Error message on Madonna - Confessions from a dance floor

when i tried to open the link for the Madonna album Confessions On a Dance Floor (deluxe version) I received a message saying it wasn't going to be available until the year 2038.
is there a way around this or is this simply a bug in the itunes system?

I see that error message, too. It's not your PC.
The top two don't have a price and are bad links, apparently.
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewAlbum?id=92838043&s=143441
The ones under that look OK.
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewAlbum?id=92373731&s=143441

Similar Messages

Getting error message on ungrade install from itunes 10 to itunes 11

getting error message on ungrade install from itunes 10 to itunes 11

What does the error message say? (Precise text, please.)

I am setting up my Iphone 6 but keep getting an error message "cannot restore backup from Icloud...I backed up my old Iphone 5 just yesterday...Any suggestions?

During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud. I backed up my old Iphone 5 yesterday. Is it because of different operating systems? Please help. Thanks!

Does your iPhone 5 IOS is later than iPhone 6 IOS?
If true, you need to update your iPhone 6 before you can restore from your backup.
If not, is iPhone 6 connected to power supply?

Just installed Outlook 365. Now getting an error message downloading pdf's from outlook re: licensing on my acrobat 9 standard

Just installed Outlook 365. Now getting an error message downloading pdf's from outlook re: licensing on my acrobat 9 standard. 148:3

OFFICE 365 is a cloud version of OFFICE 2013. Full compatibility with Acrobat requires an updated Acrobat XI. You will likely have to store the file and then open in AA 9. To create a PDF you will have to print to the Adobe PDF printer or use the MS plugin that has several issues.

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

Error message after transfering CS4 from my old computer

I am trying to transfer my CS4 suite onto my new macbook pro from my old macbook pro. I transfered all of my files from the old to the new but when I try to open a file in the applications I am getting this error message:
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
Also, my cs4 installation disc does not work. When I double click the setup button, the icon bounces and then disappears. Is there a way I can download the program and reinstall the suite using my serial number rather than using the disc? The first time I installed the program, I had the same problem with my purchased DVD's.

I think you have used Time Machine to backup and move your data from old machine to new one. If so, your CS4 has gone corrupt and you might face such issues. You need to uninstall this existing installation of CS4 and then re-install CS4 again.
< Uninstall CS4 using its uninstaller from Utilities->Adobe Installers Folder
< Download and install the Adobe Creative Suite Cleaner Tool and remove the reminents of Creative Suite applications.
< Empty the Temp folder(Go->Go To Folder->/tmp)
< Empty the Trash.
< Reboot the machine and install CS5.5
< Download Master Collection CS4 using the below link but make sure first you read the download instructions properly. http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
< Install CS4 and check.
Hope that Helps!

Please help with error message invoking external service from BPEL

Yes, I'm new to Oracle SOA Suite and BPEL Process manager. I've searched the forums, OTN, and Google and have not found any description of this error message:
"oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: <operation-name>"
Using JDeveloper 11.1.1.2.0 and WebLogic/SOA 10.3.2.0.
The BPEL process was built completely using JDeveloper's graphical tools... I haven't done any raw editing of the BPEL files yet. What types of things might I possibly be doing wrong that would cause this error to occur? Any idea what two things the server is comparing and deciding that there's a mismatch? It doesn't look like it is even attempting to invoke the external service, but bailing out before that, thinking that it's going to send bad data. Below is a bit more detail.
Also, I loaded up the WSDL (same one that I gave to JDeveloper) into SOAPUI. Then I took the payload that SOA was about to send (see below) and pasted it into SOAPUI. SOAPUI didn't complain and the target web service accepted the message and produced a "success" response. It looks like the payload is correct, so I don't know why SOA is complaining.
Thanks for any help you can offer.
=====================================================
Faulted while invoking operation "UpsertEmp" on provider "SiebelUSEmployeeIntegration".
<messages>
<input>
<UpsertEmpInput>
<part name="SiebelMessage">
<SiebelMessage>
<ns1:USEmployment>
<ns1:globalId>123456abcdef</ns1:globalId>
<ns1:employeeId>000123456</ns1:employeeId>
<ns1:effDt>1/1/2009</ns1:effDt>
<ns1:emplStatus>A</ns1:emplStatus>
<ns1:supported>N</ns1:supported>
<ns1:employed>Y</ns1:employed>
<ns1:activeStatus>Y</ns1:activeStatus>
<ns1:hrEditOnly>Y</ns1:hrEditOnly>
<ns1:paygroup/>
<ns1:statusCode/>
<ns1:origHireDate/>
<ns1:termDate/>
<ns1:latestHireDate/>
<ns1:locationCode/>
<ns1:locationDescr>Somewhere</ns1:locationDescr>
<ns1:positionCode/>
<ns1:jobCode/>
<ns1:jobDescr/>
<ns1:supervisorEmplid>000654321</ns1:supervisorEmplid>
<ns1:deptCode>ITG</ns1:deptCode>
<ns1:deptDescr>Information Technology Group</ns1:deptDescr>
<ns1:ministryCode/>
<ns1:ministryDescr>Core Services</ns1:ministryDescr>
<ns1:subministryCode/>
<ns1:subministryDescr>Information Technology Group</ns1:subministryDescr>
<ns1:wwcFreeSubFlag>N</ns1:wwcFreeSubFlag>
<ns1:lakeHartMC>1234</ns1:lakeHartMC>
<ns1:testFlag>Y</ns1:testFlag>
</ns1:USEmployment>
</SiebelMessage>
</part>
</UpsertEmpInput>
</input>
<fault>
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: UpsertEmp</summary>
</part>
<part name="detail">
<detail>Number of SOAP body elements and parts do not match in operation: UpsertEmp</detail>
</part>
</remoteFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>

