Error message on PO creation on
Hello EveryOne,
Please can I have some input into the erroring massage below when I enter in a Purchase Order into SRM 5.0 system without a Shopping Cart.
"Executing target system SRMCLNT01O differs from the system for Accounting P&G1"
We are running SRM 5 in extended classic mode.
many thanks,
Vijay Vadhera.
Error message for EnjoySAP purchasing transactions are generated with the mmpur_message macro.
mmpur_message 'E' 'ZQM_COMMON' '003 var1 var2 var3 var4.
where E -> type of message (information/warning/error)
ZQM_COMMON -> message class
003 -> message number
var1, var2, var3, var4 -> different message parameters
Similar Messages
-
Error message during cube creation
Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you. -
i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?
I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help. -
Error message during TO creation back ground
Hi All,
We have configred the movemet type 309 and 321 with auto matic TO creation, after that we have schuduled a job (with program RLAUTA11)to create TO automatically , but for some of the posting changes TO es are creating automatically, but some of the posting changes TO are not creating and in the job log we found the error message"No quants exist for posting changes" message no : L3 094.
Could any one please kindly show the resolution for this issue.
Thanks & Regards,
Murali.Short Text
No quants exist for posting changes
Diagnosis
No quants requiring a posting change were found.
Procedure
Check your entries.
If memory serves, there is some called "quant" that is used in the TO creation. Obviously, with the quant that you have specified for that TO, nothing can be done. This is not exactly an ABAP question, you might need to ask your MM/WM consultant.
Additionally, you may use "where used" feature in SE91 to find where in the programs this message occurs and what validations happen before that. -
Not able to display error message in PR creation.
HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
JayantHi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant. -
Warning message instead of error message during PO creation in QM in procurement
Hi,
I activated QM procurement for a material and put a control key with delivery release, certificate required and invoice block....Now for that material, vendor and plant combination created QM info record and put some release qty...Now after the release qty is reached then when I am making next Purchase Order system is throwing warning message instead of error message and allowing me to create PO...where I need to convert the warning message to error message...
Thanks
KumarHello Kumar,
Never tested this ;
Anyways, Set Message control for lock as "Defects" for respective Control key.
Path: QCC0>QM in Logistics>QM in Procurement>Define Control Keys.
Amol. -
How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type
In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin -
Error Message ME083 During Creation of PR (ME51n) Charge to Sales Order
Dear MM Expert,
I am creating PR(me51n) with accoutn assignment cat C- Sales Order.
After enterring Quotation no and line item, the system still trigger the error message ME083 Enter Sales Document.
The Sales Order No field is set as mandatory and even if i key the value of the quotation no, still the error message appear.
I tried to create PO (me21n) with the same account assignment and enter the quotation no and system accepts without any error.
Any OSS note that can rectify this. Thanks in advance.
SheHi,
I am assuming you have a Account Assignment Category,-- This means you have to enter a Sales order number in the PR line item , ine ME51N , Line Item " Account Assignment" Tab,, enter the Sales order number and line item number and you can get rid of this error message.
Hope this helps,
Thx
MJ -
Just recently when attempting to export a video into the .wmv format, QuickTime Pro 7.2 gives me this alert message, "Inconsistent Audio Sample Rate. The media you are exporting contains audio with multiple sample rates." QuickTime will not compress (export) to .wmv. It will export to .mov. and .m4v.
This problem is new. For more than a year my weekly video exported to the .wmv format without fail.
I am working on a Mac G4 Dual Processor and iMovieHD.
Any help you can offer would be greatly appreciated.
