Error message on the display

I changed the ink cartridges and managed to print a copy. The message on the display then said - Pull out the paper tray. Load plain paper then press OK. Which I did.
The message now reads "Printing alignment page" However it doesnt print and the message will not cancel and I am not able to use the photo copier.
The printer works when printing from the computer but it is not allowing me to use any of buttons on the printer

Hi @Chazzie,
Welcome to the HP Forums!
I understand that you are getting an error message on your printer's display and that you cannot use any of the buttons. I am happy to look into this for you!
For further assistance, I will need some additional information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Why throws the renderengine error messages about the display?

    In our company we have built up a renderfarm with 4 PCs for AE Netrendering. On each PC is the AE Renderengine installed which watches a watchfolder. Because the PCs only have to render and not to show something they don't own a graphics card but only an onboard graphics chip with a color depth of 16. Now the renderengines throw error-messages that AE can`t be shown correctly with at least 256 colors. But this is not important for just rendering. The message stops the renderprocess of the renderengine until it is confirmed. Anybody knows how to get rid of this?
    Greets Andreas Knop

    Umm, sorry, but even the render engine uses the standard UI components and thus requires some capabilities. I'm sure that's clearly mentioned somewhere in the docs as well. You're out of luck on that one. The only thing that will work is the commandline render, obviously.
    Mylenium

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • How to display custom error message if the Required field is not entered?

    Hi,
    I have made one input field as required field in a view.
    I want to display one custom error message ,if the required input field is not entered.
    Please help me regarding this.
    Thanks,
    Deepika

    hi deepika....
    First go to message pool under webdynpro components.
    Create a new message there..of type error.
    Enter your text.
    Now to avoid null pointer exception , in wdDoInit(), initialise the value
    wdContext.currentDateTimeElement().setDate("");
    now create an action for submission of data. If field is empty, then within the button write:
      msg = wdComponentAPI.getComponent().getMessageManager();
        if(wdContext.currentDateTimeElement().getDate().equals(""))
        msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true)     ;
    between begin others put:
    regards,
    pinki
      IWDMessageManager msg = null;

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • Display error message in the status bar during PBO

    Hi All,
    I want to issue an error message on a program's selection-screen.
    The thing is when I issue an error message inside PBO, all the text in the selection-screen are gone and replaced with lines.
    So i displayed the error message in the status bar.
                      MESSAGE S074(Z4) DISPLAY LIKE 'E'.
    But the problem with this is that it will allow to continue data processing.
    What shall I do in order for my error message to behave as an error message and not as a status message?

    Hi,
    Write your message in PAI same as you have done MESSAGE S074(Z4) DISPLAY LIKE 'E'.
    after this use call screen 'your screen no'.
    it will not lock the field.

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

    I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

    I had exact same problem and I have found a way to get round out!!!! Easy!
    So the reason it doesn't allow it to play is for security to stop piracy etc.
    Plug in the cable and VGA and aux cable and get everything set up so you are looking at the home screen.
    1) select Videos
    2) selected the film you want to watch
    3) click the little play button
    4) it will then come up with the message saying it can't play protected films blah blah blah
    5) WITHOUT clicking ok double tap the home button to bring up the multitasking bar and swipe left to reveal the control panel
    6) hold fast forward for a second or two and the movie with continue to play!
    Stay in the multi tasking bar with the control panel, The message will stay there but don't worry. Kick back and enjoy your iPad movie on the big screen:)
    I'm sure your saying thanks:) it was my pleasure realising I've outsmarted apples little security protection thing lol

  • Why the validator can't display the error message on the popup dialog?

    I have input text with a validator and a custom ok button and a cancel button on the popup dialog.When I click the ok button,the validator will validator the input value on the input text,but it just close the popup dialog without display the message firstly.The point is it does validate the value but doesn't display the message.Can anybody help?

    It seems if I use the button which is associated with the dialog the validator works well,but if I use the custom button the error message doesn't display. the environment is 11g.
    the code of the page is :
    <af:form>
    <af:popup id="copyPopupDialog" contentDelivery="lazyUncached">
    <af:dialog title="validator" closeIconVisible="false" type="none">
    <af:inputText id="copyReportsetCode" styleClass="" label="code"
    value="11"
    validator="#{reportSetManagedBean.validatCode}"></af:inputText>
    <f:facet name="buttonBar">
    <af:panelGroupLayout layout="horizontal" halign="right">
    <af:commandButton text="ok"/>
    <af:commandButton text="cancel" immediate="true"/>
    </af:panelGroupLayout>
    </f:facet>
    </af:dialog>
    </af:popup>
    <af:commandButton text="commandButton 1">
    <af:showPopupBehavior popupId="copyPopupDialog"/>
    </af:commandButton>
    </af:form>
    the code of the managedbean is:
    package david;
    import javax.faces.component.UIComponent;
    import javax.faces.context.FacesContext;
    import javax.faces.validator.ValidatorException;
    import org.apache.commons.logging.Log;
    import org.apache.commons.logging.LogFactory;
    import java.util.regex.Pattern;
    import javax.faces.application.FacesMessage;
    import javax.faces.application.FacesMessage;
    import javax.faces.application.FacesMessage.Severity;
    public class ReportSetManagedBean {
    public ReportSetManagedBean() {
    public void validatCode(FacesContext facesContext, UIComponent uIComponent,
    Object object) {
    FacesMessage msg = new FacesMessage("eror");
    throw new ValidatorException(msg);
    }

