Error Message on the Log in screen

Hi
Why the following message appears as soon as I enter the username and password for login in to SAP B1.
The message is :
"Module<Software Development Kit - Development Version> expired on <20080325>"
How to get rid of this message?
Thanks
SV Reddy

Hi,
Your Software Development kit - Development Version validation date may got expired.
Normally, We will get license for SAP B1. Along with SAP B1 Licenses (Professional User license) we will get license for SAP Addons, Compatibility License for Addons, Software Development Kit - Development Version or Implementation version and SDK Tools Licenses.
Goto Administration --> License --> License Administration --> Components Tab.
You can view the License details with their Expiration date particulars. In this you click the Software Development Kit - Development Version in list. You will view the related informations on right side.
To solve this problem, Renew the License of SAP with the help of your Implementation partner. They will download the license and upgrade your SAP License. Atpresent SAP has provided the license validation till 31.12.2099.
I hope this could help you.
Raja.S

Similar Messages

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

Error message in the log file

Hi,
I'm running CF 7.0.2. The app is using Flash forms.
I have this onError function in my Application.cfc.
<cffunction name="onError">
<cfargument name="Except" required="yes">
<cfargument name="EventName" type="string"
required="yes">
<cflog file="#This.Name#" type="error" text="Event Name:
#EventName#" time="yes">
<cflog file="#This.Name#" type="error" text="Messsage:
#except.message#" time="yes">
<cflocation url="errorPage.cfm" addtoken="no">
<cfabort>
</cffunction>
The app is working fine but my log file is full of errors:
Event Name: onRequestStart
Messsage: Event Handler Exception
Any idea what's wrong?
Is there any way to get more specific error message?
Thanks,
b.

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Binding dropped error messages in the log, UNABLE TO USE BT

Hey,
So I have an extreme n, and bit torrent will not connect to peers seeding. They will connect for 2 seconds then disconnect. i have ports configured correctly 9090 forwarded in the extreme too
but
the log is filled with
Binding dropped from ip xx.xxx.x.xx to (my ip)

Do you get similar errors when running a ColumnList query without providing a Table name (with the Group parameter)?
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList
/XMII/Illuminator?Server=XXXXX&Mode=ColumnList&Group=TABLENAME
Just a guess, but perhaps the WB is trying to fill the lower left listbox of available columns without the benefit of a table name being selected from the upper left listbox of available tables.
Regards,
Jeremy

Frequent postfix "master exit time has arrived" error messages in the log

I'm seeing this in my mail.log every minute:
Dec 1 12:27:46 Executor postfix/master[6394]: master exit time has arrived
Dec 1 12:27:46 Executor postfix/master[6399]: daemon started -- version 2.5.5, configuration /etc/postfix
Dec 1 12:28:46 Executor postfix/master[6399]: master exit time has arrived
Dec 1 12:28:46 Executor postfix/master[6406]: daemon started -- version 2.5.5, configuration /etc/postfix
Dec 1 12:29:46 Executor postfix/master[6406]: master exit time has arrived
Dec 1 12:29:46 Executor postfix/master[6409]: daemon started -- version 2.5.5, configuration /etc/postfix
This does not seem to be normal behavior. Is something misconfigured here? How can I fix this?

just experienced this and found your thread while looking for an answer.
do you have any thing in /var/spool/postfix/maildrop ? if there is something there, then launchd will keep launching postfix.
(ls /var/spool/postfix/maildrop)
i had a file there, and the permissions were wrong for it to process. so it kept launching, but never was able to clear the folder.
i did a chmod 775 on that document ( something like: sudo chmod 755 /var/spool/postfix/maildrop/* ), and that has fixed it after years of issues.
i'm not sure it's the best answer, but worked for me.
Message was edited by: neuralstatic
btw, i had tried to disable the launchd entry for it, but that was no help.

Detect error message on the screen

How do I detect error message on the windows 2000 screen? I need to detect any error message appearing on the screen
Thank you,
Jeff

You mean any kind of message generated by any kind of program, whether Java or not?

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Need to find the way to get the actual error message in the alert log.

Hi,
I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
============================
Target Name=IDMPRD
Target type=Database Instance
Host=oidmprd01.ho.abc.com
Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
Message=1 distinct types of ORA- errors have been found in the alert log.
Metric=Generic Alert Log Error Status
Metric value=1
Severity=Warning
Acknowledged=No
Notification Rule Name=RULE_4_PROD_DATABASES
Notification Rule Owner=SYSMAN
============================
Is there any way to get the complete error details in the OEM alert itself.
Regards
DBA.

You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

Can we show custom error message if the user fail to log in MII system.

Hi,
Is it possible to show a custom error message when a log in is failed because of access restrictions?
I am using xMII version 11.5
Thanks
Regards,
Neha Maheshwari

Since you are on 11.5, it is possible to make edits to some of the system jsp pages, etc. but it would NOT be my recommendation to do so. Since the NetWeaver versions for MII 12.0 and beyond use UME for the login instead of the LHSecurity engine, this would be a very short term change.
What specific changes would you like to make, the login page messages, query result messages, applet messages?

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

My iphone 4 has an error message on the screen that reads "iphone disabled connect to itunes" what do i do

My iPhone 4 has an error message on the screen that reads "iiPhone disabled connect to iTunes" I've tried connecting and can't get anywhere what do I do and what is the problem?

Your phone is disabled for some reason. Maybe you entered the wrong Passcode too many times. In any case you need to do just as the phone is instructing you to do. Start the latest version of atones on your computer and connect your phone. iTunes should guide you through the process of getting your phone working again. Here's a link to an Apple support page on this:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

. I have an iCloud error message on the screen.

The screen on my iPad is frozen. The hard reset does not reboot the iPad. I have an iCloud error message on the screen. That I can't get rid of.

Thank you. I had tried this before with no success. However, I tried it again. The problem is I don't know who to reboot without a keyboard. I can't get to the on screen key board with the screen locked up.
The error message I get is " iCloud Backup This iPad hasn't been backed up in 2 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi" at the bottom of the message is an OK button.
Now with the iPad removed from the keyboard:the screen will stay lit for about 5 seconds and then go blank. Turning power off and on brings up a blank screen with the iCloud message and the slide to unlock. Touching the OK button causes a brief flutter of the button. Trying to slide the slide to unlock accomplishes nothing, since it won't slide.
The battery was at 49% when the problem occurred. I have since recharged the battery to 100%. I tried earlier to reboot with the iPad connected to AC.
Again, thank you for your suggestions.

Error Message on the Log in screen

Similar Messages

Maybe you are looking for