Error message opening CS2 brushes in CS6?

I make brushes that I sell and I have some freebies. I make the brushes on CS2 so that they will be compatible with more versions. I will now and again get a message from a client that says their brush doesn't work in CS6 or CC. I don't have any problems running my brushes in CC and most of my clients seem to have no problems, so what might occasionally give someone a problem using brushes that should be compatible? Note: I don't discount that it may be user errors - trying to load the pngs instead of the .abr, etc., but in case there is some other issue I'm not aware of. Thanks!
Thanks for your help.

Since installing XP SP3 in addition to being unable to open Pagemaker 7 files in Indesign CS I now find I cannot open Indesign again if I close it. I have to reboot XP for a fresh start.
Also Illustrator CS opens only to present a box "Could not complete operation" and then closes. There are no problems then in opening it a second time, except it takes the usual significant time to start.
Are these symptoms of the same problem with SP3 and the Adobe software. It is disappointing to see people say neither Adobe or Redmond are at all interested.
John

Similar Messages

  • Error message whe trying to download CS6 "Following disk cant be opened MasterCollection_CS6_illegal

    Error message whe trying to download CS6 "Following disk cant be opened MasterCollection_CS6_illegal

    And excactly on what system? Sounds like the "illegal seek" message on Mac. If so, download again using another browser.
    Mylenium

  • What does the error message "Opening file in iCloud(state=5) mean?

    I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time.  Both devices are synchronized with my PC using Wi-Fi.  The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4).  Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems.  What does this error message mean, and is there a cure for the problem?

    OK found a solution!
    It is really lame!
    NEVER add a reminder in iCal dragging them into the Week or Day view!!!
    Change to Month view and then drag the reminder on the desired day!
    You can now change to Week or Day view and move the reminder to the selected hours.
    Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
    Thank you

  • Error message: missing file  MSVCP110dll in CS6. Happens when I go from  LR5 to CS6 [was: help]

    error message missing file  MSVCP110dll in CS6. happens when i go from  LR5 to CS6

    reinstall your NIK collection:
    https://support.google.com/nikcollection/answer/3528247?hl=en&ref_topic=3001406

  • Error message opening large project

    Error message opening a large project (600MB) on some stations. (Mac)
    [/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/dvamediatypes/project/mac/../../src/ TickTime.cpp-207]
    Projects open correctly after dismissing message 8 times. Events console shows 8 x "An input contract violation has occured!"
    Surprisingly, the project opens without error message on one station only. All other stations (same os, same version, Gpus or not) display the error message.

    >input contract violation
    That MAY be a permissions issue (over on the Windows side, a "sometimes" fix is to right click the program icon and select "Run as Administrator" from the option pop-up
    One the Mac side... ?
    Mac and Root User http://forums.adobe.com/thread/879931
    -and http://forums.adobe.com/thread/940869?tstart=0
    or
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

  • Error Message Opening PageMaker file in InDesign CS2

    I'm using Windows Vista with Adobe CS2, the educational version.
    When I try to open any previous Pagemaker files 6.5 and earlier, I get an error message that says the Pagemaker file is seriously damaged and cannot be opened. It happens with all PageMaker files I try to open.
    This is a new HP computer and I used to have PageMaker 6.5 and InDesign CS 1.5 working fine on the old computer. Do I have to have PageMaker installed on this computer? I've tried clicking on the file to open it and from Indesign with file open. Any ideas?!

    Since installing XP SP3 in addition to being unable to open Pagemaker 7 files in Indesign CS I now find I cannot open Indesign again if I close it. I have to reboot XP for a fresh start.
    Also Illustrator CS opens only to present a box "Could not complete operation" and then closes. There are no problems then in opening it a second time, except it takes the usual significant time to start.
    Are these symptoms of the same problem with SP3 and the Adobe software. It is disappointing to see people say neither Adobe or Redmond are at all interested.
    John

  • Error message opening secure PDF file

    I bought a secure water marked PDF file and am unable to open it on my computer.  I get an error message saying, " There was an error processing a page.  Wrong operand type."  I'm able to download the file and open it on my Android cell phone, but if I copy the same file to my computer or download it directly from the website I get this error message when I try to open it.  I tried uninstalling and reinstalling Acrobat reader, but I still get this same problem.  Does anyone have any idea of how to fix this?  I can open other PDF files, just not that one.  I even tried using the repair Adobe reader menu option and still get the same problem.

    Sounds like pdf file is corrupt. Reader on your computer may be less tolerant of corrupt pdf files, since a corrupt pdf file can be used as a vector for a virus or malware attack.

  • Error message when trying to download CS6 to upgrade my CS4

    I just purchased Cloud so that I could update my Photoshop CS4 to CS6.  When I run the download I get the error message that Adobe Bridge is running and I need to close the application.  It is currently not running.  Do I need to uninstall CS4 before I download CS6, or why am i getting the error message about Bridge.exe?