Welcome to BPEL. Take a moment, and write "it's a namespace issue" on a sheet of paper. Post it near your monitor. It won't always be a namespace issue, but it's usually a good thing to suspect first! Is the namespace prefix ns1: defined somewhere? Does your XML that is being sent really match what the WSDL has for input to the UpsertEmp operation? The namespaces for each element level in the XML need to match, not just the lowest level.
When problems like this get really sticky, you can use TCP tunneling (obtunnel shell?) to capture what is really being sent to the server, and compare that to what is sent from SOAPUI. That's more useful if it's a subtle header problem, but you may get better error messages if you catch the BPEL message and send it using SOAPUI.
Good Luck, Andy

Error message in pulling data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
Best regards,
Christian

Error message when ejecting ipod from itunes

WHen i press eject next to my ipod in my library, an error message pops up stating "the ipod cannot be ejected because it contains files that are in use by another application." What does that mean and how do i make it go away without messing up my ipod? ANyone have answers?

Easy way. Reset the iPod, then disconnect when you see the Apple logo.
Another way. Hold ctr-alt-del to bring up the Windows Task Manager. Go to the Processes tab and look for iTunesHelper.exe and iPodService.exe. Select them and hit the End Process button. Close the Windows Task Manager Window and try ejecting the iPod via the safely remove hardware method.
If you are still having problems you can try one more thing. Right click on the My Computer icon and select Manage from the list of actions. Go to the Services and Applications item and from there the services item. Double click on the services item to bring up the list of services currently installed on your computer. Look for the iPod Service and double click on it. From the new window select Stop. Now try again to eject using the safely remove hardware option.
Some anti-virus security software (particularly McAfee) can also cause a problem, and if you have this you might want to try turning it off and see if the iPod then ejects correctly.

Error message when opening RAW from Bridge to CS2

After opening a RAW image in Bridge it will not then open in PS2. I get the following error message and nothing happens in CS2".
"There was a problem with the database and "P101,,,," was not updated correctly. This may effect searches"
I'm also unable to open any saved photo in CS2 either now.
Any suggestions?
Thanks.
Trevor

After renew settings in preferences the basic set from PS is active. Go trough it and look around what you can use, explore it.
Most important is scratch disk setting, ammount of RAM and I find it useful to change the cursor setting to the last checkboxes.
Read the manual that came with your copy and or try one of the thousands tutorials that are available either free or for sale. There are very good DVD's that shows you the screen from the teacher on your own screen and so you can see what he or she does. Total Training is a good start but there are others.
start here and find your way: http://www.adobe.com/training/

Error message when donloading images from camera....?!?!?

I have been trying to import images from my Canon Rebel digital camera and am having some issues. I was having trouble with iPhoto which is why I purchased this great program. At first, the images were downloading fast and furious with Aperture but now I am having some of the same issues that I was having with iPhoto. It is taking forever and a day to import my RAW images and now I am getting an error message with almost all of my photos. It stalls out on them (and the red light stops flashing on my camera as if they aren't communicating) and then I get the message that there was "a problem downloading that image" and this error code: (ICA download error -609).
This is extremely frustrating!! HELP!
iMac Mac OS X (10.4.6)
iMac Mac OS X (10.4.6)

You're loading straight off the camera?
Be sure the camera isn't shutting itself off in the middle of the transfer. It may auto-turn-off after a minute.
I'd really suggest you use a card reader. You can get a USB2 CF reader which will be 10x faster than direct camera download for like $20. I can't fathom why anyone would use direct-from-camera in lieu of a reader, unless they were doing tethered shooting.

Error message when deleting page from pdf

Each time I try to delete a page from my pdf, I get the error message "One or more pages are in use and cannot be deleted." What does this mean? The pdf is only open in Acrobat.

This error happens to me occasionally and I have never been able to determine why. Sometimes saving and reopening the file does help, but it doesn't seem to be related to email attachments. Sometimes switching from the Page navigation bar to the Page Toolbar or vice versa helps.

Error Message when transferring music from itunes to ipod

When i connect my ipod to itunes it will transfer some but not all songs from itunes to ipod. currently every song in my itunes library will transfer EXCEPT all songs from M-R and i get a unknown error message (-69). can anyone help. Thks.

Hello spk15,
The only suggestion I have to offer is to take a look at this Apple support document if you haven't done so yet.
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
B-rock

Error message on Madonna - Confessions from a dance floor

Similar Messages

Maybe you are looking for