Error message Owl Orphanage : Photoshop:exe-Bad Image

I am having this error with Adobe Photoshop CS5.
With reading other posts I found an answer to this same question posted - except with CS4.
It mentioned the Plug-in folder and 32 bit and 64 bit. Here is where I get confused.
I pulled plug-ins over from CS3 and put them into my CS5 plug in folder, Is that where the problem came from. How do I now clean up my mess?
I have no idea how to tell what goes with 32 bit and what goes with 64bit....You could say, I don't know my bits and you would be right. LOL
Please help. I have benn ignoring it for almost a year now.
c.sewick

Here's a reference list of the original files under the plug-ins folder that came with Photoshop CS5 32 bit.  Note that if you've applied the updates some of the dates/sizes may be different.  But you really only need the names to know whether a file has been copied by you.
http://Noel.ProDigitalSoftware.com/temp/PhotoshopCS532BitPlugIns.zip
Let me know if you need a listing of the 64 bit files (i.e., if you're running a 64 bit Windows system).
-Noel

Similar Messages

  • Os windows 7 trying to install PhotoKit 2.06 in CS4 getting 'Owl Orphanage: Photoshop.exe - Bad Image. Have tried downloading Photokit from a different source - same problem. How can I get this to install please?

    Has anyone had a problem installing PhotoKit 2.06 in CS4? I keep getting 'Owl Orphanage: Photoshop.exe Bad Image. I have tried installation files from 2 different sources without success. Pixel Genius suggested dropping the unzipped files directly into Plug-ins -  that didn't work. Any suggestions would be appreciated.

    Hi Peter
    I am in touch with Pixel Genius, the plug-in developer, and so far ( this has been going on for 5 days) a solution has not been forthcoming, hence my post. The required files are shown in Windows Explorer but will not load when I fire up CS4. Previously, I ran version 1.2.4 of PhotoKIt without a problem but that was uninstalled to make way for the latest software. Pixel Genius have asked me to open up CS4 Help, System info, and send it to them which I have done. I wait in hope!
    John

  • PS CS4 opening error message: OWL Orphanage

    Had no problem installing the PS CS4 (update from CS3). On opening PS the first time, and every time after, I receive an error message:
    "OWL Orphanage: Photoshop.exe - entry point not found."
    This is followed by a bunch of numbers or addresses. After I shut the message, the program opens normally, and as farr as I've explored it, functions OK. Haven't had time to really explore things.
    Any idea what is producing this message?
    Am running Win XP SP3.
    J. Lipmanson

    Found It!!
    Ender and Fred:
    Didn't get to try Fred's suggestion as Ender's gave me another idea that fixed the problem -- although it's actually a work-around, and this is a bug.
    Ender you said to move the CS3 plugins folder. I didn't know if that was a typo or not, so I tried it with both the CS3 and CS4 plugins. Neither did anything, but I got no additional error messages, just the usual OWL error.
    I decided to try Fred's suggestion of eliminating the Preferences so opened them up to record my current settings. On a hunch I unchecked my Additional Plug-ins folder, which is on my second drive, D. I do this because I got tired of losing or copying or installing all my own plugins when I went to a new version. In CS3 I use the same additional plugins setting and there is no problem.
    When I unchecked the Additional Plugins folder, the message disappeared. Don't know if the problem is that the additional folder is on another drive or if it's because some of my plugins are incompatible with CS4. This is a bug.
    Fred - To answer your questions, I do not have any of the suites. I have standalone PS/Bridge and Lightroom. I also have the full Adobe Acrobat. When I first loaded PS-CS4 from the installer I immediately set my preferences, and yes, I did set the scratch disk. I also set the additional plugins folder. The second time I loaded PS was after a reboot, and the error message appeared for the first time.

  • Owl Orphanage Photoshop exe msvcp 110 error message

    I just returned from holidays and fired up my computer only to find that for some reason, photoshop cs 5.1 could not be accessed. The error message read "Owl orphanage Photoshop exe. Msvcp 110:dll System error. I used the program the night before leaving and am at a loss as to what happened. I am new to the technical stuff so any help would be appreciated.

    Yes, you have plugins installed.
    That error only comes from some third party plugins.
    And the MSVCDP100.dll error comes specifically from Nik/Google plugins that did an auto update recently (and botched it).