Mac G4 Dual Processor Mac OS X (10.4.10)Just in from flip4mac support:
The recent release of QuickTime 7.2 created an audio compression error for Flip4Mac WMV Studio, Studio Pro and Studio Pro HD customers. Specifically, when encoding WMV files with Flip4Mac WMV v.2.1.2 using uncompressed audio sources on QuickTime 7.2 systems, customers were receiving "Inconsistent Audio Sample Rate" error and the encode will fail. This problem has been resolved with the beta release of Flip4Mac WMV v2.1.33. If you are using QuickTime 7.2, please upgrade to this release at http://www.flip4mac.com/wmv_beta.htm -
Hi all
Purchasing organization 001 assigned to company code 001,
when user want to create Vendor with P.Org 001 and comapny code 002
the system should give error message
During Vendor creation ,if the wrong purchase organisation is selected, system is allowing to create the vendor master.
Even though ,I have done the Setting in the following , the error message is not reflectiog
1. Message Control for Vendor Master Data
2.T.code : OBMSG
3.T.code : OBA5
Kinldy let me know the steps if possible let me know userexit to solve this......
Thanks & Regards
chandHi,
In the exit FM EXIT_SAPMF02K_001 you have your company code and Purch. Org. in the following fields:
I_LFB1-BUKRS (Company Code the vendor is being created in)
I_LFM1-EKORG (Purch. Org the vendor is being created in)
Having above, you can check in the table T024E ( here you have assignment of Purchasing Org to Company Code) if there is assignment between Purch. Org and Company Code.
Hope it helps.
Regards,
w. -
Error message "ORA-12547: TNS:lost contact" during dbca
Background info: I am building a new test 11.2.0.3 RAC cluster running on IBM pSeries hardware with AIX 6.1 OS level. I need to practice building a cluster and then adding a new node later. Because of limited hardware availability, my inital cluster will have 1 node and I will add the additional node later.
I installed Grid Infrastructure successfully. GI and ASM are online and appear to be working normally. Today I installed the 11.2.0.3 database software. I am now trying to create a test database using DBCA. After entering all of the database information (SID information, where db files should reside, memory sizing, etc.) the database creation begins, then immediately issues the error message "ORA-12547: TNS:lost contact".
I have searched MOS (Metalink) and also reviewed a few sites using Google. All of the information indicates this problem occurs most often when trying to log into an existing database using sqlplus. I haven't found anything related to this error message during database creation.
Does anyone have advice on how to troubleshoot where the problem is coming from? Can you point me to some documentation that would help with this issue?
Any and all help is appreciated. Thank you!Srini,
I was verifying that I understood your request. The last install log relates to the Oracle db software installation and was created by OUI. The DBCA utility has not created any actual install logs. DBCA issues the error less than 10 seconds after I choose the "Finish" button to begin the database creation process. I also reviewed 4 notes on MOS and unfortunately they do not seem to apply. The permissions settings appear correct on all directories for both the database software owner and the grid infrastructure owner as well.
Here are the last 200 lines from the OUI install log. Thank you again for all of your help!
$ tail -200 installActions2012-07-16_10-20-11AM.log
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_skipharegistrationFlag is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_srcOracleHome is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_skipHARegistrationFlag is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /u01/app/oracle/cmdseries/11.2.0/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of scripts to be executed as root user = 1
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Number of scripts to be executed as root user = 1
INFO: User accepted to run root scripts
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: Setup completed with overall status as Succeeded
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <setup>
INFO: Completed validating view at state <setup>
INFO: Validating state <setup>
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Get view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@6f286f28
INFO: Initializing view <FinishUI> at state <finish>
INFO: Completed initializing view <FinishUI> at state <finish>
INFO: Displaying view <FinishUI> at state <finish>
INFO: Completed displaying view <FinishUI> at state <finish>
INFO: Loading view <FinishUI> at state <finish>
INFO: Install Succeeded: true
INFO: Config Tool Succeeded: true
INFO: Remote Install Succeeded: true
INFO: Completed loading view <FinishUI> at state <finish>
INFO: Localizing view <FinishUI> at state <finish>
INFO: Completed localizing view <FinishUI> at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Adding ExitStatus SUCCESS_WITH_WARNINGS to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 6
INFO: List of warnings encountered in this Application:
INFO: PREREQS_FAILED_WITH_WARNING
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
$ -
Error Message WY 030 . Vendor master creation
Hi all
The Error Messgae *WY 030 :Purchasing organization &1 assigned to company code &2, not &3*:+ Need to activate as a ERROR MESSAGE.+
During Vendor creation ,if the wrong purchase organisation is selected, system is allowing to create the vendor master.
