Error message on brand new WLC2504; "Failed to write...."

Hello!
I have received a new WLC2504 for my lab, which is nice....  :-)
What's not so nice is that I get a mysterious error message on the console. It appeared when the wizard started at first boot and it apperars at every startup since.
I have gone through the wizard twice and reset to factory defaults in between but the error message persists. It looks like this :
(Cisco Controller)
Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
User:  Failed to write I2C device: Input/output error
[i2c_wr_to_wdt_timer_reg]Got error -1 during tx.
User:
Is this unit ready for RMA/DOA or can I somehow force it into normal behaviour..?.. The GUI appears to be working normally.
Best Regards
Göran Blomqvsit
Sweden

I would suggest talked to TAC & RMA if that is their view on this.
Normally you should not get any errors like this on console, if it is working properly
HTH
Rasika
**** Pls rate all useful responses  ****

Similar Messages

  • Error Message "Service 'Apple Mobile Device' failed to start"

    Tonight I tried to install the latest update for iTunes, only to get the error message "Service 'Apple Mobile Device' failed to start". I tried the installation again with my iPod connected (the only Apple device I own) and it made no difference. So I tried uninstalling and re-installing, and the same error message came up.

    alif1216 wrote:
    turingtest2
    Can you give me an idea of what's going on? I'm not super computer savvy, so baby steps, please.  And thanks in advance.
    Seems some sort of clash between the installed components and the new installer causes the install to go haywire for some people. I don't have a detailed expanation of why, but I do know that attempting to repair or reinstall iTunes alone in the usual way won't work. You need to work through the steps outlined below. I've updated them a little since yesterday....
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

    Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
    This in SharePoint 2013 Farm.
    What should I do?
    1- I did a DisableLoopBack and set the value to "1".
    For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
    P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

    Hi,
    For troubleshooting your issue, please take steps as below:
    1.Go to IIS, make sure the web application is actived.
    2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
    Reference:
    http://support.microsoft.com/en-us/kb/926642/en-us
    http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Want an Error message if the New Version is not ticked Completed in a PO

    Hi All,
    I want to display an error message if the New Version created while making any changes in a PO is not ticked Completed in the Header--> Versions. Please tell me in detail how can this be done?

    Hi,
    To do this goto IMG->MM->Purchasing->Version Management->Set up Version Management for External Purchasing Documents
    Here Tick on Version Active & in Field Selection in the relevant fields where you want users to enter data make them as Required Entry.  This will post an error message when ever it is not complete.
    regards,
    JP

  • The latest version of iTunes did not install properly on my Windows 7 PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services." Can anyone help?

    The latest version of iTunes did not install properly on my Windows 7-64bit PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services."
    I have tried the following troubleshooting steps without success:
    Restart PC
    Uninstall iTunes and attempt to reinstall
    Verify that I am signed in as an administrator
    Download and save iTunes64Setup file, right-click, and run as Administrator
    Disable Norton antivirus software
    Any suggestions would be greatly appreciated!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I'm trying to install iTunes on my pc and i get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services

    I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start.  Verify you have sufficient privileges to start system services.
    What do I need to do to get iTunes to install?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT1349 I'm trying to re-install I-Tunes on my Windows 7 computer.  I get the following error message: Service "Apple Mobile Device" failed to start.  Verify that you have sufficient privileges to start system services.  HELP?

    I'm trying to re-install I-Tunes on my Windows 7 computer.  I get the following error message: Service "Apple Mobile Device" failed to start.  Verify that you have sufficient privileges to start system services.  HELP?

    Did you try to update iTunes through "Apple Software Update"?
    Uninstall everything {iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour , Apple Application Support (iTunes 9 or later)}
    http://support.apple.com/kb/ht1923
    then reinstall itunes. (Download it from Apple's site.)

  • What do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

    what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

    Hello brainiac08
    Typically that error occurs because of a backup issue. Check out the article below to resolve it.
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start".  Anyone ever deal with this?

    When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start".  Anyone ever deal with this?

    Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

    I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

    Hello Valerie Anderson,
    I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
    https://discussions.apple.com/message/21854775#21854775
    Let me know if this helps.
    Thanks!
    Harry

  • HT1926 I am getting an error message "Service Apple Mobile device failed to start. Verify that you have sufficient privelegs to start sytem.

    Trying to install Itunes after a problem with an updates made me uninstall.  I am getting the error message" Service Apple Mobile Device failed to start. VErify that you have sufficient privileges to start sytem services."  Not sure what to do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I keep receiving a server error message with the new beta version of iMessage.  What can I do to fix this?

    I keep receiving a server error message with the new beta version of iMessage.  What can I do to fix this?

    Ok I have a question.
    Why do you want to use Beta software? Especially since you are having this problem with it?
    Uninstall it and forget about it until it is released as a real piece of software.

  • I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    try a reset on your iphone
    make sure you have latest version of itunes
    try updating your iphone over wi-fi before connecting to your itunes
    reconnect ,try other usb ports
    good luck

Maybe you are looking for

  • Using two windows accounts and 1 ipod directory

    I've been trying to set up my computer so that my wife and I can log into our own windows accounts but still pull the itunes music from only one location. I have it set up so that the music gets stored in one location and each account reads the music

  • Yosemite safari bookmarks suck!

    I decided to give Safari a try after years of Chrome, since they've changed so much in Yosemite. But I can't get my head around bookmarks, mainly because Safari does the spinny beachball of death when I try. It has imported my Chrome bookmarks. I pro

  • Is there any clever way to deal with google auto-awesome pictures?

    I'm testing out Lightroom to try to consolidate all my photos from the various sources, phones, cameras, etc. This includes importing all my Google photos pictures that were uploaded by my and my wife's phones.  Google did there nice stuff for me aut

  • How to additional siebel service after configuration is being done.

    Hi everyone,      We've configured siebel with callcenter service only, the installation went successful. Now if we want to add another service for example "ecommunication" what shall i do. Any help is appreciable. Regards Samad Ul Haq

  • Mail sends intermittently

    Apparently Mail settings are stored somewhere other than the mail accounts. In Mail setup following this thread, Mail, Preferences, Accounts, Account Information, Outgoing Mail Server (SMTP), Edit server list,  and delete all references to the old IS