Error message on ipod

I just received my older ipod touch back after sending it to apple for a new battery.  After connecting it to itunes it came up with an error message that says an error occurred while restoring this ipod oxe8004006.  What does this mean?

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

Similar Messages

  • When I update my nano ipod I get an error message "User ipod cannot be updated.  The disk couldnot be read from or written to."   How can I overcome this error message.

    In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated.  The disk could not be read from or written to."   How can I overcome this error message.

    Hello there dilip77707,
    It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
     'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

    My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then tap Settings > General > Software Update
    No data is lost due to a reset.

  • Am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, the iPod could not be restored. An unknown error occured (-1).

    Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When I attempt to sync my nano I get an error message: "The ipod cannot be synced. The required file cannot be found."

    When I attempt to sync my nano I get an error message: "The ipod cannot be synced. The required file cannot be found."

    This is getting frustrating.  Every example of my problem has the same reply:
    Try deleting the iPod Photo Cache folder.  This is normally located in your pictures folder.  Once this is done, try syncing again. 
    iTunes: Understanding the iPod Photo Cache folder
    http://support.apple.com/kb/ts1314
    I have NO photos on my Ipod Nano.  I select "Photos" and the Ipod goes to a blank screen with the msg "No Photos" at the bottom.  There must be some other file missing.  Itunes won't connect to the Ipod, I keep getting the same error over and over.  It would be nice if it told me what file is missing. 
    The ipod cannot be synced. The required file cannot be found."

  • Error message:The iPod cannot be updated. The file or directory corrupted..

    HELP!! error message: "The iPod cannot be updated. The file or directory is corrupted and unreadable."
    What do i do?!?! it wont let me update or ANYTHING, it wont even let me delete anything off of it. Its a 5th generation 30 gig about 1 1/2 years old. HELP?!?!
    5th generation 30 gig   Windows XP  

    Hi swiss22!
    Have you tried restoring your iPod? For instructions and info on how to restore an iPod, see this:
    Restoring iPod to factory settings
    If a restore doesn't help, then take a look at this post by Da Gopha:
    Da Gopha: Info on iTunes "corrupt" error messages
    -Kylene

  • HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

    Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Error Message - "The Ipod Administrator's Ipod cannot be sync'd...etc"

    Recently, I downloaded one ITunes U course to my computer. When I connect my Ipod and try to sync to add this course to my Ipod, I get the following error message "The Ipod Administrator's Ipod cannot be sync'd The required disk cannot be found". I tried to uncheck my other playlists and just add this one this course to the Ipod, but I get the same message.

    On your Mac... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?

  • Receive error message, The iPod cannot be synced.  The required disk cannot be found.  iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

    Receive error message, "The iPod cannot be synced.  The required disk cannot be found.  This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7.  This is getting frustrating.  I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once.  I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod.  I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad.  This is the only device that has this issue.

    I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
    Re: 30gb 5th gen. Probs syncing.
    Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
    Try running a disk check out the iPod using the tools provided by windows.
    To do this:
    1. Plug in your iPod and close iTunes.
    2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
    3. Go to the Tools tab. Under "Error Checking", click Check Now.
    4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
    The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
    B-rock

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling :(

    keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling
    I recently bought some new albums and can't play them on my ipod

    I just encountered the same problem on my 2 month old MBPro.  I found a work around by changing USB ports.  As for the actual cause or the reason why that worked, I dont know.  The USB port I was using works fine with my phone or other USB devices.

  • After itunes update my ipod touch is not syncing correctly first I got error message..ipod failed to complete sync because connection was lost..now it wont sync new music

    After recent itunes update my ipod touch 4 is not syncing properly...I got error message twice "ipod failed to sync properly because connection was lost, please try again"... it continued acting weird, now when i click on "sync now" it says preparing to sync, it goes through steps quickly says sync finished but it doesnt update.. can anyone help?

