Error message panel on desktop when I launch Firefox
Just installed latest update to 20.0. Usually, but not every time, when I launch Firefox the following error panel appears on the desktop:
nsAppShell:EventWindow:firefox.exe- Entry Point not Found
The procedure entry point
?JS_DefineFunction@@YAPAUJSFunction@@PAUJSContext@@PAUJSobject@@PBD6AH0IPAVValue@@JS@@ZII@Z
Could not be located in the dynamic link library mozjs.dll.
When I click "OK" Firefox goes ahead and launches without any apparent issue.
I use Colorful Tabs too, and this error started occurring (intermittently) after one of the Colorful Tabs updates. After receiving an update yesterday (I think), the error message now appears TWICE before the browser opens.
While I'm quite fond of Colorful Tabs, I'm less fond of the error so I'm going to disable to plugin and see what happens.
Similar Messages
-
Please can someone tell how to fix the problem I have with firefox on a mac OS. When firefox opens it comes up with an error message " well this is embarrassing...." and continues to ask if I want to close or restore the tabs that are open.
Does anyone have a simple fix?
Thank you
BeamerHello Beamer, you must update to latest (21.0) version, the bug it is fixed in firefox 21!
https://bugzilla.mozilla.org/show_bug.cgi?id=845681
[https://support.mozilla.org/en-US/kb/update-firefox-latest-version#os=mac&browser=fx21 Update Firefox to the latest version]
thank you -
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I deleted Firefox and reloaded it - did not solve the problem. This started occurring after I downloaded Windows Service Pack 2. I have Vista 7 OS. So every time I close and relaunch Firefox, I have to sign in with my username and password. Very very, annoying. If I can't get this corrected, I have to start using another Browser. Thanks for your help. Richard
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/830592]</blockquote><br>
(When I launch Firefox 4.0.1 I get an error message that says "We noticed your may have signed inor signed out in another window. Click Ok to reload your page." I deleted Firefox and reloaded it - did not solve the problem. This started occurring after I downloaded Windows Service Pack 2. I have Vista 7 OS. So every time I close and relaunch Firefox, I have to sign in with my username and password. Very very, annoying. If I can't get this corrected, I have to start using another Browser. Thanks for your help. Richard)It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.
Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue. -
I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
Error message to be thrown when multiple enteries are not entered
Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif. -
I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?
Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W -
Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.
What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive. You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed. Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM. Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html* -
What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.
Solving MSVCR80 issue and Windows iTunes install issues.
-
I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
Thanksemail ituens at expresslane.apple.com and they will help you for nothing
-
HT201210 iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
http://support.apple.com/kb/TS3694
-
I have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help
i have an error message that comes up when i try to get into itunes... 0x 80092013 can anyone help
Hi Katy19831,
Thanks for using Apple Support Communities. These articles may help with the error you're seeing:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
- Ari
Maybe you are looking for
-
I have a 13 inch macbook pro that i got last month. I was wondering whether windows 7 will work smoothly on it or will it be slow putting in mind that it has 2 GB of ram and a 2.2 GHz processor Thank you
-
Using data collected on a form and updating a database
I have created a form using Lifecycle Designer ES 8.2 to allow users to populate with information and send it to a central control point. I would like to take the information from the pdf form and then allow the user at the control point to update d
-
Real Time Application of Void class
Dear Friends, we know that there is class called Void with one field named TYPE. where can we apply this class?
-
My computer crashed and I need a new serial number for Lightroom 4. I have my product key.
-
Being allowed to import music to itunes but not music videos?
Why can you import music you own to your itune collection but not music videos that you own?