  • "Photoshop.exe - Bad Image" error [CS3]

    Hi everyone,
    I use Photoshop CS3, and every time I go to open a new document or open a saved document/picture/etc. I get a "Photoshop.exe - Bad Image" error that reads:
    The application or DLL C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\HPZRPP04.DLL is not a valid Windows image. Please check this against your installation diskette.
    I have to "OK" this message 4 times until I am able to use the program. Any help would be greatly appreciated.
    Thank you,
    Peter

    HPZRPP04.DLL
    Have you tried updating or reinstalling your HP printer? If it's a network printer, try setting up a local printer as the default printer and see if that error goes away.

  • Owl Orphanage: Photoshop.exe - Entry Point Not Found

    Using Photoshop CS5 64 bit on Windows 7.  New problem recently started.  Whenever I try and open PSCS5 I get the following error.  I then click OK and PS opens without further problem.
    OWL Orphange: Photoshop.exe - Entry Point Nont Found.  The procedure entry point ONPreviewLayerRelease could not be located in the dynamic link library ONImaging.dll.  Any suggestions?
    Thanks,
    Matthew Kraus

    Did you use their installer to install your copy of the plug-in?
    This is the list of files put in place by OnOne Software's Perfect Resize on a Windows 7 x64 system for 64 bit Photoshop:
    C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)
    05/17/2011  09:40 AM           112,640 ONPSEmulator2.dll
    05/17/2011  09:40 AM           869,888 onOneCoreFoundation.dll
    05/17/2011  09:40 AM           505,856 ONImaging.dll
    05/17/2011  09:40 AM           101,888 ONDocument2.dll
    05/17/2011  09:40 AM           411,648 onOneWelcomeDialog.dll
    05/17/2011  09:40 AM           250,368 OnOneWidgets.dll
    05/17/2011  09:40 AM           345,088 onOneToolbox2.dll
    05/17/2011  09:40 AM         1,198,080 icuuc42.dll
    05/17/2011  09:40 AM         1,409,536 icuin42.dll
    05/17/2011  09:40 AM             3,072 icudt42.dll
    05/17/2011  09:40 AM           237,568 glut32.dll
    05/17/2011  09:40 AM           147,968 ONCore2.dll
    05/17/2011  09:40 AM           272,896 glut64.dll
    05/17/2011  09:40 AM           350,720 onOnePR7ProEdCheck.dll
    C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Panels\onOne
    05/17/2011  09:40 AM               233 onOne Palette Config.txt
    05/17/2011  09:40 AM             4,681 onOne.jsx
    05/17/2011  09:40 AM           610,989 onOne.swf
    C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Perfect Resize 7.0 Professional Edition.plugin
    05/17/2011  09:40 AM         1,145,344 GFAutomation.8li
    05/17/2011  09:40 AM         3,138,560 GFFilter.8li
    05/17/2011  09:40 AM         1,470,464 GFFormat.8li
    05/17/2011  09:40 AM           317,440 onOneActivationToolbox.dll
    05/17/2011  09:40 AM           411,648 onOneWelcomeDialog.dll
    -Noel

  • HELP....Error Message...Photoshop.exe-Entry Point not found

    Hello
    I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
    Photoshop.exe-Entry point not found
    The procedure entry point
    ?terminate@struturalimageeditingYAXXZ
    Could not be located in the dynamic link library Patchmatch.DLL.
    I have tried to redown load but keeps saying that it is downloaded
    Help please
    Bobbi-Lee

    Please follow the below mentioned steps let me know if they work:
    1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
    2. Restart your system
    2. Install Ps CC app from Creative Cloud
    3. Do not launch Ps
    4. Update to 14.1.2 via the Creative Cloud desktop application
    5. Once the updates are successfully applied, Launch Ps CC to verify.

  • SRM MDM Installation error  :MDM Console Install.exe-Bad Image

    Hi,
    I have installed SRM 5.5 and need to install SRM MDM, but when i am trying to execute MDMConsole Install from GUI _CLIENTS folder getting below error.
    :MDM Console Install.exe-Bad Image
    The application or DLL C :\windows\~GLC0000.TMP is not a valid windows Image, Please check this against your installation deskette
    I tried to execute other installables also getting same error
    Please advice is something is missing
    Thanks,
    Jai

    Thanks to all,
    Downloaded the installable from maket place and it works now.
    I think I tried 64 bit setup earlier
    Regards,
    Jai

  • "Photoshop Elements10.0.exe - Bad Image" Error message

    My  Photoshop Elements 10 will no longer start.
    I have been running Windows on my PC since initial installation and have not changed my set-up in any way, but now receive a "Photoshop Elements10.0.exe - Bad Image" Error message when trying to start my program. The error further reads c:Program Files 9x86)\Adobe\Elements 10 Organizer\amtlib.dll is either not designed to run on Windows or it contains an error etc. I have deactivated, removed and then reinstalled Photoshop Elements using my original discs and serial number, but continue to get the same message.
    Any suggestions?