    Terminate the process:
    Working with your Operating System’s Tools
    Mylenium

  • Error message opening .jpg saved for Web in Photoshop CS3

    After I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
    Thank you,
    Marilyn

    When I go to "Save," I select "Settings" "Other," which brings up the "Output Settings" and under the XHTML settings, I do not have "Include XMP" selected. I had to deselect "Include Comments" under "Coding". This fixed it, but it then said it was HTML and not XHTML. So I went back in and reselected "Include Comments" and resaved it for Web & Devices. No more error message!
    Thanks for your help! This was really bugging me.
    Marilyn

  • Error message opening PS CS3 Extended : "Licensing for this product has stopped working"

    I used Migration Assistant to transfer data from my (very) old Mac OS X to a new iMac OS X Yosemite. Before doing so, I uninstalled my (also very old) PS CS3 Extended. When I tried to open PS on the new Mac it asked me to download Java, which I did. But now when trying to open PS again the error message is "Licensing for this product has stopped working". I purchased it about 5 years ago in a box which I no longer have, but I do have the complete 24 digit serial number. How best do I remedy this?

    Download the Photoshop CS3 installer Max or PC here. You should be good to go.
    Download CS3 products

  • Image Processor Errors (Message #1344) - CS2 & 3

    Just started having this issue. Basically the machine tells me: SORRY, I could not process the following file: (file location/file name).
    I have searched the forums and found nothing which would help.
    As of last Thursday (3/12/09) the processor worked fine. Since the problem began I HAVE been able to re-process a jpg file (previously converted from NEF) but it will NOT handle tiffs, psd or nef format. This is true of both CS2 and & CS3.
    Early in the process I got a message asking if I wanted more information about the error and it gave me a small window saying it was error message #1344. I have not been able to find information about that error number.
    I have re-installed CS3 but this has not made any difference.
    Thank you now for any suggestions.
    Macbook - 2ghz Intel Core 2 Duo
    OS 10.4.11
    3 GB 667MHZ RAM
    Memory set at 70%.

    It means that your old account is corrupt.
    You could start by running Disk Warrior and Repairing Permissions.
    Then try doing an Archive & Install followed by updating to the current OSX version by using the COMBO updater (you can download that from Apple).
    Then try pulling the whole Prefs. folder out of your old Account and letting new Prefs form themselves for everything and only add back any old prefs that you find that you really need.
    Lots of luck

  • Error message opening iDVD project

    Need some help figuring this out. I have completed my first DVD project. It is a simple slideshow of a recent trip. I made an image yesterday and it played OK and its 625 MG.
    I decided to burn it to my LaCie external burner today, but I can't even open the project. I get the following message: Connection Failed: This file server is running on your machine. Please access the volumes and files locally.
    I've tried opening the project by clicking on it or through iDVD and get the same results. I've restarted my Mac. I've always been able to open the project previously as I worked on it.
    Your advice to solve this problem would be invaluable. Thanks!

    Where are your images stored? Where is the iDVD project stored? How does a 'file server' come into play? What is on the network?
    I think you've hit on the problem if I'm understanding. The images and the project are stored on my computer. However, when I first tried burning this project about a month ago, I had an error message (can't recall what it was). I decided after that incident that my processor was too slow (700 MHz Power PC G4).
    I decided I would use our iMacG5 which has a faster burner so I used our network to transfer the project to the iMac from my eMac. The image I had created played well but I started having problems when I wanted to open the project and burn the DVD. For one thing, the iMac only has iDVD 4. I could see that this wasn't going to work so I went back to the eMac.
    Is there any way to salvage all my work. I really don't want to start over.
    When you create an iDVD 6 project, the assets you used remain in their original location - if ANYTHING changes , you have a problem.
    The photos I used are still in iPhoto and the original project is still on my hard drive. Do you need any other information?

  • Getting error- Cannot open as archive for CS6 Master suite collection. How to d/l & install?

    I have an account and a license key code. I purchased a new laptop that doesn't have a dvd drive. I want to download CS6 Master Suite Collection but I keep getting error "cannot open as archive"!!! I have already located the d/l files, but they will NOT install. Does anyone know how to get around this problem?

    if you downloaded an exe and 7z, they should both be in the same folder and click (or double click) the exe.
    do NOT manually try to extract the 7z file.
    if that doesn't solve your problem, what file names and extensions did you download and what are their file sizes?

  • Help with error message opening lightroom 5 on macbook?

    I downloaded lightroom 5 on my macbook. i have os-lion. When I open the program and error message appears  saying " error switching modules". I am missing all the options to import photos. When I try to click on lightroom preferences at the top of the screen nothing pops up.  It seems like i am missing some of the options and the navigation pane. Do i need to update something else to be able to import photos and click between module pages?

    55AB,
    It appears the error message you have is an ink system failure error message. While it looks like your printer needs to be services there is also a thread with some suggestions out there with some results for this same issue. I have linked this thread this post. You will want to look at message 16 and 17 for what seems to be a resolution for your same printer. Hope this helps.
    http://h30434.www3.hp.com/t5/Other-Printing-Questions/error-message-0xc19a0035-quot-ink-system-failu...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Error message opening itunes

    I get the following error message when I attempt to open itunes on my computer: The MSIEXEC.EXE file is linked to missing export MSI.DLL:222
    Does anyone have a clue how to resolve this issue? Do I have any alternatives to another download? Lastly, Should I be able to access the itunes store without being able to open itunes on my computer (and if so, how?)?
    Thanks!

    YAY!!!! After doing some more research, I found a discussion that answered my question and WORKED!!
    If anyone else is having the problem I did reveiw the following post towards the bottom by The Mimico Kid and your problem should be solved. I tried just about EVERYTHING to fix the problem and nothing was working, but this did:
    http://discussions.apple.com/thread.jspa?threadID=1080311

Maybe you are looking for