync", 1-2 seconds later says updated, still no songs
---IPOD displays "Do Not Connect", if I rclick "Remove Hardware" on taskbar and select "Safely remove USB Drive", Ipod clears and is also removed from Itunes
My Daughter installed this. Smells like the wrong driver is in there, but I can't find an ".inf" file for the ipod. If I delete the USB driver and then plug in the IPOD, it dipays "New HArdware Found Ipod", but the n is says "USB Drive" and reverts to same behavior.
---7.01 Itunes, V1.3 nano software downloaded 10/30.
Any Ideas?

Error message "iTunes has detected an iPod that appears to be corrupted"

Everything used to work just fine until recently. On my Windows XP Home SP3 laptop, with iTunes (version 9.0.2.25) already open, I connect my 5th Generation iPod Nano and get the following message in iTunes:
"iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
If I plug the iPod into the computer without first starting iTunes, the Windows ‘Auto Play’ message comes up immediately then disappears and then the following message appears:
"Your iPod needs to be formatted for use with Windows. Would you like to run iTunes to restore your iPod Now?"
Otherwise, the iPod functions normally when not connected in iTunes. I can play the music, videos, and record videos with no problems.
The troubleshooting steps I took were:
I performed a reset of the Nano by first sliding the hold switch on/off a few cycles, leaving switch off (no orange showing), then pressed and held the Menu + Select button until the Apple logo appeared. Then I tried it in iTunes again; no such luck, same error. I then did a reset again, this time with the iPod connected to an AC power source; still no luck. I tried the reset numerous times and it didn’t help.
Next, I ran the diagnostics by pressing and holding the Menu + Select buttons immediately followed by the Select + Reverse buttons. I stepped through all the diagnostics tests and all tests passed as far as I could tell (there was no errors reported).
After this, I tried it in iTunes again and still no luck.
I even tried the iPod on my Windows Vista Home Premium (32 bit) machine and it behaved the same way. The version of iTunes on that machine was at an earlier version when I first tried it there. I then upgraded iTunes to the latest version but that didn’t help either.
I can sync my iPod Touch and 2nd gen Nano without any problems.
Sorry about be long winded about this but I am wondering if anyone else may have other suggestions. I want to try and avoid a restore if possible because I have some videos I recorded that I would like to get off the iPod. I’m not concerned about my music files as I have them always backed up but didn’t get the videos off yet.

I am having this same problem with my brand new Mac Pro. It seems to be tied to the computer awaking from sleep (no I am not leaving the iPod connected while sleep... I am referring to waking the computer from sleep and then connecting iPod as opposed to restarting the computer and then connecting the iPod). In other words, if you are getting this error message, try ejecting the iPod, restart your computer, then connect the iPod and see if the error message goes away. For me it does, but I only get one shot at it, if I eject the iPod and then reconnect it, the error message returns. This happens on both iPods I have. I have rebooted (hold menu-select) and gone to disc mode (hold select-play) and the error message remains. The only way it goes away is to reboot the computer, then I get one shot at hooking up an iPod.
I NEVER had nor get this error message when I connect to the Windows PC that I started with. Perhaps the iPod does not like moving from PC to Mac?

Error message on the new iOS 4.3.5 update (err= -3259).

Ive tried to update my 3G Ipod Touch with the new iOS 4.3.5, but when the download is on the last 0.1 MB it says ive lost connection, when I havent. Everytime it stops working I get a error message (err= -3259). How can I fix this without taking down my anti-virus or anything like that? I just need a simple solution. Thanks

The simple solution is to temporarily disable anti-virus and firewall software during the update process. Why would you not want to do that? Any threat is non-existent.
Depending on your anti-virus & firewall software it may be possible to make exceptions for certain programs like iTunes and certain ports used during the update. This, however, is more trouble than it is worth.

Error message when connecting 80GB Video iPod

I'm getting this error message when trying to connect my 80GB Video iPod:
"The iPod (name) cannot be synced. An unknown error occurred (-48)."
Never seen this one before.
I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
Many thanks.

Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
null

Error message when syncing Itunes with Ipod

I bought a new laptop and it has Vista. I have downloaded Itunes 8 and updated QT.
When I try and update my Ipod it wants to delete all files and replace as it used to be synced with my old PC.
I get part way through and get an error message -1303 and then the sync terminates. It did this with only 300 tracks from the 2600 available to download.
Any ideas what the error number may relate to? I have searched all over apple site but no easy reference to this.
Any help much appreciated
Lorraine

log into your pc as an administrater

ITunes 7 gives error message when playing songs off ipod

Whenever I connect my ipod to my computer and use itunes to play songs from it...it gives me the following message whenever a song plays.
"iPod is in use and cannot be updated. The required file is in use."
Does anyone know why this would be happening? I have my iPod set on manual update and I have already installed and run the new iPod update so I have no idea why this is happening.
Thanks.
PS. I have a new 5th gen. model iPod.
Powerbook G4 Mac OS X (10.4.7) 12-Inch

Hey ermides,
Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
http://support.apple.com/en-us/ts1539
Thanks,
Matt M.

HT1689 error message when i connect my ipod 'the software for this ipod is not installed correctly. Please reinstall'. I have reinstalled 3 times and still get error message. Any ideas?

I have the same error message appearing for all my apple products. ipad,ipod,iphone and ipod touch. I have reinstalled the itunes software 3 times but still the error message appears and Im unable to download my new purchases or updates playlists. Its really annoying!

Did you:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?

Error message on a new 2GB ipod?

Similar Messages

Maybe you are looking for