Error message photoshop cs4 need help with

I get this message when in view of pdf open - how do I do what it says to do win7 pc
TIA

There's not much you can do about that message. Depending on how much video card memory you have and the resolution of your monitor you'll only be able to open a limited number of windows and still have OpenGL acceleration. You'll have to either lower the resolution of your monitor (not recommended), buy a video card with more memory (i doubt it'll help a lot when dealing PDF's with a ton of pages), upgrade to Photoshop CS5 (it slightly sidesteps this issue) or just live with that limitation.
Also, that's not an error message, it's just a warning telling you that you won't be able to use the OpenGL features on more than 25 (in your case) windows/documents at a time.

Similar Messages

  • Cannot open Contact Sheet II on my Elements 12, gives me error message. Can anyone help with this?

    In Elements 12, I cannot open Contact Sheet II. I keep getting an error message.  Can anyone help with this?

    That's a different file.
    Try this:
    1. Click on your desktop
    2. Then in the Go menu click on Go To Folder
    3. Paste the following line in the Go To Folder dialog and press Go
    ~/Library/Preferences/Adobe/Plugins/Adobe Contact Sheet II PSE12/Elements
    4. That should open a finder window something like below.
       Drag the Adobe Contact Sheet PSE12 Prefs to the Trash on the dock
    5. Start the pse 12 editor and see the contact sheet II works.

  • Program error message - Photoshop CS4 for Mac

    I started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same  thing. I read up a little about how to fix it but I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.) Any ideas? I'm not sure what to do!
    More info:
    It's a psd file.
    There are only 2 layers on the files, one is a vector smart image.
    I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
    Thanks in advance.

    Hi,
    I have this same problem. I use Font Agent Pro and I only have about 50-ish foundry fonts activated. I'm wondering if anyone else has found a fix? The second I open Photoshop I get an error message and I have to force quit, let's not even begin thinking about opening a file.
    I'm on OSX 10.6.8, running CS4. This is getting frustrating. I'm considering reinstalling the whole suite, there goes my entire evening.

  • Ovi store error message...need help!

    hiya i was looking thru apps on the Ovi sore and after just one page or scrooling an error message pops up saying "The operation could not be completed due to an error". why is that? as far as i know my signal is fine and i have unlimited internet on my phone tariff and i got to update the phone's software. please help!

    I also get this message and the BBC iPlayer was available for download, downloaded it and have not been able to access it yet. Very poor - We need an answer I am using the 'New' X6 - Come on Nokia give us a shout

  • New error message...need help

    I got new error message in my application. it happened to even very simple test code
    like:
    An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'
    An error occurred executing a statement.
    Schema: Generic Recordset (NI).
    Statement: UUT_RESULT.
    ODBC driver does not support the requested properties.
    -2147217887; User-defined error code.
    Step 'Log Results to Database' of sequence 'Log To Database' in 'Database.seq'

    Hello,
    I found 2 KnowledgeBase articles that I believe will be helpful in troubleshooting this Citadel ODBC issue:
    http://digital.ni.com/public.nsf/allkb/BD95183884B0F0F086256D3D0077C888?OpenDocument
    http://digital.ni.com/public.nsf/allkb/486B13FA750376A386256E8E0025DECB?OpenDocument  
    Some other things to try:
    It sounds like this has nothing to do with your code module and everything to do with TestStand communicating with the Citadel Database. Have you tried running a sequence with just one step (maybe a pop up) and turning database logging on and see if you get the same error?
    With warm regards,
    David D.

  • Poor RAM management in Photoshop CS4 - need help!

    I have done numerous hours of research over the years only to give up and come back to this subject later on. I will try again!
    I must ask: is there ANY way to get Photoshop CS4 to automatically flush used RAM after closing image files? I'm tired and annoyed of CS4 eating more and more RAM without freeing anything after an image has been closed. An image shouldn't still eat up memory when it isn't even open anymore. It seems to be terrible RAM management of the program itself and how Adobe has forgotten to write that little snippit of code to clear the RAM after an image has been closed.
    I know this is not because of:
    Cache levels
    Setting too large of a saved history state; purging history cache or any kind of cache still never frees RAM
    A lack of updates; I have been up to date with CS4 very punctually as they were released
    The computer I am on; this poor RAM management has been around since CS2 and it's the same on the last 4 computers I have used
    Does CS5 still do this too?

