Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

C7250 All in one Wireless radio not working

I have a C7250 All in one printer that suddenly the wireless stopped working. I ran the wireless test and it says the radio is on but the radio fails. The wireless LED is on, any suggestion on what could be the problem?

Shut off the printer. Hold the # and 6 keys while and a for a few seconds after turning it back on.
If that does not work, it is toast. You could plug it into your router with an Ethernet cable and it would have the same functionality and still work with wirelessly connected computers.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8500 A909g (all in one) wireless radio not functioning

Ran network test report and received an Error message: Officejet Pro 8500 A909g (all in one) wireless radio not functioning.
the menu screen says its on and the blue light is on, but no connection.
Appears to be a hardware problem, any ideas.
Thanks

Hello Minabird4
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your wireless radio is not working on your HP Officejet 8500. This could be a hardware issue if the wireless card has failed completely, but I would like you to try the HP Support document: Performing a Partial Reset of the All-in-One. If resetting the printer as the document gets you to do does not fix the issue, it would be recommended that you contacted HP technical support for repair options.
US support link to contact options for laptops purchased in the US.
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&lc=en
Outside of US support link to contact options for laptops purchased outside the US.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Photosmart C3180 All-in-One printer -- SCANNER not working.

I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
If I can get any help from others I'd appreciate it!

HP provided this link to software which resolved my scanning issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

Photosmart C7280 All-In-One Wireless Not working

My wireless printing was working fine with my Photosmart C7280 for about at least a year or more and now recently the wireless side stopped working. My Apple devices (both iPad and Macbook) stopped recognizing my printer. Even when I tried to add via IP address, it would not take.
My printer is working fine when hard wired thru both my PC and Macbook via USB.
I tried resetting my printer network settings by restoring to Network Defaults and adding back in my SSID and Password. It shows it is connected. But when I run a Wireless Network Test Page from within the printer settings, it shows everything passed and signal strength is excellent. However, the last diagnosis in the summary shows "No" to "Other networks detected matching your network name (SSID)" so I am wondering if my printer is actually connecting properly to my network? Since I have other wireless devices connected to the same SSID.
I turned both the printer and other devices off and then on to reboot. I turned the wireless radio within the printer settings off and on again.
Another thing I'd like to mention is that before I deleted the printers in my Apple devices, they still showed my Photosmart 7200 series, but stated they were inactive.
Also when I was able to get into my Verizon FIOS Broadband Router Management software thru my browser, it showed all my wireless devices, but it also showed my Photosmart as being inactive wirelessly, where the other devices that were turned on at the time were showing connected.
I am wondering if it may have been a recent Apple update that may have caused this problem? However the Verizon Fios also showed the printer as being inactive so I am guessing not?
I have been working on this issue for days and spent a ton of time thus far, so any suggestions to resolving this issue would be greatly appreciated.
I am about mid-level in technical understanding. So please spell out answers to any resolution steps very simply in your reply.
This question was solved.
View Solution.

Honestly, ISP-issued routers are very problematic. Restart the Westell by pulling its power cord momentarily just before trying to connect the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

C7289 All in one- wireless printing not working

It looks like all connected for wireless printing, however, nohing will print! Please help

Print a Wireless Network Test from the front of the printer (Setup > Network area). Does the printer have a valid IP address (not 0.0.0.0 or 169.254.x.x)?
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart C6180 All-in-One printer will not work

Printer worked one day and the next day it did not and now will not turn on. I did not turn it off. It went off all by itself. Only 3 years old and not over used. Have checked outlet and power cable. Green LED light comes on when connected to outlet but as soon as I connect it to the printer, the light goes out and the printer will not turn on. Is it dead?

I have the exact same problem
Where do we find a solution

HP Photosmart C7280 All in One installation problems with windows 8.1

Hi,
I have a HP Photosmart C7280 All in One printer which was working fine on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Following this the printer would not work at all, and I got prompt/warning message to re-install the printer software. So I went to the control panel and removed all the old HP software, and tried to re-install the latest one from the HP site...to no avail.
I have tried doing this a number of ways - manual download, downloading the HP software that determines what software is required, then downloads it for you....
It seems to start unpacking ok, but then gets stuck on 'Checking System' and never progresses to do anything else. Help!
This question was solved.
View Solution.

Hello Cam77,
Welcome to the HP Support Forums. I see that you are encountering difficulties installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.
I have included the Windows 8: The Progress Bar on the Software Installation Stops or Stalls document. It will walk you through the steps to get the printer installed.
Please let me know if you encounter any difficulties while doing the above. If you do, please let me know at what step things went awry and what any error messages said. Please also include how you have the printer connected (USB cable, ethernet, or wireless). Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled' press (I don't recognise the icon!)
What is the button & what is the solution?

