Error message on Managed Clients

Hi Everyone,
This line is from my system.log file. This is logged when every a client logs out on a managed client computer. It stay connected to the AFP server and shows as Disabled/Asleep. We are running a xserve RAID for a file server and a g5 tower for the ldap server. The shares are automounted with AFP. Both servers are running 10.4.3, I had them at 10.4.6 and still got that error on the clients. Clients are 10.4.6 and 10.2.8.
Apr 24 11:29:29 2-08 kernel[0]: AFP_VFS afpfs_unmount: afpfs_flushfiles failed 16
Any Ideas?
Thanks,
Brad

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

I am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

i am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

Hey ktillis88,
Thanks for the question. Based on the information you have provided, the following resource may be helpful:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"Backups for appname cannot be turned off at this time."
This message occurs if disabling Backup for an app on your iOS device does not complete successfully. Wait a few minutes and then attempt to disable Backup for the app again. If you continue to receive this alert, contact iCloud Support for assistance.
Thanks,
Matt M.

I begin to download but I get the error message :|"Application Manager failed to install"

I begin to download but I get the error message :|"Application Manager failed to install"

Hi Gerald,
Welcome to the Community!
Please go through this thread http://forums.adobe.com/message/5428322, it has the initial step and then other steps if that doesn't resolve.
Thanks!
Ankit

Firefox won't start; no error message; profile manager also won't start. What can I do?

Suddenly, firefox won't start. I get no error message--it just won't open. System restore to a month before the problem did not help.
From the suggestions on this page: http://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start... I did not recently install add-ons or clean the registry, so I think it may be a profile problem. But profile manager will not open--only a tiny window with a white rectangle and no text.
I would like to not lose all my bookmarks. And I would like to continue using Firefox.
What can I do?

dmcritchie, thank you for your reply!
Before I received your response, I tried something that seems to have worked. I used Chrome to go to the Firefox website and downloaded Firefox (without uninstalling it first) and went through the installation process again. For some reason, this worked, even though I already had the latest version of Firefox, and I can now open Firefox successfully.
If it stops working again, I will try your suggestion. In the meantime, thank you much!

Error message installing Oracle client on Windows 95 PC...

I am trying to install the Oracle client onto a Windows 95 PC from the original CD. When the CD is placed into the drive it autoruns and brings up the menu. When I choose install I recieve the following error message and installation does not continue. The message states...
The Java RunTime Environment was not found at ../stage/Components/oracle.swd.jre/1.1.7.24/1/DataFiles/Expanded/jre\win32\bin\jrew.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or higher and try again.
...I have gone to JavaSoft's web site, downloaded and installed JRE 1.3.1 or whatever is out there as of today. Even after I have done this and rebooted I still recieve same error. Any ideas would be very helpfull since I am all out of them. Tahnnk you.

You need more space for example 256MB RAM or higher.

Retrieving servlet error message on the client

Hi,
I am trying to display a user friendly error message on a swing client after calling a servlet. Unfortunately the only thing I get is the generic 500 error - java.io.IOException: Server returned HTTP response code: 500 for URL: ...
When I call this same servlet from a web browser I get a user friendly exception message.
Servlet code -
ServletException sEXP = new ServletException("user friendly message");
throw sEXP;
Client code -
URLConnection conn = null;
try
url = new URL(targetURL);
// SSL setup omitted
     conn = url.openConnection();
     conn.setDoInput(true);
     conn.setDoOutput(true);
     conn.setUseCaches(false);
     if (conn instanceof HttpURLConnection)
          ((HttpURLConnection) conn).setRequestMethod("GET");
     conn.setRequestProperty("Content-type", "text/html");
     conn.setAllowUserInteraction(true);
     conn.connect(); // Error is thrown here
catch (IOException ioe)
// ioe is now a generic 500 error with the message thrown from the server missing.
Thanks,
Dave

5xx errors means that the server is knackered. So there is no real way for the server to be nice about the errors.
You can try added error pages in to web.xml, but they are less likely to be able to handle 5xx errors.
Normally, a web server (like apache) is placed in front the J2EE web-server to catch this kind of stuff and be nice to the client.

