Error message on Windows 2003 and Satellite M40x-184

hi
my laptop is Satellite M40x-184
with Os Xp Home edition
I want to insatall a second Os which is Windows 2003
but while installing it, happend a problem and the gives me a blue screen with this message:
'hardware malfunction nmi parity check / memory parity error the system has halted'
Please tell me how i can install 2 Os xp home edition and Windows 2003
thanks

Hi
This error message can occur if a hardware component malfunctions, or if there are damaged or incompatible drivers installed.
To solve this problem remove any extra memory modules that are in the computer, leaving only the least amount that is required for the computer to start and run Windows. Restart the computer to see whether the error messages persist.
This issue was described on the Microsoft website.
Please check this site:
http://support.microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

Similar Messages

Windows XP and Satellite M40X - programs are crashing

Hi, I recently purchased the satellite m40x from Germany. The windows was in German hence after coming back to India, I tried to install the University Licensed version of Windows XP on it.
I have tried many versions of windows with and without service packs but the problem remains that with many applications like Yahoo! Messenger 7 and Nero Start Smart and Age of empires and many others .. the programs crash. I am not able to understand the reason behind this. With the german windows all these programs were working.
after the installations the program works but after restarting the computer it starts giving error. Some of the older messenger versions are working But no version of nero is not working.
Please help me .. thanks
[Edited by: admin on 17-Aug-05 17:43]

I tried to install it with the installation instructions but could not get the following packages
acrobat reader V6.0.1_6.0.2_BASIC
dla V4.95BUILD490B69B
smc fir driver FIR\V5.1.3600.5_R101(LOGO)
record now V7.22BUILD720B80E
sun java 2 runtime environment V1.5.0
I am still getting the same errors with Yahoo Mnessenger 7 and Nero after complete installation.
Toshiba Asia cannot provide any support because this model has not been launched in India as yet.
Please help.

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Import image iso of Window 2003 and 2008R2 Server Error

Dear All,
I have tries many times to import Window 2003 and 2008R2 image iso from Oracle VM Server 2.2.0 to Oracle VM Manager 2.2.0, it always shows status error in Oracle VM Manager.
Please help to give advice and solution.
Thanks,
Best regards,
Heng

... After checking: I cannot delete my posts either.
I can see some sort of button "Actions" at the bottom of my replies, but it seems to be missing from a 'main' post. You may want to ask this in the Forum About Forums: Forum comments

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

Error message in excel 2003 : compile error in hidden module could be caused by Adobe Acroate add in

The error message in excel 2003 : "compile error in hidden module AutoExecNew" could be caused by Adobe Acroate add ins, thats waht microsoft told me.I use windows xp service pack3.I have got reader newest version and photoshop 6.0. With this and also with an older reader version I got the error message when opening excel. what can I do?
Best regards Ray

If you have Adobe Reader, you (probably) don't have Adobe Acrobat, a
commercial ($$) product. 5.0 is a very old release.
But you can check if the files are there anyway from long ago. See
http://support.microsoft.com/kb/307410
Aandi Inston

On 6u13, new plug-in fails to load on Windows 2003 and IE7

I'm attempting to load an applet in IE7 with an OBJECT tag in Windows 2003. This is a mature product that has, for this release, moved from 5 to 6. The CLSID was changed from the CAFEEFAC one for any version of 5 to the one for any version of 6. Java 5 version worked fine on Windows 2003. Now, on some, but not all, of our 2003 systems the ActiveX control for the new Java Plug-in fails to load.
These configurations work:
- Windows XP and any Java and any IE
- Windows 2003 and Java5 and any IE
- Windows 2003 and Java6, old plug-in, and any IE
- Windows 2003 and Java6 and APPLET tag and any IE
This one doesn't...on some machines:
- Windows 2003 and Java6, new plug-in, IE7, OBJECT tag
This is not a security problem. If I turn off the new style plug-in in the control panel, it works. However, I'd really like to avoid doing this, as the new plug-in has much needed features. Also, the APPLET tag works where the OBJECT tag doesn't. I can implement this change if needed, but it would be fairly painful and I'd prefer to avoid it.
Does anyone know why this might be happening? Is there a good way for me to diagnose this? The browser is quite silent as to what the error might be.
I appreciate any help. This one is truly vexing me!

Okay, I'm wrong...I thought I could move to APPLET tags...I cannot. LiveConnect from JavaScript to Java does not support APPLET tags, only OBJECT tags. This makes my problem worse, as I don't have any recourse so far, except to disable the new plugin.
However, this did lead to a clue: disabling the new plugin caused it to work again. When the new plugin was re-enabled to see it fail again, much to my surprise, it worked! Does anyone know what flipping that option actually does? Registry change or something else?

ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3. I tried ADE 4 but no better. I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient. Does anybody know what's wrong? Thanks.

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

When i try to install i tunes i get error message 7 windows error message 126

When i try to install i tunes i get error message 7 windows error message 126

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304)

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Remote desktop connection limit in windows 2003 administration as well as in the mixed environment of windows 2003 and 2008 servers

RDP protocol i.e. Remote desktop connection is configured to perfrom and manage software administration of ORACLE application and database servers which runs on windows 2003 server. Two sessions are allowed on each of these servers for database
administrators. The question is:
a) if network administrators who perform window server administration (50+) are included in
2 sessions limit or do they manage all these servers through Console Session which is separate from the remote desktop connection limits of 2 sessions.
b) How is the 2 sessions limit prescribed by microsoft (more of a licensing limit) handled in the mix environment of windows 2003 and 2008 server where all these servers are managed on the VMWARE?
avnish sharma

Hi Avnish,
Thank you for posting in Windows Server Forum.
By default any windows server will provide 2 remote session for administration purpose only. No matter which administrator is accessing that server. If you will connect the console session then 3.One server is accessed by 3 Session (console + Remote +
Remote). When the particular server reached this limit then any working administrator will receive a message to log out as other user trying to access the session or if we had provided the setting then new user is restricted to login.
If you want more than 2 remote desktop session than you need to purchase TS\RDS CAL, install TS\RD Licensing role, activate it first and then configure CAL on it. There are 2 types of CAL available (USER & DEVICE). You can purchase CAL according to your
company requirements.
Hope it helps to understand!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error message on Windows 2003 and Satellite M40x-184

Similar Messages

Maybe you are looking for