Error message on page loading using SAFARI

I need to understand this message that appears on the bottom of a page from sites loaded. I dont remember having this experience before - the message goes like this ' Loading "http....."...completed 74 of 89items' and it just stays there! or some time its more annoying when the message says competed 123 of 234 items and when the 123 number progresses to say 126 the 234 items remaining increases to a higher number, and so on until the loading page just freezes!!
At times the page appears on screen but the message at the bottom have an additional message within brackets like (2 errors).
Help much appreciated.
Message was edited by: Chemat

Hi C:
We were all "green" at one point in time!
Go to the menu bar when you are in the finder (not Safari). Click on "go" and then "home" (the little house). A finder window will open. Click on library. Click on preferences. In that list you will find the preference file (com.apple.safari.plist). Move that file to the trash and then restart the computer. Preference files sometimes (rare, but it happens) become corrupted. When one is missing, OS X creates one with default preferences.
Barry

Similar Messages

  • Firefox just stopped working! It opens but wont load any sites and gives no error messages. internet working as using safari now.

    Was in the UK yesterday and Firefox was working no problem. Arrived back in Denmark today and FF has stopped working. Mac was closed down for the flight over. Firefox opens and does nothing.. when I click on a bookmark the address bar stays empty and the little search icon continues to rotate. Reset firefox and still get the same problem. I am using the same internet connection I used before going away! Please help!

    Check the connection settings.
    *Firefox > Preferences > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do other browsers and services that can contact internet like e-mail work?

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone.  There was a problem loading the application."  please help as we are trying to locate an ipod with pics of a no deceased loved

    I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone.  There was a problem loading the application."  please help as we are trying to locate an ipod with pics of a no deceased loved one.

    Had the same problem and the same message --  was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer.  Hope this helps. 

  • Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V

    I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
    See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
    but it it gets a "java stopped working error"
    Thanks in advance
    WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
    Server Error in '/test/helloworld' Application.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error:
    Line 37:                     <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
    Line 38:                     <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
    Line 39:                     <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
    Line 40:                     <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
    Line 41:           </compilation>
    Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    === Pre-bind state information ===
    LOG: User = IIS APPPOOL\DefaultAppPool
    LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
    (Fully-specified)
    LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
    LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
    Calling assembly : (Unknown).
    ===
    LOG: This bind starts in default load context.
    LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
    LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
    LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
    LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
    LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
    Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
    gacuil output
    VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
    C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
    \gacutil.exe /l Oracle.DataAccess
    Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
    Copyright (c) Microsoft Corporation. All rights reserved.
    The Global Assembly Cache contains the following assemblies:
    Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
    29c47342, processorArchitecture=x86
    Edited by: burk_s on Jun 6, 2010 2:42 PM

    Hi Mubarak,
    Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
    http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
    http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to fix CUPS corrupted (Dyld Error Message:   Library not loaded: /usr/lib/libcups.2.dylib)?

    Hello,
    After trying to change my printer settings on CUPS administrator area to allow to share my wirelless printer to my VirtualBox environment (somehow virtualbox doesn't detect my wirelless printer) I notice that this area stop to work. After it I try to update  the CUPS by installing a new version. I admint that I am a newby in unix environment and I downloaded the  CUPS v1.6.1 and installed through the terminal,
    ./configure
    sudo make
    make install
    After restarting apple site no longer opened like also my home page. Other programs also stopped working and always warn about the same error described bellow. I posted my last try which was reinstall my system Snow Leopard (Mac OS X 10.6.8). Does anyone deal with this problem before? How can I reinstall at least the operation system or just fixing this library will solve the problem?
    Note: The reason of using virtualbox is that I need to use a prescribed software that only works in windows environment and since I need to make work in other places the wireless printing is the only viable way to do this.
    Process:    
    Install Mac OS X [58962]
    Path:       
    /Volumes/Mac OS X Install DVD/Install Mac OS
    X.app/Contents/MacOS/Install Mac OS X
    Identifier: 
    com.apple.installassistant
    Version:    
    Build Info: 
    InstallAssistant-480000~1
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [207]
    Date/Time:  
    2013-02-11 01:18:18.198 +0000
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:     
    48784 sec
    Crashes Since Last Report:      
    10094
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                 
    D1A4D697-3F20-4799-9396-A5CEDA61BC62
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /usr/lib/libcups.2.dylib
      Referenced from:
    /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/P rintCore.framework/Versions/A/PrintCore
      Reason: no suitable image found.  Did find:
    /usr/lib/libcups.2.dylib: mach-o, but wrong architecture
    /usr/lib/libcups.2.dylib: mach-o, but wrong architecture
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???)
    <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core
    2 Duo, 2.26 GHz, 2 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D),
    Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MJA2160BH FFS G1, 149,05 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N, 7,24 GB
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403,
    0x26500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.),
    0x8213, 0x06110000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.),
    0x0237, 0x04600000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2and

    Here is another option.
    I had the same problem with my Mac OSX System 10.8.4 after update cups from 1.6.2 to 1.6.3.
    I have a MacBookPro with the same system version and copy the libcups.2.dylib file form /usr/lib/ then replace the error file in my other Mac.
    1. Install cups 1.6.2 again
    2. Replace the file libcups.2.dylib in /usr/lib/ directory with this one libcups.2.dylib
    Note: I added the link if you dont have an other mac in the same version available.
    This works for me.

