Error message on FF startup

I recently upgraded from FF4.0 to 5.0.1 and now whenever I start Firefox I receive an error message. When I click on OK in the message Firefox continues to load and appears to operate normally.

I note you say the error message is ''"TypeError:Components.classes[cid]is undefined"''
This error is often reported and you will need to track down the fault, often with some additional software, one of your ''Add-ons'' that is not working properly.
This post by ''cor-el'' [https://support.mozilla.com/en-US/questions/839198#answer-204277 explains what to do]. <-- clickable link --
Note it will be easiest to disable half your add-ons and then try, if the problem goes away or not you then know which half it is in, next disable half of the problematic add-ons and you know which 1/4 the problem is in. That method will be often be quicker than disabling or enabling one add-on at a time.
It will be useful to know what theme or add-on causes your problem, as no doubt others will have the same problem.

Similar Messages

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Getting this error message: FLAGFOX VERSION: 4.2.x (2013-11) ERROR MESSAGE: Fatal Flagfox startup error! EXCEPTION THROWN: IPv4 DB file is corrupt (got 508296

After the message the program runs fine. How do I get rid of the error?
FLAGFOX VERSION: 4.2.x (2013-11)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: IPv4 DB file is corrupt (got 508296 bytes but expected 504414 bytes)
BROWSER: Mozilla Firefox 26.0 (Gecko 26.0 / 20131205075310)
OS: Windows NT 6.1; WOW64 (WINNT x86-msvc windows)
LOCALE: en-us content / en-us UI / en-us OS

Try posting in the Flagfox forum. <br />
http://flagfox.net/forum/

FLAGFOX VERSION: 4.2.x (2013-6) ERROR MESSAGE: Fatal Flagfox startup error! EXCEPTION THROWN: IPv4 DB file is corrupt (got 493668 bytes but expected 489672 by

FLAGFOX VERSION: 4.2.x (2013-6)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: IPv4 DB file is corrupt (got 493668 bytes but expected 489672 bytes)
BROWSER: Mozilla Firefox 22.0 (Gecko 22.0 / 20130618035212)
OS: Windows NT 6.1 (WINNT x86-msvc windows)
LOCALE: en-us content / en-us UI / el-gr OS

does disabling all addons but flagfox work, you seem to have a lot of cookie programs that may conflict.

ITunes 10.5 Error Message on System Startup. AppleSync Notifier.exe.

On Windows XP startup I get an AppleSyncNotifier.exe error message:
"The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Has anyone else had this problem and if so have you found a solution?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Get an error message on premiere startup

Cant open premiere without error message coming up. Have tried reinstall of premiere and problem persists.
This is the error message:
Process:         Adobe Premiere Pro CC [4020]
Path:            /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/MacOS/Adobe Premiere Pro CC
Identifier:      com.adobe.AdobePremierePro
Version:         7.2.1 (7.2.1)
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     Adobe Premiere Pro CC [4020]
User ID:         501
Date/Time:       2014-02-13 11:24:05.660 +0000
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: BB7DE34C-CDCB-7E7A-9E84-22B3FB25B1FB
Sleep/Wake UUID: A7269950-3E71-4B13-96F6-8F4310D0A908
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
*** error for object 0x138dd4458: pointer being freed was not allocated
[Please don't post crash logs to the user forums.]
Message was edited by: Jim Simon

I am Windows, so can't help directly... but some reading that MAY help
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
or
crash on launch
or
crash on startup
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
http://forums.adobe.com/thread/1236603?tstart=0 for a previous "crash on startup" discussion

What does this error message mean? (startup disk memory)

Hello,
I am running OS 10.7.2 (Lion) on a new'ish 27 inch iMac, and I am getting the following error message appearing randomly on my screen:
"Your Mac OS X startup disk has no more space available for application memory"
There is a yellow exclamation point, and then all of my open applications are listed with a button for "Force Quit" or "Resume". I tried to attach a picture of the error window into this message, but it was rejected and said that I am not allowed to post that type of content (Huh???). I used the "Grab" application to take a shot of the error message, and I thought that was how I could attach the picture but I must be doing something wrong.
I went into "About This Mac", and then I clicked on "More Info". From there, I clicked on "Storage" to see how much memory I have left. It shows that I have 830.19 GB available of 999.35GB, so there is a ton of memory remaining.
Any suggestions? Thanks!

Try resetting PRAM
If that doesn't work WhatSize or OmniDisksweeper may help you find the problem.
smitty195 wrote:
I tried to attach a picture of the error window into this message, but it was rejected and said that I am not allowed to post that type of content (Huh???). I used the "Grab" application to take a shot of the error message,
Grab produces tiffs which do not work with this software, instead use command-shift-3 or 4 for a screenshot jpg.

Java Error Message at Leopard Startup - anyone know how to fix pls?