    Your historically conditioned to believe software apps should swap data a standard way. The way your using the system is probably not the most effective processing for your workflow.
    -  I have hundreds of TIFFS that take 60-120MB each in processing, and 8gb  of RAM. The more total RAM actually usable that I can use the better.  How the heck can using less of what is actually available RAM enhance my  workflow? Standard are standards for a reason. The ink industry for  printing is non-standardized and people waste $3-5 billion+ a year only  increasing on unused ink that is still remaining in their cartridges, because there is no standard way of manufacturing ink, filling cartridges, or monitoring how much ink is actually left in a cartridge. I'd love for more standards in more markets. Unless natively stable, all other programs on my computer work flawlessly with said demonized traditional methods and standards, even in high bandwidth applications a hell of a lot more intensive than  Photoshop CS4 will EVER be. Currently people keep disregarding the fact that in my situation CS DOESNT FREE THE RAM.  CS4 is balloon. Balloon inflate. Never deflate even when emptied. Overflow into other rooms of critical OS space where balloon shouldn't be when it fill the room full. How many analogies must I give? Must I use sign language? Binary?
    You don’t have enough experience with these topics. This is actually a
    true statement. Most companies with systems large and small have to
    think about what it costs to process specific jobs. If one in a thousand
    jobs swap, a decision must be made to know how much it would cost to
    retrofit a very expensive environment to keep that one job swap from
    occurring. Most times it is better to let the swap happen for this
    non-mission critical item than pay $50,000 to upgrade all systems.
    I said NON EMERGENCY SITUATIONS.  Emergencies are once in a while. You're repeating what I said like a parrot, but in different longer sentences with more words telling me I don't get what I'm talkinga bout. You're missing the full picture of what I am actually saying. That 1 in 1000 overflow would be exactly true in my situation with 7GB used, but it's not. Why not? Because the CS4 balloon will not deflate itself or reuse the empty space inside the balloon when it's needed, and the OS isn't given back any of the empty space to work with to know it doesn't need to page anything. In turn CS4 is going to try and scratch too when the OS is telling it that is has no more RAM left when indeed it does, but its hiding it in its own reserve balloon from itself. If a company needed just 700MB more room and either they spend $50k to upgrade to that, or get CS4 to release some space once in awhile, they'd sure as hell bother Adobe or write their own mod to force CS4 to release unused allocated RAM to get it.
    Self inflicted only because I want to push the limit of what is actually usable on my machine, not some 'safe zone' with high tolerance. My system is tuned for a fine line of performance and I know what it can hande. I know what it uses and it does not spike usage for random OS operations. It can handle 7GB to 7.2GB of RAM of freely used RAM to one active program if it needs that big of a workspace to work. If CS4 isn't going to reuse the hollow areas in that balloon, then that's not my fault. My OS can handle the fine tuning, and CS4 is what cannot, obviously, since it can see that much RAM but not use the last %10 correctly.

  • ITunes Error Message. Still need help. Please.

    I still haven't been able to use my ITunes for about two months. I need help to fix the problem. Here's what it says when I try to start ITunes:
    Microsoft Visual C+ + runtime library
    Runtime Error!
    Program: C:\program files\itunes\itunes.exe
    This application has requested to terminate in an unusual way. Please contact the application’s support team for more information.
    If anyone can help me with this I would greatly, greatly appreciate it. Thanks.
      Windows XP  

    Have you tried un-installing iTunes, downloading the program again from Apple, and re-installing?
    It's always worth a try, as it should help you clear off anything causing the problem and start again.

  • Error message when uploading - need help to fix

    I am getting this error message when uploading to ftp host:
    ﷯Error:
    Error uploading file master_a-master.css. Click Resume to try again. If this problem persists, try again later.
    [421 Idle timeout (600 seconds): closing control connection]
    how do I fix this?? have already tried to resume,,, tried from scratch.  closed program and opened again.  does this each time. 

    Make sure you're doing everything recommended by BlackBerry:
    www.blackberry.com/btsc/KB34045
    If you're hitting reload and it isn't reloading the OS for you, perhaps try reloading a backup file you've created (hopefully you've done some backups).
    Keep us up to date on your progress.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Printing problem with Photoshop cs4, need help

    I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2.  I CAN print from other programs such as TextEdit or Pages.  And my printer prints a test page without any problems.  However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it.  Does anybody know the reason for this??  Thank you for your help. 

    I haven't heard of anyone else with those specific symptoms.
    But another poster has had problems with his Canon 9900 not printing (but no blank page).
    The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
    After that, you probably need to check with Canon.

  • Help with error messages (Was: i need help :[)

    There is some errors on this that i dont understand. :{ could someone help me out?? http://jsfiddle.net/bXDHE/173/

    Have you defined a site in DW yet?  You have paths to files:/// on your local hard drive that should be pointing to the Fonts folder in your local site folder.  Right now they are pointing to your Mac hard drive which nobody except you can see.
    src: url("file:///Macintosh HD/Users/takatime/Desktop/WEBSITE EMPROS/avenir.eot?") format("eot"),
    url("file:///Macintosh HD/Users/takatime/Desktop/WEBSITE EMPROS/avenir.woff") format("woff"),
    url("file:///Macintosh HD/Users/takatime/Desktop/WEBSITE EMPROS/avenir.ttf") format("truetype");
    Use the W3C Validation tools to check your code for other errors.
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    Nancy O.

  • Error while updating account: need help with error msg

    Hi all,
    when I try to change the AccountOwner of an Account via Web Service I sometimes get the following error:
    <faultstring>Method 'WriteRecord' of business component 'Account' (integration component 'Account') for record with search specification '[External System Id] = "27446"' returned the following error:"The selected record has already been added to the list. Please add another record or close the pop-up list and continue.(SBL-DAT-00357)"(SBL-EAI-04375)</faultstring>
    Can anyone please help me to interprete this fault?
    Thanks
    Michael

    Looks like you are creating an Account Team member who already exists in the account team vs just updating the Account owner

  • RIM Error Message?? Need Help!

