Error Message on WLC5508 'Validation of STAT_PAYLOAD failed'

Hi,
Upon checking the logs, I'm seeing a lot of these messages;
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP  00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join.
Anyone know what this means? The output interpreter/message decoder isn't much help.
5508 Controller running ver 7.3.101.0.
Cheers,
Dan

Also seeing...
*spamApTask6: Oct 25 14:19:58.547: #LWAPP-3-VALIDATE_ERR: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP  00:3a:98:09:4e:d0
and
*Dot1x_NW_MsgTask_0: Oct 25 14:17:01.149: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP  00:3a:98:09:4e:d0
All refer to the same MAC above.
Also I noticed in the traps that the RADIUS server is flipping to the backup every few minutes after the 'live' one doesn't respond in a timely manner....
Thu Oct 25 14:29:55 2012
RADIUS server 10.2.100.50:1646 activated on WLAN 2
33
Thu Oct 25 14:29:55 2012
RADIUS server 10.15.5.100:1646 deactivated on WLAN 2
34
Thu Oct 25 14:29:55 2012
RADIUS server 10.15.5.100:1646 failed to respond to request (ID 195) for client 00:21:6a:4c:6a:e0 / user 'KIE\NDaly'
35
Thu Oct 25 14:29:47 2012
RADIUS server 10.15.5.100:1646 activated on WLAN 2
36
Thu Oct 25 14:29:47 2012
RADIUS server 10.2.100.50:1646 deactivated on WLAN 2
37
Thu Oct 25 14:29:47 2012
RADIUS server 10.2.100.50:1646 failed to respond to request (ID 58) for client 00:21:6a:4c:6a:e0 / user 'KIE\NDaly'
Checking for network issues between the WLC and ACS now....

Similar Messages

  • Version 31.3, error in upadting RSS feeds. Error Message - not a valid feed.

    After upgrading to version 31.3, error in updating RSS feeds.
    Error message - not a valid feed.
    Unable to Attach screen shot of feed validator results

    The answer is in the guide, please read it carefully:
    https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
    You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so.

  • After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • QAAWS error message "not a valid query"

    Hi,
    When I'm trying to connect to QAAWS I get this error message: "not a valid query. FWB 00025".
    Does anyone know how to solve this problem?
    The server where the BOE is installed on has been restarted a couple of times but it doesn't help.
    Universe Designer and WebI work fine.
    Thanks!

    Is QaaWs running properly on your system?
    To validate the installation, open a browser and type the following URL
    http://[server]:[port]/dswsbobje, where [server] corresponds to
    your web server address and [port] corresponds to the port where you
    set up in your web server. The default used by Tomcat is 8080. dswsbobje
    is the default name of the Web Service provider web application. Then Validate.

  • Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

  • HT1349 itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    Hello cynthialane,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best of luck,
    Mario

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    See if this post by turingtest2 fixes it : key not valid for use in specified state

  • I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with d

    I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome

    Export the photos to a desktop folder, right click on the folder and burn to disk - see if that is any different
    LN

  • Error message: The request for account "iCloud" failed.  The server responded with "400" to operation CalDAVUpdateShareesQueuableOperation.

    I created a new public iCAL. Trying to send invitations to join and am receiving this error message:
    The request for account “iCloud” failed.
    The server responded with
    “400”
    to operation CalDAVUpdateShareesQueuableOperation.
    Tried copying the URL link provided for the Calendar into a MailChimp announcement.  Not working.
    I've tried the uncheck calendar method on iCLOUD and re-checking to stop the pop-up message.
    Is this perhaps because they don't have an iCLOUD account? If they have iTUNES, shouldn't it work?
    Appreciate any help. 

    Try this first:
    In iCal Preferences…, choose Accounts, then select the account that is giving you trouble. Uncheck the box labeled Enable this account. Wait a few seconds, then re-check the box. This should solve the problem.

  • LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

    LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

    Am 15.08.2014 14:03, schrieb dj_paige:
    >
          LR 5 two installation. Dektop and Notebook. Notebook changed. LR
          5 license deleted. New Notebook, new installation LR 5. Error
          Message, Key not valid at this status.
    created by dj_paige <https://forums.adobe.com/people/dj_paige> in
    /Photoshop Lightroom/ - View the full discussion
    <https://forums.adobe.com/message/6642924#6642924>

  • Trying to download itunes i get error message"key not valid in specified date"?

    I am trying to download Itunes and get the error message " key not valid in specified date"?

