Error Message - Organizer Data

When I try to synch, I get this message: CRTranRec::GetField Template: Database is corrupt. How can I fix this?

Hi and Welcome to the Community!
I don't find any KBs specifically on point to that error message, but I seem to recall some discussion threads here on it...please try a search here to see if you can find those. From the message content, one could deduce that the database on either your BB or in your desktop organizer app has corruption in it, but it's hard to know exactly which. You might try researching your desktop organizer app to see if there are any repair capabilities for it.
You also may wish to try the steps in this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
2nd Error message:
The following data ranged failed to refresh: ExternalData1 - Continue to refresh all
How do I resolve this? Trying to connect to Oracle DB environment 12C

What will happen if you rebuild the PivotTable/Table ?
Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
Wind Zhang
TechNet Community Support

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
What now?
Macbook Air.
Was working fine for the past year until now.

See more like this on the right.. this is the most common error reported here since mountain lion came out..
Or read C12.. http://pondini.org/TM/Troubleshooting.html
Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

Error message "Transfer date 30.06.2007 is more than one year after the clo

Hi SAP expert,
I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
Hope u guys can help me. Thanking u in advance.
Regards,
Nazrul

Hi SAP experts,
any solution for my porblem?
TQ

What to do when you get an error message about data execution prevention

i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

You came from the correct article. Here is what it has to say about that error.
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

SRM Error message Workcenter data incomplete

Client is having problems creating PO's in SRM. The client is getting an error message Workcenter data incomplete. Enter data in all required fields. I have ran the consistency check and it look OK.
When I move them from one org to another the error goes away. Both Org structures are at the same level, but in the one structure all the persons have the same error. Address for person (BP) 0000001232 contains errors: e-mail address missing when I run the Branch for sysnchronization for repair for this unit.

hI
Hope you might run HRALXSYNC report or BBP_BP_OM_INTEGRATE TRANSACTION
Go to the error Organisation and go to address tab at the bottom you may find one email button. check what is the entry of email address
br
muthu

Error message: The data for filename was already added to the form

I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

Revenue recognition and error message" Missing data: Provision account Message no. VU019

Hi,
I have configured revenue recognition type "B" for my item categories and I am using BOMs where pricing is set at item level. The issue is that when I have more than one components in my BOM then I get an error message (Missing data: Provision account Message no. VU019) at the time of saving sales order though I have configured the provision account. However If I enter the same component/material in the sales order without BOM which will have same pricing data then it does not through the above error message. Please help what could be the potential issue.
Best Regards
Javed

Have you checked the Analysis from condition tab once you created a BOM? If so, what is the message you could see for pricing.
G. Lakshmipathi

HT3275 I get an error message "Volumes/Data-1/Colin's iMac.sparsebundle" is already in use

My time machine is nor backing up. i get an error message "Volumes/Data-1/Colin's iMac.sparsebundle" is already in use. How do I get backups to recommence?

Restart the TC is usually enough.. restart the network if you need to.. in correct order.. modem,, TC.. Clients.. 2min gap.
Read other stuff. C12.
http://pondini.org/TM/Troubleshooting.html

Error message: User data is not indexed, yet. Index user data first

Greeting All,
Each time I try to index a 'Prepared' searchObjectConnector in the cockpit.. I get a message <
User data is not indexed, yet. Index user data first>. even that I ran the z_ESH_AU_UPLOAD_AUTH_RFC_720 report in R/3 system.. and checked the auth /user data in the admin cockpit.. and it was indexed..
1.any idea why I keep getting this error
2.any idea how can I clean the buffer or the message Queu.. my guess this might be not error but a q message..
3. any suggestion please
Thanks

Hi Areege,
I noticed that you created an OSS message on this issue. That was a good idea.
There is an answer for you in OSS from yesterday.
Kind regards, Klaus

Error Message after data load (error is "1130610")

We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

I am currently taking the course "C# Fundamentals" from Bob Tabors site: LearnVisualStudio.NET . I'm on day 8 where we are integrating SQL Server with C#. In Lesson 6 and 7, (havent' gotten past these two) I am having an
issue. In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title. I cannot get the db to appear in the Solution
Explorer, or open up so I can create a table. When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program. Even
though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
exactly what I need to do. Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job. Any help would be appreciated.
JennyBarrett7

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

While creating miro error message posting date 009 2011is not open

sir
while creating miro the error message is not open open for the posting date 009 2011

Hi,
The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

Can't log in / Error messages / Missing data

Here are a few solutions to problems people have run into:
Use only lowercase letters and no special characters for your username. If you use an uppercase or special character, Firefox Home may be able to log in but it will not be able to load your data.
Use only English characters and symbols for your Secret Phrase. Firefox Home won't work if you have non-English characters in your Secret Phrase.
If you get an "Unspecified Error" the problem is that your desktop hasn't finished sending it's sync data to the server. In this case have your desktop sync again and wait until it displays a "Last Update" time in the sync menu. Then do a refresh in Firefox Home. If you're finding that Firefox Sync isn't syncing, make sure you're not running Firefox in Private Browsing mode which blocks it.
If you get an "Unknown Error" the problem may be that your iPhone is blocked from accessing the internet. Check to see if you have to load up a page and log in before accessing the web (like a hotel or coffee shop).

Hi psj500,
Thanks for posting and welcome back!
Sorry for the problems you're having trying to log in to BT Mail. Have a look at this link BT Mail: common error messages and what to do about them
Post back and let me know how you get on.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Error Message - Organizer Data

Similar Messages

Maybe you are looking for