    There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

  • When i connect my ipod shuffle to itunes i get an error message the ipod cannot be synced, the required disk cannot be found  anyone have this happen?

    When i connect my ipod shuffle to itunes i get an error message the ipod cannot be synced, the required disk cannot be found  anyone have this happen? How do i get past it?

    I seem to recall that this may be cause by overloading the USB bus (lack of power to go around).  Shut down your computer.  Reset the iPod shuffle using this procedure.
    http://support.apple.com/kb/HT1655
    Disconnect ALL peripheral USB devices, including keyboard and mouse.  Power up the computer.  If you need your mouse, connect it and launch iTunes.  Connect the iPod shuffle to a direct USB port and try the sync again.  See if there is any difference.

  • Itunes + quicktime error message - service 'ipod service' (ipod service) fa

    Help! Got new iPod Nano for Christmas and I STILL cannot get it to show up in iTunes - it has showed up in my device manager - with an over the icon - "The drivers for this device are not installed (code 28) To reinstall the drivers for this device, click Reinstall Drivers. - Then another error - Wizard cannot find the software to instal -(my iPod did not come with a disk!!!) I have done the "R's" several times! Downloaded and installed and uninstalled several x's from iTunes. Changed USB locations - I have three to choose from. Now - I am 'repairing' the latest installation from iTunes and I get this "itunes + quicktime error message - service 'ipod service' (ipod service) failed to start. Verify that you have sufficient privileges to start system services". Any ideas??? I'm not a computer genious....but I'm not a complete newbie, either! I am so FRUSTRATED!!!! This should be that difficult - I added additional RAM and it was a breeze and successful! This is just ridiculous! Any one have any other ideas???? I have read so much - even emptied the battery and recharged!!! HELP! Please! I just wanna hear some music!!! waaaaaaaaaaaaaaaaaaaaa!

    Thanks - I got it to install by going into 'run' to get to permissions, etc. So that seems OK - but my computer is still not acknowledging iPod software and for some reason iTunes is now showing 'the URL could not be opened' when I go into Help for iPod. It's still not showing up in Itunes, either

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I am trying to sync my 160gb, but get an error message "the ipod cannot be synced. a duplicate file name was specified. it only syncs a small % of music.  any clues?

    i am trying to sync my 160gb, but get an error message "the ipod cannot be synced. a duplicate file name was specified. it only syncs a small % of music.  any clues?

    Hmm.  It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    If necessary, post the resultings numbers and we can verify what the next steps to take.
    B-rock

Maybe you are looking for

  • Can I prevent mounted volume Finder windows opening on startup?

    I look after a studio with about 10 Macs, some of which are running OSX 10.4.11. We automatically mount 3 network volumes containing client data at startup. The Finder always opens a window for each volume but I want to prevent this from happening. I

  • UDP FLOODING and NON-FUNCTIONAL INBOUND LOG

    Hello, I have been using Linksys Routers since 1998, IIRC. I just bought a new "Cisco" (LINKSYS) E1200 and the INBOUND log does not work, even after activation the log function in the "Administration" area. The OUTBOUND log works. Also, my desktop wo

  • Problem to update Extension Manager

    Problem to update Extension Manager 6.0.7 Errore Code: U44M1P7 MAC OS X 10.8.4 For 4 times I contact via chat the support but someone answer me and tell Please wait while I transfer the chat to the appropriate group. But nobody taka care me of the pr

  • Passing parameter into SQL statement in Crystal Reports

    Hi all, I would like to call Crystal Reports in JSP. I can handle it well now. But I hope to let user input their selection criteria before printing out the report. I know how to get the parameter value in JSP, but I really dunno how to pass these pa

  • Non - working day problem

    Hi all, We can insert other type into non-working day by choose Input type W or I or null in T554S. But I can not insert the number of hours. So how to do? Thanks a lot, Quanglv, Edited by: Quang Le Vinh on Oct 9, 2009 11:44 AM