Error message on Maps?

I just discovered that when I ask for directions on the Maps application since the upgrade, I get an error message that says "Directions could not be received".
All of the other functions on Maps work.
Anyone else getting this?
This is my first post.

Jason helped me too. After a recent sych, my contacts lost the US as the country for various addressed and that messed up google. Once I set the countries, it worked again. Good luck.
http://discussions.apple.com/thread.jspa?threadID=1364515&tstart=0

Similar Messages

  • Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61

    Hello!
    I tried to install the new patch (update) for my installed Designer 6i.
    But the installation failed. I allway got that following ERROR-Message:
    "Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61"
    Whats wrong? What should I do?
    Thank you
    Uwe

    once i faced similiar problem i was installing typical installation then i used custom and installed only the necessary components i needed then it worked ok .

  • Custom error message in mapping-Alert

    We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
    My question is,we would like to send this custom error message to email receipients through RWB-AFW.
    How do we capture this custom error message is alert category or alert rule?

    SOLVED!!!!
    UDF call to RFC-FM by passing payload dato in t it

  • How to XI error message will mapped to the SOAP faul message-SOAP(Axis)

    Hi,
      Receiver end I am using SOAP (Axis) adapter and I am getting the system error and I am not getting the payload in SXMB_MONI.
    What ever the error message how do MAP as a SOAP Fault message in SXMB_MONI.
    I found the Solution from OSS note 1039369 but did not explain where to set what parameter and what modules...
    SOAP Fault code
    If parameter Category is XIAdaptger, Area SOAP, Code FAULT
    In this case, parameters P1 and P2 may be set to the fault namespace and fault name. If these parameters are set, the SOAP fault code is set to namespace P1 and name P2. Otherwise, it is set as in other cases.
    For all other cases
    In this case, the SOAP fault code is set to namespace "http://sap.com/xi/XI/Message/30" and name category.area.code, where category, area, code represent the XI error category, area, and code values, respectively.
    SOAP detail
    If parameter ApplicationFault is set
    The SOAP detail child is set to the XI application payload. If, however, the payload extraction mode is set to Envelope, the application payload is taken as the SOAP envelope and the SOAP detail content is set to its body content. Similarly, if the extraction mode is set to Body, the application payload is taken as the SOAP body and the SOAP detail content is set to its content.
    Otherwise
    No SOAP detail content is set in this case.
    Examples
      XI error element
    <sap:Error ...>
      <sap:Category>XIAdapterFramework</sap:Category>
      <sap:Code area="MESSAGE">GENERAL</sap:Code>
      <sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
    </sap:Error>
    SOAP fault element
    <soapenv:Fault>
      <faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
      <faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
      <detail/>
    </soapenv:Fault>
    Help appriciated
    Regards,
    Venu.
    Edited by: Venugopalarao Immadisetty on Sep 24, 2009 3:39 PM

    Using Receiver SOAP Axis adapter and I am getting the below exception
    XI error element
    <sap:Error ...>
    <sap:Category>XIAdapterFramework</sap:Category>
    <sap:Code area="MESSAGE">GENERAL</sap:Code>
    <sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
    </sap:Error>
    and above exception how do I convert as a SOAP Fault message..
    SOAP fault element
    <soapenv:Fault>
    <faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
    <faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
    <detail/>
    </soapenv:Fault>
    Any idea what modules need to add in Receiver SOAP Axis adapter.

  • Error Message: Split mapping created no messages

    Hi,
    I just would like to ask you views on this type of error message.
    Could anybody please explain to me as to how this error occurs?  What are the factors that causes this error?
    Thank you so much.
    Grace

    check this link, similar problem is discussed....
    Re: Split mapping created no messages -Mluti Mapping
    it might be your payload of the source is not what it actually exopecting to create the target strucutre...

