Error message on searching for system updates and news feeds

I always get an error message when I attempt System Updates and when I attempt to subscribe to news feeds through the app that is pre-loaded on my phone. Any help is greatly appreciated.

Hello Mitch4815,
Thank you for reaching out for assistance with the New Feeds on your new Droid Bionic. I too own this device and I hope that you are as happy with yours as I am with mine. I've subscribed to the Reuter's Technology News on my Bionic so I can stay in the know on the latest and greatest rumors in the wireless world. Not only is it my job but I enjoy reading the speculation on the latest and upcoming devices. Needless to say I've had an experience that's similar to yours.
When I received a subscription error, I had to do a factory data reset on my new Droid Bionic in order to successfully subscribe to the News Feeds. Although I do recommend that you try this, let's save this step as a last resort. Please try to remove the battery while the device is powered on & re-insert then power the device on. Afterwards, verify that you have a good 3G/4G signal, anything more than 2 bars. If you are still experiencing access issues then the factory data reset would be the next step. Here is a link on how to perform a factory data reset on a Droid Bionic.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=46649
Of course you will have to reactivate your device after the factory reset. Prior to completing the reset I recommend verifying that your contacts are backed up on either backup assistant or on your Gmail account. Also, your pictures, videos, and music will be saved on the memory card so this info is not in danger. After you have completed the steps above, please reply to this message as your experience may help others.
Thank you for being the best part of Verizon Wireless.

Similar Messages

When i open itunes it get this error message (-42110) just did an update and it still didn't go away????

hen i open itunes it get this error message (-42110) just did an update and it still didn't go away????

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

Error message when searching for an object link within EasyDMS

Hello,
I have a problem with the easydms system. Everything works fine except searching in the object links. When I want to define an object link and I don't know the name of the object I try to find it with the help of the search function within easydms (within the object links).
But the search always delivers an error message:
"Missing authorization check to display master data"
Does anybody now what to do?
Thank you for your help.
Best regards,
Markus Sigl

Hi Markus,
When you try to do this the BAPI 'BAPI_HELPVALUES_GET' is used. There are some authorization checks that are being performed for the object. These authorizations are maintained in the table BAPIF4T.
For the above said test data, you are trying to get the help values for
the relevant field (e.g. EBELN: po_number).However,in table BAPIF4T the corresponding authorization for the data element ebeln is not maintained. And so you are getting this error.
So, when you maintain the below record in the table BAPIF4T,you will
have the corresponding authorization and you will not get the error
anymore.
sample entry:
Object type - ' '
Object type component - ' '
BAPIF4T-DTEL - 'EBELN'
BAPIF4T-FNAM - 'PLM_HELPVALUES_AUTHCHECK'
Best regards,
Christoph

I get an error message whenever i download an update and it tries to install

For the last month on my macbook pro i have downloaded the softwart updates successfully, but about 3 mins into installing i get an error message that they were unable to be installed (error message)
this is the last error message in my library receits folder:
30/04/11 9:25:35 PM    airportd[20]    [most time: (1.021038) _scan] trace: <CFArray 0x1005015d0 [0x7fff70169f20]>{type = mutable-small, count = 6, values = (
    0 : <CFString 0x10003acb0 [0x7fff70169f20]>{contents = "pref_netwk_AJ"}
    1 : <CFString 0x10003acf0 [0x7fff70169f20]>{contents = "1_pref_netwk"}
    2 : <CFString 0x100501220 [0x7fff70169f20]>{contents = "(1.021038) _scan"}
    3 : <CFString 0x10050b6f0 [0x7fff70169f20]>{contents = "(0.000010) _lookup"}
    4 : <CFString 0x100510170 [0x7fff70169f20]>{contents = "(0.021015) _keychain"}
    5 : <CFString 0x100507b10 [0x7fff70169f20]>{contents = "(0.844108) _association"}
com.apple.message.domain: com.apple.airport.autojoin.summary
com.apple.message.signature: AutoJoinSuccess
com.apple.message.result: success
com.apple.message.value: 1.904088
com.apple.message.value2: 1.000000
com.apple.message.value3: 1.000000
com.apple.message.uuid: 9E686503-A026-47AA-A26C-695AAA432F87

I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!!

HT5278 i get an error message when i try to update and i don't know what to do

I am trying to update my iphone with the ios 5.1.1 but every time i download(2hrs), it gives me an error messg and will not update!

What error message are you recieving?

Since uploading Firefox 4 I get error messages saying it can't update and I should be sure I am using the latest version. I am, so why will updates not load?

The question is in the title. I have had no updates to Firefox 4, just error messages saying they can't be loaded and I should check that I am using the latest version. I have downloaded Firefox 4 again to be sure my copy is up to date but it makes no difference. I still get the error message.

Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)

Client context error message while configuring for social login and personalization

Hi,
I am getting the below exception while configuring for social login and personalization.
27.12.2012 11:21:25.463 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper Problems while creating connection.
27.12.2012 11:21:46.549 *WARN* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper token was null or not in UNAUTHORIZED state:1
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.servlet.OAuthProfileImportServlet requestAccessToken: could not retrieve user
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587506549] GET /etc/cloudservices/facebookconnect/sample_fb.login.html HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:48.455 *ERROR* [127.0.0.1 [1356587508455] GET /etc/clientcontext/default/contextstores/profiledata/loader.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Uncaught SlingException org.apache.sling.api.SlingException: An exception occurred processing JSP page /libs/cq/personalization/components/profileloader/command/load/load.json.jsp at line 41
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspExceptionInterna l(JspServletWrapper.java:574)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspException(JspSer vletWrapper.java:499)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:451)
at org.apache.sling.scripting.jsp.JspServletWrapperAdapter.service(JspServletWrapperAdapter. java:59)
Thanks,
Shankar .A

Hi Shankar,
Any luck with this issue. I am also seeing the same issue
Thanks
Pushparajan

I keep getting an error message when I try to update the new soft wear..

