Error message opening cs4

When opening cs$ on windows vista 64 bit I receive the following message
"there is no disk in the drive please insert a disk into drive \device\harddisl\dr7"
i click cancel
and receive this message" couldn't open the edit log PS edit log is disabled"
I click ok and everything seems to work just fine. What is going on?
Thanks
Roger Lieberman

Look in Photoshop Edit > Preferences > General and check what directory is nominated for the History Log.
Make sure the folder is on a local drive or uncheck the option altogether.

Similar Messages

"Unable to check out" error message in CS4

I have InDesign CS4, but do not have InCopy. When I exported an InDesign CS4 file to CS3 interchange format, and then tried to edit the orginal file, I got an error message saying: "Unable to check out this file. It may be in use by someone else." From reading the documentation, it appears that I inadvertently engaged a feature of InCopy, but when I go to the Edit->InCopy menu, the option to check the file back in is greyed out. How do I check the file back in so that I can edit it?

I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.

What does the error message "Opening file in iCloud(state=5) mean?

I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time. Both devices are synchronized with my PC using Wi-Fi. The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4). Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems. What does this error message mean, and is there a cure for the problem?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

Error message opening large project

Error message opening a large project (600MB) on some stations. (Mac)
[/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/dvamediatypes/project/mac/../../src/ TickTime.cpp-207]
Projects open correctly after dismissing message 8 times. Events console shows 8 x "An input contract violation has occured!"
Surprisingly, the project opens without error message on one station only. All other stations (same os, same version, Gpus or not) display the error message.

>input contract violation
That MAY be a permissions issue (over on the Windows side, a "sometimes" fix is to right click the program icon and select "Run as Administrator" from the option pop-up
One the Mac side... ?
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
or
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

Program error message - Photoshop CS4 for Mac

I started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same thing. I read up a little about how to fix it but I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.) Any ideas? I'm not sure what to do!
More info:
It's a psd file.
There are only 2 layers on the files, one is a vector smart image.
I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
Thanks in advance.

Hi,
I have this same problem. I use Font Agent Pro and I only have about 50-ish foundry fonts activated. I'm wondering if anyone else has found a fix? The second I open Photoshop I get an error message and I have to force quit, let's not even begin thinking about opening a file.
I'm on OSX 10.6.8, running CS4. This is getting frustrating. I'm considering reinstalling the whole suite, there goes my entire evening.

Editingutils.js error message dreamweaver cs4

I keep getting this the attached error message using Dreamweaver CS4, spry framework utilizing a number of spry widgets.
CollapsiblePanels
Spry Forms Widgets
I have made changes to the span id names associated with each of the form widgets.
I've reviewed this link http://kb2.adobe.com/cps/401/kb401257.html
However the files described do not contain the following lines and changes
Edit SpryTabbedPanelsDesignTime.js and make the following changes:
THIS DOES NOT EXIST IN THE FILE IN CS4
Go to line 188. Change:
eval("opts = " + args[ 1 ]);
to:
try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
Save the file.
Edit SpryCollapsiblePanelDesignTime.js and make the following changes:
THIS DOES NOT EXIST IN THE FILE IN CS4
Go to line 188. Change:
eval("opts = " + args[ 1 ]);
to:
try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
Save the file.
Launch Dreamweaver and verify that you can now load your file.
Any other solutions?

I have resolved the editingutils.js by breaking up the forms, but it is not the solution I'm really looking for.
Each of the 6 forms on seperate pages are 450 lines of code.
Form sample.
http://irexs.com/betatest001/can/listCANCommercial.cfmhttp://www.irexs.com/betatest001/
I want to be able to have multiple forms on one page, nested in spry collapsible panels.
I'm using DW CS4 and Coldfusion 8 server, forms utilize SPRY form fields (not cfforms).
In order to reslove the editingutils.js I had to break up the forms, but have considered an alternate solution.
In each panel the forms are nested via cfinculdes; structure as follows.
<div col panel>
     <div col panel content>
          <form spry fields>
               <cfincludes location form file>
               <cfincludes details form file>
          <form end>
     <dev col panel content ent>
<div col panel end>
WHAT I WANT TO ACCOMPLISH is as follows.
Sample page
http://irexs.com/betatest001/can/listCAN.cfm
Forms are to be inserted in the panel content section as described above.
ISSUES ARE:
I have limited JavaScript knowledge.
For the forms to work i require the the panels in closed state at page load: This is done.
ON FORM SUBMIT, I need the panel to stay OPEN, when client side or server side submit requires correction to the form.
What happens now is the page refreshes and the panel closes: the default state.
SOLUTION DESIRED, is to have the selected panel to stay open and the input information to remain when form is submitted.
Thanks for any help.

Error message opening secure PDF file

I bought a secure water marked PDF file and am unable to open it on my computer. I get an error message saying, " There was an error processing a page. Wrong operand type." I'm able to download the file and open it on my Android cell phone, but if I copy the same file to my computer or download it directly from the website I get this error message when I try to open it. I tried uninstalling and reinstalling Acrobat reader, but I still get this same problem. Does anyone have any idea of how to fix this? I can open other PDF files, just not that one. I even tried using the repair Adobe reader menu option and still get the same problem.

Sounds like pdf file is corrupt. Reader on your computer may be less tolerant of corrupt pdf files, since a corrupt pdf file can be used as a vector for a virus or malware attack.