Even though ,I have done the Setting in the following , the error message is not reflectiog
1. Message Control for Vendor Master Data
2.T.code : OBMSG
3.T.code : OBA5
Thanks & Regards
DPstrange.
in my system WY 030 message is this: Entry & in table & does not exist
what do you call a wrong purchasing organisation?
I guess you have several organisations in the system.
lets make an example:
purchasing PORG1 is assigned to company code CC1
purchasing PORG2 is assigned to company code CC2
purchasing PORG3 is assigned to company code CC3
and I guess
you want prevent a user to create a vendor master with company code CC1 and purchasing org PORG2
You just cannot do this.
All company codes are valid and all purchasing orgs are valid.
It is just to combination that would logically not make sense while creating.
but if this vendor is used in all companies, then you have 3 CC views: for CC1, CC2 and CC3,
and you have 3 purchasing views for PORG1, PORG2 and PORG3
would you still say that a vendor master with CC1 must not have PORG2 ? -
Error message display for PO creation with reference to internal orders
Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa MurthyHi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy -
Error in IDOC creation of Inbound Delivery (VL31N) with Error Message Number VL561
H,
I'm getting an error message when generating a test IDOC of Message type DESADV and IDOC type DELVRY03 to create Inbound delivery with reference to a standard purchase order.
Essential transfer parameters are missing in record: PO Number and Item
Could you one help me out in solving this.
Thanks,
RajHi ,
Goto SM13 .
Find the terminations based on user and creation date.
Get the same analysed by ur ABAP team.
Also check the confirmations in PO at Item level.
Regards
Ramesh Ch -
Custom Error Messages in Sourcing Cockpit do not prevent PO creation
Hi forum gurus,
We are implementing SRM 5.5 SP 9 in extended classic mode. We have implemented sourcing cockpit too.
We have coded an error message in the 'BBP_ITEM_CHECK' BADI for the sourcing cockpit and it appears correctly in the sourcing cockpit when necessary.
However, the system still allows the PO to be created, despite the error message being visible prior to clicking on the 'Create Purchase Order' button.
Any ideas? I will create a customer message to SAP with this anyway, but hoped someone may know for certain how to resolve it!
Thanks,
NickHi,
Use the BADi "BBP_DOC_CHECK_BADI".
See the foll thread:
authority check on Creation of Purchase order usin badi BBP_ITEM_CHECK_BADI
BR,
Disha.
Pls reward full points for useful answers.
Maybe you are looking for
-
Tax Clg a/c in FBCJ with O/I Mngt - Urgent
Hi sap gurus.. In FBT configuration i have created paid accounts and the same has to be posted in payable accounts also..for payable accounts i have created GL masters with Open item management. In F-02 it is working promptly , but in FBCJ when iam g
-
is there a way to create a time-stamp button that, when pressed, populates a cell with the current time from the cpu's clock? currently, i manually input the time in a 'start' and 'end' field for the purposes of generating total hours for a project.
-
Hi I'm evaluating mapping tools, like toplink. Is there any method I can use in my evaluation? I'm thinking something like the XP-method? I'm going to measure performence an functionallity and I will probobly use JUnit and JUnit performence as my too
-
Why file size is aligned to 4096 ?
I have this code in a .BAT file: cl /Zi /nologo /W4 /WX- /O2 /Oi /Oy- /GL /X /c /GF /Gm- /Zp4 /GS- /Gy- /fp:precise /fp:except- /Zc:wchar_t /Zc:forScope /GR- /openmp- /Gd /analyze- "/FdC:\Users\Leinad\Desktop\OSTools\VisualStudioProject\Kernel\Kernel
-
Is there a way to export a pdf with all indesign markups?
Guides, formatting, etc?