  • How to display error message on the screen

    I am new to WD world and need all possible steps to resolve the following issue.
    I need to display the error message on the screen if any required field is empty when user click on SAVE button.
    I have set the attribute GO_MESSAGE_MANAGER and check the both box for  PUBLIC and REFTO and set the associated type IF_WD_MESSAGE_MANAGER under COMPONENTCONTROLLER.
    Under the method of COMPONENTCONTROLLER set the value WD_THIS-GV_NAV_FORBIDDEN = IV_NAV_FORBIDDEN. Which is type IMPORTING of associated type WDY_BOOLEAN.
    GV_NAV_FORBIDDEN has been set to attribute WDY_BOOLEAN in the COMPONENTCONTROLLER.
    Under the ACTION (on SAVE button) of my default view (VW_DEFAULT) I am doing the following.
    IF lv_f_name IS INITIAL
        CALL FUNCTION 'BALW_BAPIRETURN_GET2'
          EXPORTING
            type   = 'E'
            cl     = 'HRRCF0002'
            number = '020'
          IMPORTING
            return = ls_return.
        lv_message = ls_return-message.
    NEED TO PUT CODE TO PASS IT ON
    ENDIF.

    The thing I can not figure out is the input parameter of this call. My CONTEXT has a node1->node2->node3->f_name.
    CALL METHOD lo_message_manager->report_attribute_error_message
      EXPORTING
        message_text              = lv_message
        element                   = HOW WIILL YOU FIND THE VALUE OF THIS
        attribute_name            =
       params                    =
       msg_user_data             =
       is_permanent              = ABAP_FALSE
       scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
       msg_index                 =
       cancel_navigation         =
       is_validation_independent = ABAP_FALSE     .
    wd_comp_controller->set_navigation_forbidden( iv_nav_forbidden = abap_true ).

  • How to add an error message in the application module?

    Hi,
    I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
    How could I achieve this?
    I am using JDeveloper 10G
    Thanks

    Muhammed,
    Have you tried throwing a JboException in your AM code?
    John

  • Problem in BADI, error message not getting displayed

    Hello Experts,
    I am facing a strange problem in BADI.
    The requirement is that the user should not be allowed to change the plant field
    on the screen of standard MM transctions for PO/PR amendment.
    I have written the code in separate BADIs for PO and PR.
    I am displaying an error message if the user tries to change the field.
    For PO, it is working fine.But for PR, the same code is not working.
    The control is going over to the BADI for PR and rest of the code is working fine.
    But the error message is not getting displayed for PR amendment.
    Can anybody please suggest the possible cause of problem and some solution to it.
    Thanks in advance.

    Hi
    See the sample BADI code for PR which raises an exceptions and do accordingly
    BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
    Definition Name: ME_REQ_POSTED
    Interface Name : IF_EX_ME_REQ_POSTED
    Implementing Class: ZCL_IM_PUR_REQ
    Method :            POSTED
    METHOD if_ex_me_req_posted~posted .
      DATA : v_mtart TYPE mtart.
      DATA l_s_eban TYPE ueban.
      LOOP AT im_eban INTO l_s_eban.
        IF l_s_eban-estkz NE 'B'.
          CLEAR v_mtart.
          SELECT SINGLE  mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
          IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
            MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
          ENDIF.
        ENDIF.
        IF  l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
          IF l_s_eban-knttp NE 'A'.
            IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) 
               AND l_s_eban-matnr EQ space.
              MESSAGE e000(zm_msg) WITH 'You cannot create'
                'a PR without material number'.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDMETHOD.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Validation error message is not displayed for an attribute as an Input List Of Value

    Hi everyone,
    I use jdev 11.1.1.7.0
    In my application I've created an Entity Obj and a View Obj base Employees table.
    for the JobId attribute I've taken actions as listed below:
    1. in Employees EO I've created a validation for this attribute and in some cases an error message returns (the error message is "the salary is not high"):
         * Validation method for JobId.
        public boolean validateJobId(String jobid) {
            if (...) {
                return false;
            if (...) {
                return false;
            if (...) {
                return false;
            return true;
    2. in Employees VO  I've created a LOV for this attribute (the view accessor is JobsViewObj ) and I display the attribute as an Input Text with List Of Values.
    in jspx page I drag& drop this attribute as below:
              <af:inputListOfValues id="jobIdId"
                                    popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                    value="#{bindings.JobId.inputValue}"
                                    label="#{bindings.JobId.hints.label}"
                                    model="#{bindings.JobId.listOfValuesModel}"
                                    required="#{bindings.JobId.hints.mandatory}"
                                    columns="#{bindings.JobId.hints.displayWidth}"
                                    shortDesc="#{bindings.JobId.hints.tooltip}"
                                    autoSubmit="true">
                <f:validator binding="#{bindings.JobId.validator}"/>
              </af:inputListOfValues>
    I open the Popup and I select a row from the Popup list and then I click Ok. After that if the validation method(validateJobId) returns false, the error message("the salary is not high") must be show to the user. but the error message doesn't display. I don't understand why this happens.
    Can anybody guide me about this problem?
    Regards
    Habib

    yes, you're right, I've tested it in 12.1.3 and error message was displayed.
    it seems it's a bug(bad bug ) in both 11.1.1.7 and 12.1.2. and now what can I do? is there any way to display the the error message?
    Regards
    Habib

  • Error message in the IDOC at item level

    Hi,
    Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
    Regards,
    Sujan

    hi sivaprasath,
    write the custme code as per your requirement so that it will do..user exit or badi .
    ~linganna

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

Maybe you are looking for