    You need to deal with Adobe Customer support.  This is a  Photoshop User forum the is also one for LR may be some on over there has encountered you problem Photoshop Lightroom

  • Using ADF BC I wnat to customize error message when entity validation fails

    Hi,
    I am using ADF BC for model.JSF for view-controller
    I want that when entity level validation fails during update of record the error massage should be generate accourding to the values inputed by the user.
    how can i add programatically generated error message.
    Please if possible provide some example.
    Thanks
    ajit

    Try this:
    http://download-west.oracle.com/docs/pdf/B25947_01.pdf
    9.3.3 How to Create an Entity-Level Method Validator

  • Detailed error messages from jaxb validation

    Hi,
    I am developing an application that uses jaxb. When I validate an XML documenmt I am creating using the generated code, and validate the object the error message I get is not very detailed.
    I have a type that containes three elements. One of the elements is an enumeration. If i put an invalid value into that element in the type, and validate, the validation says :
    javax.xml.bind.ValidationException - with linked exception: [com.sun.xml.bind.serializer.AbortSerializationException: the value is not a member of the enumeration.]
    It does not mention the element name, or the possible values of the enumration or the value set.
    If I validate in oxygen XML or another tool it tells me the name of the element and possible values.
    How do I do this in my code?
    I have already made my own validator from a copy of DefaultValidationHandler and run that, but in that code I only get a handle to the top level complexType.
    How do I get the information about which child element relates to the error message? Or is there another strategy to get this info ?
    Thanks
    Paul.

    I am one of the many getting this error. In my case I am trying to connect to my wife. She is on a brand new intel macbook. I am on a iMac G5. My error message is below and doesn't seem to have the same issues referenced by the earlier user. Thoughts?
    Video Conference Error Report:
    24.600844 @:0 type=4 (00000000/2)
    [VCSIP_INVITEERROR]
    [19]
    24.600695 @SIP/SIP.c:2437 type=4 (900A0015/2)
    [SIPConnectIPPort failed]
    Video Conference Support Report:
    24.101248 @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.15.100;branch=z9hG4bK26fc92013a67f90a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=832276631
    Call-ID: 39f2e40a-16bf-11db-8b4f-d21f408913c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 532
    v=0
    o=graeme_hepworth 0 0 IN IP4 192.168.15.100
    s=[email protected]
    c=IN IP4 192.168.15.100
    b=AS:2147483647
    t=0 0
    a=hwi:784:1:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:YES
    m=audio 16386 RTP/AVP 12 3 0
    a=rtcp:16387
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:-1207316380
    m=video 16384 RTP/AVP 126 34
    a=rtcp:16385
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:320:240:320:240
    a=rtpID:1258096851
    ]

  • Error message 'not a valid PDF document'

    Hi folks,
    my Z10 has trouble opening some PDF documents sent as email attachment. When I try to open them the error message appears:
    Important message
    The document cannot be opened because it is not a valid PDF document
    There is no BES10 Service involved in my environment. Mails are synced with with active sync.
    OS Version: 10.2.0.429
    Any suggestion appreciated.
    Best regards,
    RAUMPATROUILLE

    Stuffit is the only app I know of which can decompress its own format. Your Windows clients must use the free Expander to open them. Otherwise, use OS X's built in zip compression and they'll be able to open the files without the need of third party software. Right click on any item, or group of items and choose, "Compress xxx Items" (how it will read if more than one item is chosen).

Maybe you are looking for

  • I have trouble with swing tutorial demos

    I 'm trying swing tutorial. I already have downloaded the IconDemo in zip format. Compilation and execution are Ok but the application hasn't show anyimage. I have done with other appplication about Icon image, and it occur the same. Can anybody help

  • EDI-IDOC: want to generate Reference Specifications for Bank Details field

    Hi Guru,        We are running to the situation that we use EDI with China vendor (using China bank account). The bank account for China has greater than 18 characters which is the maximum limit for bank account field. Based on note 96624, we are sug

  • Problem with open forms.... urgent

    guys, i am trying to open a form using the open_form with a new session and activate mode......one more thing i am trying to deploy these forms on the web. when try to open the form, the cursor keeps switching between the to forms..........i need pre

  • Wraptor DCP and 5.1

    I have used Wraptor to create a DCP. The vision is fine but the 5.1 is being a pain. I put the .wav tracks into PP in the order: 1 - L, 2 - R, 3 - C. 4 - LFE, 5 - Ls, 6 - Rs. I checked the 5.1 in the export dialogue and got something strange. Using A

  • How to extract channels names from PhotoShop-written TIFFs?

    Hi, Does anybody know how to extract channel names from PhotoShop-written TIFFs? (I'm really asking about spot color channel names, as basic channel names, such as "Red," "Green," "Blue" or "Cyan," "Magenta," "Yellow," and "Black" can obviously be de