I installed Leopard two days ago on G5.. ran no probs for two days and then - up pops error message. Have called Applecare and they have no info to help. IF ANYONE HAS ANY HELP I'D BE VERY VERY GRATEFUL. Here's the error message. Thanks!! i
"CANNOT LAUNCH JAVA APPLICATION
Uncaught exception in main method:
java.lang.NoSuchMethodError:
javax.security.sasl.Sasl.setSaslServerFactory(Ljavax/
security/saslSaslServerFactor;)V"
------------------------------------------------------------

As I posted to another discussion on the topic:
Thanks to all of you for your help with this frustrating problem. I think I lucked into the solution.
A look at my library/logs/crashreporter pointed to a problem brought on by a file associated with a program developed by igeekinc, a Japanese firm that makes backup and rescue software. Names connected to igeek include Prosoft, Indelible, Desktop Backup, Data Backup, and others.
My startup items file included the Executor file related to Indelible which seems to have been placed there some years ago when I tried out Prosoft's Data Backup.
I found a Data Backup folder within my Applications folder. It had an uninstaller program. Clicking on that removed the Data Backup, the Indelible Executor, and the Java error message.
Fingers crossed.
Gary

'No Disk' error message on Photoshop startup

Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive \Device\Harddisk3\Dr3 is supposed to mean. Does anyone have a clue what Ps is complaining about?

I realize this is a mighty old thread, but I've recently had the same issue with Illustrator CSS 2014, and this is the only thread I could google that dealt with it.
I scratched my head for a while on this, but I think I figured out the issue. At least I think I figured it out on my end. The error comes from the "recently opened" menu as far as I can tell. I had an old external hard-drive that I was browsing some old work on. I unplugged it when done and continued to go along with my newer work the next day. When I attempted to save my newer work in Illustrator, I got the "no disk" message several times, but powered through it with "try again" till it saved.
I'm thinking the error is just the system bumping the file that I had recently opened and now cannot locate slowly down and eventually off the "recently opened" menu. Not sure why Windows is smart enough to bypass this error sometimes and not others with most portable drives, but perhaps its an issue with how old this drive was, or perhaps because I did not properly eject the drive. Networked drives being connected and not connected may cause a similar issue. Not sure.

"You do not have enough access privileges for this operation" error message on iTunes startup?

So I cleaned up my Macbook recently, and now I am fearing that I may have deleted something important.
Whenever I start up iTunes, I am met with the "You do not have enough access privileges for this operation" error message. I have read forums that advised editing the Get Info page for the iTunes library to allow all users and staff to "Read/Write", but doing this has not eliminated this message.
Any tracks that were not purchased play normally, but purchased tracks now require additional sign-in that I do not believe was required before. Other than this, iTunes performs normally.
Did I mess something up permanentliy or is there a way to fix this?

The problem was that my account wasn't authorized. But when I tried to authorize it, I got an error message saying that the authorization could not be completed. Thankfully, THAT was something that Apple Support had previously addressed.
See http://support.apple.com/kb/ts1277
Thanks, Apple.

Error message after every startup

Every time after turning on my iMac, I get the "Error"-Message:
(beautyful Moiré)
Which is in English:
You switched off your computer due to a problem.
If you want to open the Apps, that were open before switching-off, click "Open" (Öffnen)
Otherwise the login will continue in XX seconds.
I should emphasize, that all is working fine – but the message is a little bit boring.
Does anybody has an idea, what pref(s) keep(s) the false information and can be trashed without causing any bad consequences?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Error messages during vista startup

Hi,
i have strange error messages during Vista 65 loading. Everzthing going well but sistem is booting really slow.
Don't know how explain this except some screenshoots. They are uploaded on link under.
screenshoot1
http://www.shock.co.ba/DSC00116.JPG
screenshoot2
http://www.shock.co.ba/DSC00117.JPG

Hi dotshock,
try this procedure http://www.lancelhoff.com/2008/09/29/unrecognized-partition-table-for-drive-80/
Hope it helps
Stefan

Error message 0xc0000034 at startup / no recovery drive / yoga 13

Hi,
I have an urgent problem: at startup, there is the following message on my screen:
Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error Code: 0xc0000034
You'll need to use the recovery tools on your instillation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer
Press ESC for UEFI Firmware Settings
When I press ESC (or alternativelzy F2 or F12 during startup) I get to the InsydeH20 Setup Utility.
I've searched online and did not find a solution. The main problem: I DON'T HAVE ANY INSTALLATION MEDIA! The notebook came with recovery partition on the harddrive. I applied the official Lenovo hotfix after receiving the notebook. The hotfix repartitioned the HD and also the recovery partition, I suppose. This was a long time ago and I never had any problems since. I also noticed that some time ago, Windows stopped downloading updates.
Help is very much appreciated!!

MORE INFO: It does NOT seem to be an iCal problem; rather a system startup error-- or even when logging-out and logging-back-in I get this. It seems a -39 error is:
-39
eofErr
End of file; no additional data in the format
but I don't know what this means; nor why I'm getting this now, just today, at startup. Should I repair permissions or verify disk or???
Any assistance really appreciated.
Regards, Steve Monday 3 April 2006 @ 13:31

Error message on FF startup

Similar Messages

Maybe you are looking for