What can I do to fix this?

What software are you trying to update?
Which update are you trying to apply?
And what exactly is the error message you keep getting?
Which macbook pro do you have?

Error message saying some of library updated use newer version when trying to load pictures from a CD

Keep getting this error message when trying to load a cd of pictures from our newer MacMini onto an older MacBook. Suggestions?

What version of iPhoto on the Older MacBook?
What version of iPhoto on the newer Mini?
How did you make disk?
Regards
TD

Error message when searching for payment [FJ]

Hello,
My client is searching within (SBO2005A SP:01 PL:41) the incoming payments and gave a * in the number field. This is in combination with Add-on Financial Journals.
When you select button 'Search' the following error comes up:
FJ: Save_FJ_PaymentValues: 1). [Microsoft][ODBC SQL Server Driver][SQL Server] Syntax error convert this varchar value '*' to a column of data type int.
I couldn't find a SAP note on this but I don't think this is due to wrong use of searching criteria?!
Regards,
Petronella
Edited by: Marc Riar on Feb 14, 2008 10:11 AM

Hi Suda,
This application is from a Belgium Partner, but according to SAP NL supported by SAP?!
Regards,
Petronella

On my iTunes for Windows, I keep getting the error message, "check directory for CTDFMRES.DLL", and then the program freezes.

I'm having trouble importing an audio book.

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

System Update and RSS feeds don't work (or "no news is good news")

My Moto Droidx upgraded itself to Android 2.2 and since then, the RSS feeds I had are not showing any new entries. Checking the underlying websites shows that new entries have been made.
Any attempt to create new Moto or Andrioid RSS news widgets comes back with an error (of course it just says "error" with no number or explanation).
Has anyone else seen this? Is there some news blackout in placeIs there a fix or a way to back off Android 2.2???
Thanks.

I have provided some steps below that may help.
Step 1 – Try completing a soft reset on the device. I have provided the instruction in an article below:
Power off the device and remove the battery
http://support.vzw.com/clc/devices/knowledge_base.html?id=33747
Step 2 – Remove the widget and icon off the devices home screen and clear out the data and cache. I have provided the instruction article below:
Clear data, Clear cache (if applicable), and Clear defaults
http://support.vzw.com/clc/devices/knowledge_base.html?id=34831
Step 3 – Put the device into safe mode. Safe mode is a method that allows the device to run without non-essential applications. This is beneficial for troubleshooting 3rd party applications. I have provided the instruction in an article below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=34184
If it works correctly in safe mode, there may be a application not native to the device causing the issue

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

ICal doesn't show delegation, and generates date and time error messages in /var/log/system.log

I have a problem with my iCal, when I use my caldav account, I can only see my own calendar on my MBA, on my co-workers MBP it works fine with both my account and his. My co-worker can't see other calendars than his own when he uses iCal on my laptop.
We can reproduce this problem on his computer by setting Location to Automatic rather than Amsterdam, then after deleting iCal's cache files, the caldav account and setting the Location back to Amsterdam solves the problem for him.
It does not solve the problem for me (or several other co-workers). We've been looking at this for a few weeks, and we can not find any clear pattern why certain machines have this problem and others don't.
All machines (both affected and unaffected) are running Mac OS 10.7.2 with iCal 5.0.1
I've spoken to Apple support over the phone (in the Netherlands), unfortunately, they couldn't help with this.
So far we've tried numerous location and language settings, but on affected machines nothing appears to solve the delegation problem (which we assume to be connected to the error messages iCal generates)
Starting iCal yeilds the following error messages in /var/log/system.log:
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
              "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
          ) != (
              "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
              "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
              "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
              "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
          BEGIN:VTIMEZONE
          X-LIC-LOCATION:Europe/Amsterdam
          TZID:Europe/Amsterdam
          BEGIN:DAYLIGHT
          TZOFFSETFROM:+0100
          TZNAME:CEST
          TZOFFSETTO:+0200
          DTSTART:19700329T020000
          END:DAYLIGHT
          BEGIN:STANDARD
          TZOFFSETFROM:+0200
          TZNAME:CET
          TZOFFSETTO:+0100
          DTSTART:19701025T030000
          END:STANDARD
          END:VTIMEZONE
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
          line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
              "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
          ) != (
              "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
              "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
              "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
    "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
          BEGIN:VTIMEZONE
          X-LIC-LOCATION:Europe/Amsterdam
          TZID:Europe/Amsterdam
          BEGIN:DAYLIGHT
          TZOFFSETFROM:+0100
          TZNAME:CEST
          TZOFFSETTO:+0200
          DTSTART:19700329T020000
          END:DAYLIGHT
          BEGIN:STANDARD
          TZOFFSETFROM:+0200
          TZNAME:CET
          TZOFFSETTO:+0100
          DTSTART:19701025T030000
          END:STANDARD
          END:VTIMEZONE
And when I close iCal I get:
Jan 5 11:33:25 dhcp-91 [0x0-0x592592].com.apple.iCal[23894]: token mismatch: 4 != 5

I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Error message on searching for system updates and news feeds

Similar Messages

Maybe you are looking for