  • Error Message External Mapping Not Complete Yet

    Hi,
    I have the following scenario.
    Component A <b>is Embedding</b> Component B.
    Component B has a Componenet Controller that makes a<b> Service Call</b> to a Function Module.
    The <b>Top Node in the Context of Component Controller of Component B (</b>which is same as the name of the function module being called) is marked with :
    <b>Interface Node = 'X'
    isInputElement = 'X'.</b>
    The IMPORTING Node gets the isInputElement = 'X' property.b The CHANGING node does not.
    The Context of COmponent Controller of B looks like
        Context
            Name_of_Function_Module
               IMPORTING
                   Attribute1
               CHANGING
                  Attribute2
    <b>Now in Component A, in the Component Usage of B-> Interface Controller , I declare the Usage of Component Controller of Component A</b>
    I did the external mapping of the Top Node of Component B(throught the interface controller) to that of Component Controller of A.
    I created a View in Component A, declared usage of Component Controller of A in this View, did context mapping from View Controller of A to Component Controller of A and binded the IMPORTING node attributes to the Inputfield.
    I made sure I instantiate the Used COmponent B in the WDDOINIT() method of the COmponent Controller of A
    WHen I run the application I get the error
    <b>External Mapping for COMPONENT A # Name_of_Function_Module.IMPORTING.Attribute1 Not Complete Yet</b>
    What am I missing here?
    Thanks
    Message was edited by:
            SAP  User

    Thanks Regina,
    In my case, I have to have the IMPORTING Node and NAME_OF_FUNC_MODULE node as isInputElement = 'X' because the values for the Importing parameters comes from the outer component .
    The <b>CHANGING</b> Node<b> does not</b> have isInputElement = 'X' because the data flow is from the Imterface Controller of Component B to the Component Controller of Component A.
    The problem was that I had wrongly marked the Node for Component Controller of Component A, which is mapped to the View COntroller of A, as isInputElement = 'X'. I removed that and it worked fine..
    In a nut shell, the followiing holds true for External Mapping
    1) The SOURCE of data is ALWAYS from outer Component to Inner Component, that is for Eg: from the COmponent Controller of Component A to the Interface Controller of COmponent B, if A Embeds B
    2) The Controller Usage of Component A has to be declarred withing that of the Interface Controller of B (and not the other way..THIS IS IMPORTANT, since the source of data is the Component Controller of A, so B has to Use A and not Vice-Versa)
    3) The Source of data for Nodes with isInputElement <b>=</b> 'X' is always the COmponent Controller (or Custom COntroller) of the OUTER Component, while that with isInputElement <b>NOT EQUAL</b> 'X' is the Interface Controller of the INNER Component
    Regina, Pls input ur comments

  • Error message when mapping to a network drive of a DFS share on Windows 7

    Hi,
    We are getting the following error when mapping to a network drive of a DFS share on Windows 7:
    “The mapped network drive could not be created because the following error has occurred:
    A specified logon session does not exist. It may already have been terminated."
    In our case, the user logs on his workstation using his regular domain account, then maps to the network DFS share using the service account of an application.
    There is a fix from Microsoft (MS KB968264). But this fix requires disabling the "Network access: Do not allow storage of credentials or .NET Passports for network authentication” property. This is against the Microsoft own best practices (Network access:
    “Do not allow storage of passwords and credentials for network authentication” should be set to
    ENABLED), and is NOT acceptable for us for obvious security reasons.
    Question: Does anyone know an alternative fix to this issue that does not introduce security risks?
    Thank you in advance!
    Mdjona

    Again I have tried this, but in my program if I try to save to the a drive when no disk is inserted, the JOptionPane i want to display is not coming up.
    the system prints out
    java.io.FileNotFoundException: A:\image.jpg <The device is not ready>
    If that makes any sense to you

  • How do I resolve error message "mapi was unable to load aplzod.dll"? Outlook2010 on Win7

    Attempts to open Outlook calendar files (apparently located) on iCloud result in the error message "MAPI was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\Internet Services\APLZOD.dll". Be sure the service is correctly installed and configured."
    I am running Outlook 2010 on Windows 7. I have uninstalled and reinstalled iTunes with no apparent effect. Is this a problem with iTunes or Outlook, how do I resolve it?

    That's part of my problem - I was getting the error message when I tried to click on iCloud in the Calendar portion of Outlook 2010. I don't know where it was generated (iCloud, iTunes, or as an add-in to Outlook).
    After my original post I tried restoring my computer to a date when I knew this worked, the restoration worked, and I can access my calendar. So that problem resolved itself.
    I do have another question, but I'll post it separately. Thanks for your response.

  • HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

    I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

    Did you install the airport utility for windows?
    Is the windows computer set to home as network location.. it will not work if it is set to work or public.
    Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
    Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
    No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
    If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
    That is usually the most foolproof method.

  • System error message while using maps check in

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

    today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use   the maps application a lot of times so i need this problem fixed please
    am using Nokia 500 btw

  • Script error message when printing google maps driving direction into PDF

    My system; Win 7/ 64bits/IE 9 both 32 and 64 bits/Adobe Acrobats 10.1.1. Pro
    Intial problems in printing web sites into PDF files has been resolved when I upgraded into 10.0.1 after having installed IE9.
    However, with 10.1.1. version, I noticed that when I tried to convert google maps results for a driving direction (From A to B), script error message showed up and I could not convert it into PDF. I tried both IE 9 32bits and 64 bits version, but both failed to do it. Please fix the problem for the next updates.
    Thanks

    You might try running CHKDSK on the disk to where you try to save the file. You might have a corrupted file directory or a damaged track on that disk. I urge you to backup what you can before trying this.
    Ken F.

  • N97 system error message when starting Maps

    Hi all,
    I do get a system error message when starting the maps app.
    I know that this is not a new topic but I did not find after intensive search a solution.
    - Firmware is updated
    - soft reset done
    - it seems that the app is not installed
    - have deleted the cities folder and the qf file
    Unfortunately no change - maps app does not start.
    Not sure that this is important but I want to mention this for the sake of completeness:
    - the maps did work once
    - when I started them the next day and I was at a different location it still showed the location of the previous evening abnd did not recognize where the phone was
    - after some time I could not start the the maps app.
    Any help greatly appreciated!
    Best

    Ahhhhhh I want to scream. This phone is driving me crazy...so many problems.. latest among others is, opening maps it gives me the error like you all mentioned above.. so how and where do I go to download what you mentioned... and I did try to go into"download" and my phone just says I don't have enough memory to download anything.. HELP

  • Catch mapping error message in BPM Exception branch

    Hi dudes,
    Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
    Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
    Many thanks in advance!
    Paco

    Thanks,
    My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
    I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
    Message Class: SAI_MAPPING
    Message Number: 217
    Message Type: E
    Message Variable: com/sap/xi/tf/_<MM name>
    Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
    Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
    The text in bold is the one I am interested in to be get and mapped into the exception branch.

  • File Sender Scenario - Mapping error message

    Hi All
    Scenario
    I am trying to develop a test scenario where a record is read from the file and sent to R/3 using RFC (Bapi)
    So i believe this will involve a file adapter as sender and a RFC adapter as receiver, I have configured data types, message types, message mapping, interface mappings, sender determination, receiver determination etc.
    Problem
    When i put the text file in the polling directory the file is read, but there is an error,
    On checking Processed XML message in SXMB_MONI I see that the following steps listed
    1 - Inbound message (CENTRAL)
    2 - Receiver Determination
    3 - Interface Determination
    4 - Receiver Grouping
    5 - Message Branch According to Receiver
    6 - Request Message Mapping
    7 - Request Message Mapping
    Step 1 - 6 does not show any error message, step 7 has an error with the following message
    <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_basic_paycreate_file_to_rfc_map~</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException<;/SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
    Additional Information
    My Business System Commnication channel has a Sender File adapter, this file sender is configured to read from file system from a certain directory and message protocol is File Content Conversion.
    In Content Conversion parameters input fieldname and input separator are configured (does anything else need to be configured in this section?)
    My input file is of the structure aaa,bbb,ccc,ddd,eee,fff,ggg
    My Data Type is of the structure
    <data header>
         <aaa></aaa>
         <bbb></bbb>
         <ccc></ccc>
         <ddd></ddd>
         <branch1>
                   <eee></eee>
         </branch1>
         <branch2>
                   <fff></fff>
         </branch2>
         <branch3>
                   <ggg></ggg>
         </branch3>
    </data header>
    Questions
    First question is why is there 2 instance of Request message mapping showing up in the monitor? Isn't this supposed to show up only once?
    Second question it appears that the problem is something to do with Mapping (Message Mapping) but i tried to test the message mapping manually using the data generated in the payload and it passes the mapping successfully.
    Third question, how is the input flat file converted to the complex structure of data type (as mentioned in additional information above) is this done by the input.filedNames that assigns the corresponding values from flat file to the data type?
    Fourth question - is there a way to run the process step by process (as a step through in other programming IDEs?) so the problem can be more easily identified?
    Thanks
    Anant