Hello, I don't have a floor model of that printer available and the manual for this printer does not mention the pump motor. But I would first try removing and reseating all the cartridges in the printer and power cycle the machine. If you are still getting that error message I would do a hard reset that involves removing the cartridges. No user settings are lost with a hard reset and it is a very common tool used to try to resolve a hardware issue with a printer. To do a hard reset with removing the cartridges:
While the machine is powered on take all the cartridges out of the machine. Close cartridge access.
Then pull the power cord out of the rear of the Product, and then unplug the cord from the wall outlet.
Wait at least 20 seconds.
Plug power cord back into wall outlet and then back in the rear of the printer. It should power on by itself but after 10 seconds or so use the power button to turn machine on
Wait for printer to go through start up process and as it recognizes the cartridges are missing (the display panel will inform of missing cartridges) put them back in their slots.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Since I installed Mountain Lion operating system, I cannot print. I have a HP Photosmart C7280 All-in-one printer. I get a message when I try to update the software "Server not available The software update service is currently not available."

After installing Mountain Lion, my printer doesn't work. I know it is connected as it shows up, The message is:
"The printer software was installed incorrectly. Please reinstall the software for this printer or conact the anufacturer for assistance."
I used the disk that came with the printer as when I go to the HP site, it tells me that Apple has the drivers needed. I unistalled the printer and reistalled. Previously, I just went to the HP website an everything worked fine for drivers, program, etc. I never had to use the CD that came with the printer. My printer is: HP Photosmart C7280 All-in-one, it is wireless, but I even took the computer and plugged it into the printer to make sure that everything was connected. Can someone please help me to get this working,
Thank you,
Cheryl Paul

Here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

I have a hp photosmart c7280 all in one and i get a message that says "pump motor stalled.

I have an HP photosmart C7280 All in One and I get a message that says pump motor stalled. I have done everything from resetting and turning it off. I have checked to make sure that there is not any paper jam. It makes a clicking sound after it has been reset and then the message "pump motor stalled" pops up. Any suggestions or should I just toss and buy new??? It is only three years old but it is out of warranty.

You might try the suggestions in this post. There is also a post here that reports success.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Photosmart c7280 All-in-one Network Issues

Hi, i was given this printer (Photosmart c7280 All-in-one) by my dad about a year ago it worked flawlessly for quite some time. However a few months ago we had a really bad storm and lost power and ever since then I have been getting error messages and my network radio has not been working at all. I am afraid that it might be fried but if i could have any help troubleshooting it at all that would be greatly appreciated! Also, i was reading some other help forum posts and tried to reset it (# and 6 while powering on) and it printed out a connectivity status report by itself. It says "The wireless network interface (Wifi0) is not functioning properly. This may be a problem with the printing device hardware." Again im afraid it might never work again but any help is appreciated! Thanks

Hi,
Since you have tried performing reset and printer status shows as WIFI ICU not working, you can try connecting printer with an ethernet cable and use as a network printer.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Photosmart C7280 All-In-One & feed other than plain paper

I have a HP Photosmart C7280 All-In-One printer. This printer is supposed to be a photo printer however the paper feeder does not accept any paper other than plain paper. i have purchased some a4 heat transfer paper but the paper feeder does not pick it up. there ae options in the print settings to change the type and thickness of the paper being used but it seems useless. and there is no manual paper feeder so it renders this printer a basic plain paper printer which is to what it is advertised to be. it is part of my business that i am able to print on paper that is the thickess of glossy photo paper and cards for invitations which is certainly why i purchased this model. Any assistanve ou can provide would be greatly apprecited. thanks.

Sorry you are having this problem. I have a C7280 and have printed from main paper tray on thick card-stock paper, photo pape, heavy greeting card stock and iron on transfer paper without any problem . I did not have to change any settings except the printing type (I normally use fast economical printing) and paper type (if appropriate) on the printer document properties page and printing shortcuts tab.I think you need to get on the live chat with a technician because you should not be having this problem. I have had good experiences with live chat.
The smaller photo paper tray works fine for me too with the special sized photo paper.
This may not help much but it shows the paper handling specs...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01082650&cc=emea_africa&lc=en&dlc=en#N1368
Terrib
Message Edited by terrib on 11-06-2009 09:37 AM

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home... My printer is set up to print wirlessly on my Network. I need to know is there a firm wear update i can get or a good app to install so i can print??

hi there,
This article should have everything you need to get started . Check it out and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

Similar Messages

Maybe you are looking for