Error Message: Project Manager has run out of Memory

Hi there
So. I’m running Logic Pro on a Mac Pro and a Mac Book. No problem with it on the Mac Pro, but get this error message every time I open Logic on the Mac Book:
Project Manager has run out of memory.
The Mac Book has 1GB 667 MHz DDR2 SDRAM and 43 GB Hard drive space available.
Can you help?
Kind regards
Tim Arnold

Ah yes, good old Project Manager. There are plenty of times when it causes more problems than it solves.
You might try deleting the following folder:
User/Library/Preferences/Logic/PM Data
If you use Project Manager, it's easy enough to rebuild the table. If you don't then don't worry - just delete it. By the way, if you're into Project Manager or would like to know more, go to the website of the perhaps the most generous man in the Logic world, Edgar Rothermich and grab some of his user manuals.
http://homepage.mac.com/edgarrothermich/Manuals.html
Pete

DSEE 6.3: how to show detailed error messages to ldap clients?

Is there any possibilty in DSEE 6.3 to send to ldap clients detailed error messages about - for example - missing required attributes in ldap add operation?
I don't have access to ldap server's logs, so I loose a lot of time trying to figure out "which of 40 attributes I sent to server is bad?"...

Thank you for reply.
I know that I can view schema, but I need the functionality which is available in relational databases. When I try to store bad field value in database table, I get descriptive error message: "field XYZ has bad value". In DSEE I get "schema violation" or other cryptic message.
It's very hard to track the problem if you operate on 30 or more attributes. Which one causes error?
I see that this functionality is available in DSEE backend (error logs are descriptive). How to turn on this for clients?
If it is not possible, I will try to write special software module which will double DSEE functionality and check attributes before storing them in DSEE.

I am getting the following error messages Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7

When I tried to install latest updates to Lightroom I am getting the following error messaage:
Extension Manager 6.0.8 Update
Installation failed. Error Code: U44M1P7
Ca you explain what I need to do to resolve this?

Jjmarmour please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

Sync error message about mail client - using Outlook Express, wants Outlook

I keep getting a message that "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client"
Outlook Express IS set as my default mail client, both on my computer and on the iTunes screen.
I use Calendar on the iPhone, but do not have sync requested on iTunes for this function.
I do have Outlook on my computer, but do not use it (don't need calendar function at home, but do like to have it on my iPhone since I carry it with me)

I'm having a similar problem. "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Office Outlook and set it as the default mail client." (iTunes 7.6.1.9)
I sync my contacts with Yahoo! (not Outlook).
I was syncing my calendar with Outlook. This was working just fine, but when I started to get the error above, I have tried turning off the calendar sync. No help there.
I am not syncing any email accounts via iTunes.
Anyone have any suggestions? Given that I'm not syncing with Outlook I don't understand the error. Thunderbird is my default mail client and I shouldn't have to change the system defaults to work around this bug.

Error message - Conduit Manager Volume is Locked/File is locked

Just bought a new Tungsten E2 and tried to sync to my new Mac OSS .51. When I try to sync, I repeatedly get a message saying "Conduit Manager, Volume is locked." After clicking "ok" about 5 times, I get a message saying "File is locked."
Also, which connection should be selected from the available connections in preferences?
Post relates to: Tungsten E2

I just found the answer on another site since I had the same problem with my Zire 72. It worked fine and then didn't. Here's the solution from that site cut and pasted below. I've included the person's name who had the solution on the bottom so he gets credit.
However, there are times that your userdata really locks up on you due to some minor application duplications. If ever you experience this problem:
1. Search for "user data" file. Get info and then checked if the data is locked. If data is locked, unlock it.
2. Go to Sys Prefs. Go to accounts. Under My Accounts, check startup items. Try to check if you have Palm Desktop Background and Transport Monitor. If you have duplicates of both or triplicates, delete them. Make sure that you only have one for each file and the type is "application".
3. Search for "com.palm.HS" files. delete those files. restart your mac and you're up and running.
Ian Douglas
Post relates to: Zire 72