    Hello,
    Try doing a clean uninstall of the BlackBerry Desktop Software. Then reinstall it in an admin account on the PC. http://bit.ly/aMZYJL
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • "Acrobat.exe- Bad Image" error message, Can't open anything with Acrobat

    I have Acrobat Pro 9.0
    OS Windows 7
    Just started having this error problem show up within the past couple weeks.
    Every time I try to open a document the browser freezes up for a few minutes (and I've tried on two different browsers), wont load the page, then I get this message:
    Acrobat.exe - Bad Image
    C:\Program Files (x86)\Adobe\Acrobat 9.0\ Acrobat\BIB.dll is either not designed to run on Windows or it contains an error.
    I have had this program for several months and never had an issue.
    Haven't changed anything I can think of...
    Any suggestions would be greatly appreciated!!
    I also tried just opening the program directly and got the same message.

    My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?

  • RIM.DESKTOP.AUTOUPDATE.EXE - BAD IMAGE ERROR MESSAGE

    I use a Dell Inspiron laptop with Vista OS. For no apparent reason that I can determine, when I try to open DTM v6.0.2.44, I get the following error message, "Rim.Desktop.exe - Bad Image". After closing this error message, a second error comes up, "Rim.Desktop.Autoupdate.exe - Bad Image" .And after closing the latter, a 3rd error message comes up, "Rim.Transcoder.exe - Bad Image". Finally, I get a repeat of "Rim.Desktop.Autoupdate.exe - Bad Image" and although it takes several tries to get rid of this error message, once I do, the DTM appears to work fine with Syncing and backing up my data. All other software works perfectly and without any error messages. Any ideas?

    Hello,
    Try doing a clean uninstall of the BlackBerry Desktop Software. Then reinstall it in an admin account on the PC. http://bit.ly/aMZYJL
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • AcroMissingCompWClass Acrobat.exe Bad Image error message

    Hi, I have a Windows 7 PC and InDesign, IIustrator CS4. When I try to print I get AcroMissingCompWClass Acrobat.exe Bad Image error message. Has anyone come across this?

    My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?

  • Re: Can't Logon - How do I fix the error "Winlogon.exe- Bad Image"?

    Last night, my laptop did something odd. The screen went blue and it ran a check. The check was in three parts (thats all i remember) Once this was done, my laptop restarted and was working fine.
    Later on this morning it crashed and restarted, but when it got to where it usually displays the user logons, it came up with an error message. The title was winlogon.exe- bad image
    and the message described how the file was incorrect.
    Now my laptop wont let me logon. How do i fix this?

    Sounds like the file system has corrupted unfortunately it has affected one of the important files required for windows to boot up.
    You will need a boot CD to repair the problem for this I would recommend Microsoft Diagnostics and Recovery Toolset which you can download from http://www.microsoft.com/downloads/details.aspx?familyid=5D600369-0554-4595-8AB4-C34B2860E087&displaylang=en
    Run the installer, go to the install folder and burn "erd50.iso" as an image file (not a data CD) using software such as Nero.
    Next you must boot from CD-ROM I'm not sure what procedure this is for your laptop so consult the manual or change the boot order in the BIOS either way it's the method as booting the recovery disc.
    When the software has loaded you will be asked which install of Windows you wish to repair if no drives i.e. C: are offered in the list box then you may have to change the BIOS setting with regards to AHCI compatible mode and switched back when you're done.
    If C drive is visible good then the hard drive is accessible however you must select "Do not attach a Windows installation." and click on OK.
    Click Start, and select "Command Prompt" you will get a black box with white text.
    type the following and enter: chkdsk c: /f /r
    This command will perform a full scan of your hard drive and correct any errors it may find which could take up to 45 minutes depending on the size of your drive.
    When it has finished shutdown and restart your laptop without the CD in the drive, if you've changed the AHCI mode in the BIOS then change it back.
    If Windows still doesn't startup then boot from the CD again and rerun "Command Prompt"
    type the following and enter:
    c:
    cd\windows\system32
    if entered correctly your screen should display: C:\Windows\system32>
    type the following and enter: (note: the dot is required and not a typing error)
    copy dllcache\winlogon.exe . /y
    if all goes well you should see a message: 1 file(s) copied.
    Shutdown the laptop restore any BIOS settings and hopefully Windows will startup again as normal. :)
    Richard S.