    Hi  All
    I little update - it appears that some of the scenarios developed earlier that were working earlier are now also failing at the same process of mapping with this error message.
    So i am suspecting that this is not a problem with the mappings in  my scenarios but rather a some technical setting related to how XI invokes this class - com.sap.aii.utilxi.misc.api.BaseRuntimeException.
    Does any one have any ideas what i can check to confirm this? Whether the problem is in the technical setting or the scenario configuration?
    thanks
    Anant
    error message attached.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_CheckDeposit_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_CheckDeposit_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Adapter Status Error :  Error in creating message ID map for JMS message:

    Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
    Error in creating message ID map for JMS message:
    ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b';  detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
    Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
    Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
    Time Stamp     Status     Description
    09.06.2009 13:27:24     Success     New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
    09.06.2009 13:27:24     Success     JMS message converted to XI message format successfully
    09.06.2009 13:27:24     Success     RRB: entering RequestResponseBean
    09.06.2009 13:27:24     Success     RRB: suspending the transaction
    09.06.2009 13:27:24     Success     RRB: passing through ...
    09.06.2009 13:27:24     Success     RRB: leaving RequestResponseBean
    09.06.2009 13:27:24     Success     Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
    09.06.2009 13:27:24     Success     Transform: transforming the payload ...
    09.06.2009 13:27:24     Success     Transform: successfully transformed
    09.06.2009 13:27:24     Success     Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
    09.06.2009 13:27:24     Success     Trying to put the message into the call queue.
    09.06.2009 13:27:24     Success     Message successfully put into the queue.
    09.06.2009 13:27:24     Success     The message was successfully retrieved from the call queue.
    09.06.2009 13:27:24     Success     The message status set to DLNG.
    09.06.2009 13:27:25     Success     The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
    09.06.2009 13:27:25     Success     The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
    09.06.2009 13:27:25     Success     The message status set to DLVD.
    Not sure why this is occurring.......

    No, not using correlation id.
    I was able to resolve the issue on this queue by changing the following setting
    Under the PROCESSING tab, under XI SETTINGS
    Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
    I have changed this to 300 seconds and the adapter has now gone green.
    BUT......
    That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
    correlation settings:
    Set XI message id  to  = GUID
    Set Xi conversation

Maybe you are looking for

  • Broken Links in iTunes - files have not been moved

    Hi, I'm running iTunes on my XP machine. I have about 10,000 tracks in my library. Every so often (well quite often nowadays) I get a load of tracks that have the exclamation mark next to them saying the file can't be found. I have not moved any of t

  • PLESE HELP ME.....THANK YOU

    My name is RJ, I have a new issue now, is about my marketing class.. I need to create a HEAD LETTER AND A LOGO for my presentation on this friday but I dont know what software can I use to make this.... Would you help me.. I'm using a powerbook g4 Ve

  • LSI 1394 OHCI Compliant Host Controller driver for Windows 8.1

    I have an HP Z600 with a LSI 1394 OHCI Compliant Host Controller and get an error. It is a "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE error When Windows 7 is installed, there is no error but with Windows 8.1 running there is thi

  • Refresher from an old excel user

    I am just learning the ins and outs of numbers, and really could use a tutorial about if/then formula writing/ merging cells, basics, etc. Any suggestions on an interactive program? thanks Electrik

  • Do I need two subscriptions?

    Not sure how or when but I ended up with two subscriptions and I am wondering if they both are duplicates of the same thing. One of them is costing me $29 and is listed as: Unlimited minutes Unlimited calls* to landlines and cell phones in the United