Error message on "appclient -client CartAppClient.jar "

Hi,
I try to run the cart application in ../j2eetutorial14\examples\ejb\cart from [http://java.sun.com/j2ee/1.4/docs/tutorial/doc/index.html]
I followed each step mentioned in doc and finally :
To run the J2EE application client, perform the following steps.
In a terminal window, go to the <INSTALL>/j2eetutorial14/
examples/ejb/cart/ directory.
Type the following command:
appclient -client CartAppClient.jar
=========================================================
G:\java\j2eetutorial14\examples\ejb\cart>dir
Volume in drive G is Local Disk
Volume Serial Number is 943D-C5F9
Directory of G:\java\j2eetutorial14\examples\ejb\cart
02/05/2004 11:39p <DIR> .
02/05/2004 11:39p <DIR> ..
02/05/2004 06:20p <DIR> build
04/02/2003 02:17p 336 build.xml
02/05/2004 11:39p 6,723 CartApp.ear
02/05/2004 07:27p 20,529 CartAppClient.jar
01/15/2004 04:47p <DIR> src
3 File(s) 27,588 bytes
4 Dir(s) 1,024,557,056 bytes free
G:\java\j2eetutorial14\examples\ejb\cart>appclient -client CartAppClient.jar
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-client to select the "client" VM
-server to select the "server" VM
-hotspot is a synonym for the "client" VM [deprecated]
The default VM is client.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
G:\java\j2eetutorial14\examples\ejb\cart>
=========================================================
regards
Mukesh

Amazing. I thought I had to be the only person on the planet with this problem, which I just figured out today. I also had a "/" at the end of my path variable. The ending "/" only causes a problem if it's at the end of the last entry in your path. Good catch!!

Error Message - Import Manager

Helllo All
I recieve a message when trying to import some records
The Map cannot be loaded because the table "Record" is not a source.
We are "missing" the table "Record" from the dropdown.
Can some one tell me how I can add/fine this table again?
Regards
Con

Hi,
In your case the "Record" disappears whenever you have only one record in your XML file. Instead of displaying nodes under "Record", it displays all fields under its parent node (let us say "Records").This situation occurs specifically whenever you are trying to import an XML file without refering to an XML Schema.
To make things clear further: You created a map with an XML file that has more than one record i.e., with a file that has the "Record" node. So, whenver you try to open the map with another XML file that has only one record it fails as there is no "Record" node.
Solution: Always refer to an XML Schema. This way, you are enforcing the XML structure i.e., "Record" node will be available even if you have only one record in your input XML file.
Please let me know in case you need more details in this regard.
Hope this helps,
Regards,
Rajani

8330 Error Message: Desktop manager has encountered a problem and needs to close

I have installed Desktop Manager and had success synching my new 8330 with Outlook 2007 (on XP). Next time, though, it crashed. I uninstalled/reinstalled, it seemed to work once, now always crashes. I do have recurring appointments with reminders and have heard this might be the problem; is there a workaround? I also disabled the option to synch up past appointments w/no luck. Thx.

Hi. I did get my problem resolved after an hour or so on the phone w/the Blackberry folks, but I'm not positive what the problem is/was. I once again uninstalled the desktop manager, but also deleted the Intellisync folder completely. Then I reinstalled it and it worked...and has continued to work just fine for the past four days. I don't really know what "fixed" it, but just thought I'd say the issue has been resolved. Thanks.

ITune U Course Manager Error Message

I am trying to update my course info by adding a picture and editing the course description. When I click on save I always get the error message:
Courese Manager has encountered an error.
Then I have to reload the course manager which means my changes weren't applied. Any ideas how to get around this?
I have the latest OS. One thing I am wondering about is if having Microsoft Silverlight on my computer might be affecting this? I need this for a brief time for work so I can dump it in a couple weeks.

we have the same problem! Why they do not share information about this! Have been looking all day for more information.

Error message on Managed Clients

Similar Messages

Maybe you are looking for