    I have been getting dozens per hour...the following is a sample...anyone know what this is and how I can get it to stop???
    RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

    Hi and welcome to the Forums!
    Here is a link on the message that will tell you the cause and resolution. KB 13840
    Please give us information on your device model number and your complete setup, including the desktop manager
    if installed.
    With all the correct information we can have your thread moved to the best forum for advice.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • FW CS4 need help with gradients & png files

    Relatively new to FW CS4.  I have a png file for use in a PV7 css based site.  Read the docs and still can't figure this out.  The png file is a base image with 3 color sections.  I need to change these three original individual sections to a new color scheme...I can use a regular fill...but I would like to keep the slight fading effect of the original pngs.  In addition...the png's are obviously in png format..but if I export as jpg will I loose the gradient fill/opacity effect in a jpg file ?
    Original png...want to change to light blue tones: Note the fading to the right side of the outside columns.
    If not...how do I change the color scheme in each section of the original png ?  Or do I export as is and modify the resulting jpg's ?
    If I use a gradient fill or paint bucket...the effect just overlays the original gold type color...giving me a new color all together with the original background still partially showing through underneath the new color change ?
    If I delete the gold tones in the png image...then I can't fill the empty space with any other color...nothing works.  I've also tried color find/replace
    but with no results or changes.
    Second problem is when I do apply gradient fills to this png...or jpg...the fill seems to me to be from top to bottom of the section ?  I need the fill to move from left to right as above ?  Any ideas here also ??
    I posted on the PV7 FW group but it's not that active and was more confused by the answers ?
    Thanks much...I'm stuck for now.
    Tim

    After following Lorains' gradient link, when you have the first box tweaked to your liking and you need it replicated to the remaining two boxes (without having to go through the process again)
    1. Select the box that has the new Gradient, then Edit > Copy (or Ctrl/Command + C)
        Then select the remaining two boxes that need the new gradient style, then Edit > Paste Attributes
       This process with carry over (copy/paste attributes) the first box to the others.
    Or
    2. Select the box that has the new Gradient changes, then in the Property Inspector (PI), to the far right, tick the small icon under to create a New (Object) Style. Once created, open the Window > Styles Panel. Select the two remaining boxes on the canvas then click the New Style icon in the Styles Panel to apply.
    1. is memory resident/temporary and will be lost when you later utilize the Copy command. But 2 has more 'staying' power and you can reuse it, go back to it, save it to disk, and tweak it further to create new ones at any time.
    If you absolutely have to keep the final result as a .jpg, then turn off the Canvas color. Open the Window > Optimize Panel, set the output to jpg, BUT set the MATTE color to the color that matches the background of your page.
    Otherwise, output to .png8/png32 with Transparency .
    h
    h

  • WS-C3750-48P system error message... need help

    All,
    Does anyone come across to this system error massages on 3750 switch? I can not find any ref regard this error from Cisco website.
    Feb 10 22:32:41.262 UTC: %SUPERVISOR-3-IIC_INIT: IIC Reinitialized
    Feb 10 22:35:54.284 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to up
    Feb 10 22:35:58.545 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to down
    Feb 10 22:36:05.525 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to up
    Can any tell me what the messages means and why it occurs? Thanks in advances
    regards,
    Sean

    What IOS version is the switch running? The message:
    Feb 10 22:32:41.262 UTC: %SUPERVISOR-3-IIC_INIT: IIC Reinitialized
    What kind of media converter is on interface gig 1/0/1? I am thinking it's related to that interface flapping. Is the error peristent? If it is, does the error stop when you shut down the interface gig 1/0/1?

  • Errors in Dreamweaver CS4 need help

    Just yesterday I started getting the following error when trying to open Recordsets:
    While executing onLoad in ServerBeh-ASPVbs-SimpRS.htm, the following JavaScript error(s) occured:
    At line 271 of file "C:\Program Files\Adobe\Adobe Dreamweaver CS4\Configuration\Commands\ServerBeh-ASPVbs-SimpRS.js: type has no properties
    What I have done so far:
    1. renamed Configuration folder
    2. Drilled down and found the .js file in DW3 and copied it in
    3. Reinstalled DW
    If anyone could shed some light on why all of a sudden this is happening I would greatly appreciate it.

    Just yesterday I started getting the following error when trying to open Recordsets:
    While executing onLoad in ServerBeh-ASPVbs-SimpRS.htm, the following JavaScript error(s) occured:
    At line 271 of file "C:\Program Files\Adobe\Adobe Dreamweaver CS4\Configuration\Commands\ServerBeh-ASPVbs-SimpRS.js: type has no properties
    What I have done so far:
    1. renamed Configuration folder
    2. Drilled down and found the .js file in DW3 and copied it in
    3. Reinstalled DW
    If anyone could shed some light on why all of a sudden this is happening I would greatly appreciate it.
    I sounds like your Recordset code may be corrupted. Try deleting the Recordset and recreating it.
    HTH,
    Randy

Maybe you are looking for