  • Itunes.exe bad image error

    I have been trying to get iTunes up and running for months now with no luck what so ever. I'm running on Windows Vista Service Pack 2.
    On opening iTunes I get the error message
    'iTunes.exe - Bad Image
    C:\WINDOWS\system32\softpub.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." '
    After clicking Ok a window appears saying itunes has stopped working and that its trying to find a solution. only button is 'close program'. After closing the program a message appears in the bottom right of the screen saying DEP (Data Execution Protection) has closed itunes to protect my computer.
    As well as this problem I have been unable to perform a windows update. It has been giving various error codes which I tried to fix using the windows Fixit programs and other fixes but both problems persisted.
    I looked thorugh a lot of discussions on different forums online and have tried various things but to no avail. At first I uninstalled iTunes and reinstalled it (I have now done this around twenty times after trying different fixes) and it downloaded and installed perfectly every time but whenever I tried opeing it I would get the bad image error message.
    I have also tried running system file checker (sfc scan) by running command prompt as administrator and it says
    'Beggining system scan. This may take some time.
    There is a system repair pending which requires a reboot to complete. restart windows and run sfc again.'
    But when I restart windows and run sfc again it gives exaclty the same message. I repeated this on numerous occasions after trying other fixes but always gave the same message.
    I also read that replacing the softpub.dll file in the system32 file could be a fix, so I downloaded a new file but when I tried to either rename the old one, move it or do a move and replce with the new file I was told that I couldn't because it needed the administrators permission. I am the only user and was logged in with administrators rights so don't know why it asked and when I tried to give permission it says
    ' Destination Folder Acces Denied
    You need permission to perform this action.'
    It gives the option to retry but this just produces the same message.
    Any help would be massively appreciated.

    Did a restart and there are a few errors and warning listed below,
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    warning 7 - Kernel-Processer-Power
    The speed of processor 1 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
    warning 7 - Kernel-Processer-Power
    The speed of processor 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
    error 7000 - Service Control Manager Event Log Provider
    The Parallel port driver service failed to start due to the following error:
    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    warning 7044 - Service Control Manager Event Log Provider
    The following service is taking more than 4 minutes to start and may have stopped responding: Avira Real-Time Protection
    Contact your system administrator or service vendor for approximate startup times for this service.
    If you think this service might be slowing system response or logon time, talk to your system administrator about whether the service should be disabled until the problem is identified.
    You may have to restart the computer in safe mode before you can disable the service.
    warning 3004 - windows defender
    Windows Defender Real-Time Protection agent has detected changes. Microsoft recommends you analyze the software that made these changes for potential risks. You can use information about how these programs operate to choose whether to allow them to run or remove them from your computer.  Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow.
    For more information please see the following:
    Not Applicable
               Scan ID: {C9F59478-26AB-4B82-BE2B-2386B5269205}
               User: BILL\Cust
               Name: Unknown
               ID:
               Severity ID:
               Category ID:
               Path Found: driver:RapportIaso;file:c:\programdata\trusteer\rapport\store\exts\rapportms\ba seline\rapportiaso.sys
               Alert Type: Unclassified software
               Detection Type:
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    error 10016 - Distributed COM
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    From checking the times I saw the message appear just before the last two error messsages.
    I have also recently run some malware software which has quarentined about 20 files and since then the speed has been getting slower and slower to the point that the last restart took 20 mins

  • Updating Acrobat 9.0 causes error "Acrobat.exe - Bad Image"

    Full error is:
    Acrobat.exe - Bad Image
    C:\Program Files (x86)\adobe\acrobat 9.0\acrobat\BIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
    Running repair doesn't fix it, only un-installing it and re-installing from scratch. This happens on multiple machines with the same result. As soon as the update is ran it no longer opens and has the error.
    I've tried manually updating it version to version starting at the first 9.1 release but I run into the same error after installing the first update. Uninstalling Acrobat after manually running the first update produced another error durring uninstallation. Error 1905.Module C:|Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\authplay.dll failed to unregister. HRESULT -2147220472. Contact your support personnel.
    System is Windows 7 Enterprise 64bit running on a VDI in a box from Citrix. Version of Acrobat is Pro.
    Any thoughts or ideas on this would be great, thanks.
    Joel

    Are you running updates from the Help menu in Acrobat or by downloading the updates. When you have problems, it is probably best to try running the updates as downloads from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. You will need to generally install the updates in order. You would reboot after the last update.

Maybe you are looking for