Error Message on EO's method validator does not save

Anyone know why when I define a validation using MethodValidator rule the error message does not save. I enter a string, click ok and click apply but when I look back the error message has disappeared?
Is this a bug? I am using version 9.0.3.5 (Build 1437). I need to use this version for OA Framework OA Apps version 11.5.10CU2

Did you ever figure this one out?

Similar Messages

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]>

When I try to download an iTunes software update I get an error message that my start up disk does not have enough room. What do I do?

When I try to download an iTunes software update i get an error message that my start up disk does not have enough room. What do I do?

You probably have run out of space, I would delete (or move to an external drive) things that aren't being used as much.

Imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer's video card does not meet the minimum system requirements.

imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer’s video card does not meet the minimum system requirements. What to do? Thanks for any help in advance.

I am not 100% sure this is the issue, but I saw a different thread about the ATI Radeon HD 2600 not being OpenCL compatible for another program and that a newer compatible graphics card would be required to solve the problem. I am getting the same message with my 2007 iMac 24".

Number range not update CIN error message Excise group.... does not exist

Hi Guru,
We have created new excise group in SPRO> tax on goods movement/India>basic setting>maintain excise group successfully.
My problem is, when we have update the number range (J1I9) for same excise group, system give the error message Excise group .... does not exist.
Please help on top priority.
Regards
BK GAIKWAD

Sir,
i have allready updated the same & also one thing is more, i have aal the above chnages in development server & then transport the same request to quality server.
in development server it is work fine only in quality server it is not display. please help
Regards
BK GAIKWD

Programatically change the error message thrown by ADF Method validator

Can I change an error message being displayed by an ADF Method Validator?
The message of the method validator can be specified declaratively using the Wizard. But is there anyway I can programatically change it inside the body of the method validator?
Inside a method validator i will check for about 5 conditions and each condition will have a separate error message to reflect the error correctly. I can't use a single message declared by the wizard.
regards,
Anton

Hi,
I think you should look at the follow links, hope they can
help you
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
#Troubleshooting a 404.13 issue using IIS and Failed Request Tracing logs
http://blogs.msdn.com/b/amb/archive/2012/10/10/troubleshooting-a-404-13-issue-using-iis-and-failed-request-tracing-logs.aspx

Wrong error message no. F6556 - Fund Centre does not exist but it do exists

Hello Gurus,
I am trying to transfer an Old PO to Funds Centre by changing the delivery quantity in PO but the delivery date in the PO is of June 2014. I have defined the derivation strategy and system is deriving fund centre correctly but it says that Fund Centre does not exists on delivery date which is 30.06.2014. I have created fund centre from 01/01/1900 till 31/12/9999.
I tried to use FMCN it also gives the error message saying that fund centre does not exist even on current date.
For testing I posted some FI document to that fund centre and it posted.
I am not sure why it is giving error only for PO (PO has a account assignment to project/WBS).
Thanks in advance!
Regards
Rohit Goel

Hello Eli,
The problem was that WBS was using the wrong cost centre with two leading zeros (User created wrong cost centre in test system with 8 character which means 2 leading zeros as prefix) but as per the cost centre structure it should have only one leading zero and rest nine characters must be numeric. I have created a fund centre with one leading zero and that's why system was giving error when using derivation strategy as it is picking cost centre from WBS master data but fund centre was created with one leading zero hence the error was coming. when I was defualting the fund centre specifically for the WBS it was picking because I was giving the correct fund centre.
You also recommended something about leading zeros but it was not fully applicable in our case as we have defined the derivation startegy of populating the cost centre in fund centre field and our cost centre is of 9 chararcter (in table it shows with a leading zero to make it full 10 character) but when it gets populated in fund centre field it gets populated with leading zero means it takes a leading zeros into consideration when it gets derived from cost centre. For example if my cost centre is '123456789' the fund centre gets populated as '0123456789'
But I got the clue to my problem from your hint of leading zeros.
Thanks Once again!
Regards
Rohit Goel

HT5271 I get error message that my version of Safari does not support community tool bar?

Everytime I open Safari I get an error message that saids This version of Safari does not support the community tool bar. How can I fix this situation?

That toolbar/ct plugin seems to cause problems for all who install it!
If you are running Tiger or Leopard:
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
If you are running Lion:
From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
~/Library/Application Support/Conduit
Delete the second item if it is there.
Now select Go to Folder again and enter /Library
From the folder that opens, delete the following items if they are there (you may need your login password):
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station". All my software is up to date and

I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Error message ORA-27101 shared memory realm does not exist,Please help me

My oracle(oracle 8.1.6) is installed successfully,But when I connect to the database it shows me the error:
ORA-27101 shared memory realm does not exist.
How can I deal with it?Please help me.

The OTN Customer Service - Feedback forum answers questions relating to the OTN site and other customer service issues. It does not answer technical or installation questions. Please post your topic in the appropriate forum.
Best Regards, OTN Team

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

TS3274 When trying to download an app an error message appears telling me my device does not support the express checkout when the express checkout is enabled on my settings

Hi I am having problems trying to download apps with the express checkout

Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error Message on EO's method validator does not save

Similar Messages

Maybe you are looking for