Error message photoshop cs4 need help with

I get this message when in view of pdf open - how do I do what it says to do win7 pc
TIA

There's not much you can do about that message. Depending on how much video card memory you have and the resolution of your monitor you'll only be able to open a limited number of windows and still have OpenGL acceleration. You'll have to either lower the resolution of your monitor (not recommended), buy a video card with more memory (i doubt it'll help a lot when dealing PDF's with a ton of pages), upgrade to Photoshop CS5 (it slightly sidesteps this issue) or just live with that limitation.
Also, that's not an error message, it's just a warning telling you that you won't be able to use the OpenGL features on more than 25 (in your case) windows/documents at a time.

Error message opening .jpg saved for Web in Photoshop CS3

After I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
Thank you,
Marilyn

When I go to "Save," I select "Settings" "Other," which brings up the "Output Settings" and under the XHTML settings, I do not have "Include XMP" selected. I had to deselect "Include Comments" under "Coding". This fixed it, but it then said it was HTML and not XHTML. So I went back in and reselected "Include Comments" and resaved it for Web & Devices. No more error message!
Thanks for your help! This was really bugging me.
Marilyn

Error message opening PS CS3 Extended : "Licensing for this product has stopped working"

I used Migration Assistant to transfer data from my (very) old Mac OS X to a new iMac OS X Yosemite. Before doing so, I uninstalled my (also very old) PS CS3 Extended. When I tried to open PS on the new Mac it asked me to download Java, which I did. But now when trying to open PS again the error message is "Licensing for this product has stopped working". I purchased it about 5 years ago in a box which I no longer have, but I do have the complete 24 digit serial number. How best do I remedy this?

Download the Photoshop CS3 installer Max or PC here. You should be good to go.
Download CS3 products

Error Message Opening PageMaker file in InDesign CS2

I'm using Windows Vista with Adobe CS2, the educational version.
When I try to open any previous Pagemaker files 6.5 and earlier, I get an error message that says the Pagemaker file is seriously damaged and cannot be opened. It happens with all PageMaker files I try to open.
This is a new HP computer and I used to have PageMaker 6.5 and InDesign CS 1.5 working fine on the old computer. Do I have to have PageMaker installed on this computer? I've tried clicking on the file to open it and from Indesign with file open. Any ideas?!

Since installing XP SP3 in addition to being unable to open Pagemaker 7 files in Indesign CS I now find I cannot open Indesign again if I close it. I have to reboot XP for a fresh start.
Also Illustrator CS opens only to present a box "Could not complete operation" and then closes. There are no problems then in opening it a second time, except it takes the usual significant time to start.
Are these symptoms of the same problem with SP3 and the Adobe software. It is disappointing to see people say neither Adobe or Redmond are at all interested.
John

Error message opening iDVD project

Need some help figuring this out. I have completed my first DVD project. It is a simple slideshow of a recent trip. I made an image yesterday and it played OK and its 625 MG.
I decided to burn it to my LaCie external burner today, but I can't even open the project. I get the following message: Connection Failed: This file server is running on your machine. Please access the volumes and files locally.
I've tried opening the project by clicking on it or through iDVD and get the same results. I've restarted my Mac. I've always been able to open the project previously as I worked on it.
Your advice to solve this problem would be invaluable. Thanks!

Where are your images stored? Where is the iDVD project stored? How does a 'file server' come into play? What is on the network?
I think you've hit on the problem if I'm understanding. The images and the project are stored on my computer. However, when I first tried burning this project about a month ago, I had an error message (can't recall what it was). I decided after that incident that my processor was too slow (700 MHz Power PC G4).
I decided I would use our iMacG5 which has a faster burner so I used our network to transfer the project to the iMac from my eMac. The image I had created played well but I started having problems when I wanted to open the project and burn the DVD. For one thing, the iMac only has iDVD 4. I could see that this wasn't going to work so I went back to the eMac.
Is there any way to salvage all my work. I really don't want to start over.
When you create an iDVD 6 project, the assets you used remain in their original location - if ANYTHING changes , you have a problem.
The photos I used are still in iPhoto and the original project is still on my hard drive. Do you need any other information?

Error message on CS4

I've instslled CS4 but keep giving me error message ' licensing for this product has stopped working' Error 150:30, can anyone help?

On Mac, please check whether you have the Anchor service installed in your system at the following path:
Library/Application Support/Flexnet Publisher/Service/
For Win, you may check the following path:
%Program Files%\Common Files\Macrovision shared\Flexnet Publisher\

Help with error message opening lightroom 5 on macbook?

I downloaded lightroom 5 on my macbook. i have os-lion. When I open the program and error message appears saying " error switching modules". I am missing all the options to import photos. When I try to click on lightroom preferences at the top of the screen nothing pops up. It seems like i am missing some of the options and the navigation pane. Do i need to update something else to be able to import photos and click between module pages?

55AB,
It appears the error message you have is an ink system failure error message. While it looks like your printer needs to be services there is also a thread with some suggestions out there with some results for this same issue. I have linked this thread this post. You will want to look at message 16 and 17 for what seems to be a resolution for your same printer. Hope this helps.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/error-message-0xc19a0035-quot-ink-system-failu...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Error message opening itunes

I get the following error message when I attempt to open itunes on my computer: The MSIEXEC.EXE file is linked to missing export MSI.DLL:222
Does anyone have a clue how to resolve this issue? Do I have any alternatives to another download? Lastly, Should I be able to access the itunes store without being able to open itunes on my computer (and if so, how?)?
Thanks!

YAY!!!! After doing some more research, I found a discussion that answered my question and WORKED!!
If anyone else is having the problem I did reveiw the following post towards the bottom by The Mimico Kid and your problem should be solved. I tried just about EVERYTHING to fix the problem and nothing was working, but this did:
http://discussions.apple.com/thread.jspa?threadID=1080311

Error message opening cs4

Similar Messages

Maybe you are looking for