  • Parser Error Message: Could not load file or assembly 'DreamweaverCtrls

    Hi,
    After attempting to view my first asp.net page I was greeted
    with the following error:
    Parser Error
    Description: An error occurred during the parsing of a
    resource required to service this request. Please review the
    following specific parse error details and modify your source file
    appropriately.
    Parser Error Message: Could not load file or assembly
    'DreamweaverCtrls, Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=836f606ede05d46a' or one of its dependencies. The
    system cannot find the file specified.
    Source Error:
    Line 1: <%@ Page Language="VB" ContentType="text/html"
    ResponseEncoding="iso-8859-1" %>
    Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
    %>
    Line 3: <MM:Insert
    Line 4: runat="server"
    Source File: /s4/admin/wiki1/detail.aspx Line: 2
    Assembly Load Trace: The following information can be
    helpful to determine why the assembly 'DreamweaverCtrls,
    Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a'
    could not be loaded.
    I have deployed the files using dreamweaver and it says "no
    files to deploy". I have a bin folder with the correct .dll in it,
    in the correct root folder. So whats happening??
    Please help
    Cheers
    G

    Are you testing on the server or locally. If the latter is
    true make sure
    that a copy of the controls is in a bin folder at the
    C:\inetpub\wwwroot
    level.
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "graham6117" <[email protected]> wrote in
    message
    news:e2ngbc$sib$[email protected]..
    > Hi,
    >
    > After attempting to view my first asp.net page I was
    greeted with the
    > following error:
    >
    > Parser Error
    > Description: An error occurred during the parsing of a
    resource required
    > to
    > service this request. Please review the following
    specific parse error
    > details
    > and modify your source file appropriately.
    >
    > Parser Error Message: Could not load file or assembly
    'DreamweaverCtrls,
    > Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=836f606ede05d46a' or one
    > of
    > its dependencies. The system cannot find the file
    specified.
    >
    > Source Error:
    >
    >
    > Line 1: <%@ Page Language="VB"
    ContentType="text/html"
    > ResponseEncoding="iso-8859-1" %>
    > Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    >
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,cultu
    > re=neutral" %>
    > Line 3: <MM:Insert
    > Line 4: runat="server"
    >
    >
    > Source File: /s4/admin/wiki1/detail.aspx Line: 2
    >
    > Assembly Load Trace: The following information can be
    helpful to determine
    > why
    > the assembly 'DreamweaverCtrls, Version=1.0.0.0,
    Culture=neutral,
    > PublicKeyToken=836f606ede05d46a' could not be loaded.
    >
    >
    > I have deployed the files using dreamweaver and it says
    "no files to
    > deploy".
    > I have a bin folder with the correct .dll in it, in the
    correct root
    > folder. So
    > whats happening??
    >
    > Please help
    >
    > Cheers
    >
    > G
    >

  • New preview function for iPad–error message "Multiple page sizes not supported"

    When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x  1296. I would really like to preview this folio before publishing. Any suggestions?

    If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

  • Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

    I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen :  root. ChangeLocation.ChangeLocationStart".   I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
    btw, I have plenty of free space on my device.  HELP!!!
    I tried Handmark support several times, to no avail.  Thanks very much.  mike

    I'm having the same problem.  Have tried uninstalling, reloading, nothing.  Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option.  Help please!

  • Error message "Unable to load plug-in type"

    Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
    post create and update but we are getting this error on any entity updates and creates..
    Any help on how to resolve this issue with be deeply appreciated.
    thanks in advance,
    Future MVP

    While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
    What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
    The solution I have is:
    a. Import just the plugin assembly without the new plugin steps, and publish.
    b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
    c. The solution should now be imported successfully.
    What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
    By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
    HTH anyone else experiencing the same issue.
    Henri

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • How do I resolve itunes error message " ipod cannot be used because the apple mobile device service is not started"?

    After I had Best Buy restore my ipod to factory settings,  went to itunes from computer to restore my music. Getting the error message " Ipod cannot be used because the apple mobile device service is not started". Ipod is connected to Wi-Fi, connecting to itunes o.k. on ipod

    http://support.apple.com/kb/TS1567
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I am trying to download Adobe Flash Player 10 and i keep getting an error message Unable to load a G

    I'm trying to download Adobe Flash
    Player 10 and i keep getting an error message  "unable to load  GUI" i am currently using
    Windows XP Professional   is anyone able to help me?  I am almost 6
    5 and have a very limited knowledge of computers!!!!!!!!!

    Hi Terry, A post is the message that anyone has just typed in. When you replied to me, that was your post. I am replying to you so this is my post. Think of it as sending an email or mailing a letter at the "post" office.
    Now right at the top of the last post (message) you sent me is a Post#, then the date and time and under that the thread subject "Re: I am trying to download Adobe Flash Player 10 and I keep getting......
    The first time that you posted, you described your problem. The next post after that is #1 and so on.
    The Adobe Flash Player forum works very much like email except there are a lot of "threads". A thread is what each message you see is called. Everyone that registers can start their own thread (subject). Then other people see it and can post to your thread and try to help you with your problem.
    You did pretty good, you registered, and you started your first thread
    Now do you feel somewhat more relaxed?  Hope so.
    Take a look now and see if you can find the Post# and etc that I described above.
    Thanks,
    eidnolb

  • I cant sync my iphone 5s on windows itunes, keep getting error message unable to load dataclass information from sync services.

    i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
    I have tried uninstalling itunes and re-installing it.
    Turning off firewall and antivirus.
    Has anyone had this before and if so how did you over come this issue?
    Thanks in advance

    Hey troyboi12345,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue, follow this article.
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    Have a nice day,
    Mario

Maybe you are looking for