Error Message: Planning level is inconsistent

Hi,
I've created planning level with 25 planning packages. I then created 10 global planning sequences comprising of one or more packages from the same planning level. The planning sequences were executed successfully. Now suddenly the sequences are giving error that all the planning packages are inconsistent.
Any Idea?
Thanks in advance,
SK

Hi,
Have you made some changes in the Planning level like deleting some key figures, adding some restrictions on the characteristics, removing some characteristic etc.
If you do something at the planning level without making sure that the corresponding changes have been taken care of at the Planning package level, then you would get this error message.
Navigate to the planning package in change made and most likely the system will prompt you of the changes done in the higher level planning objects.
hope it helps.

Similar Messages

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

Error message stops .wmv creation: "Inconsistent Audio Sample Rate..."

Just recently when attempting to export a video into the .wmv format, QuickTime Pro 7.2 gives me this alert message, "Inconsistent Audio Sample Rate. The media you are exporting contains audio with multiple sample rates." QuickTime will not compress (export) to .wmv. It will export to .mov. and .m4v.
This problem is new. For more than a year my weekly video exported to the .wmv format without fail.
I am working on a Mac G4 Dual Processor and iMovieHD.
Any help you can offer would be greatly appreciated.
Mac G4 Dual Processor Mac OS X (10.4.10)

Just in from flip4mac support:
The recent release of QuickTime 7.2 created an audio compression error for Flip4Mac WMV Studio, Studio Pro and Studio Pro HD customers. Specifically, when encoding WMV files with Flip4Mac WMV v.2.1.2 using uncompressed audio sources on QuickTime 7.2 systems, customers were receiving "Inconsistent Audio Sample Rate" error and the encode will fail. This problem has been resolved with the beta release of Flip4Mac WMV v2.1.33. If you are using QuickTime 7.2, please upgrade to this release at http://www.flip4mac.com/wmv_beta.htm

Error message when doing invoice verification.

Hi Gurus,
During doing invoice verificition with delivery notes.Im getting a error message that level F1 belong to cash postion,source symbol PSK.Plz any body can help me to solve it
Thanx

Hi
Planning level belongs to the cash position, which means you can only use it for G/L account line items.
Levels are defined and allocated to a source symbol in view V_T036. The source symbol is allocated to the cash position or the liquidity forecast in view V_T039.
Please check these Tables using Transaction SM30

Error message in Tcode MFBF

Hi,
i want to create an REM Backflush with Tcode MFBF but i have this error message : " Planned costing is not apdated "
Please how to resolve this ?
Regards.
Edited by: jehade el aoumari on Feb 5, 2009 9:22 AM

Dear Jehade,
1.Check whether a product cost collector exists for the material for which you want to carryout an
assembly backflush in REM.Check this in KKF6N.
2.If there's no product cost collector create one.For creating a product cost collector you require a
production version which is a combination of Rate Routing & BOM.
3.Once after these steps,goto KKF6N->change mode->click on cost calculation button and save the
data.
4.Then check in MFBF.
check and revert back.
Regards
Mangalraj.S

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Error when assigning planning level in Treasury - Link to Cash Management

Dear SAP Gurus,
I am trying to assign the planning level in FSCM (ECC6) using this configuration path Treasury & Risk Management->Transaction Manager-> General settings-->Link to cash management--->Assign Planning Level - but when I tried to assign the combination of product type, status, level, bank known and unknown, I get the error message "Entry cocode 51A 10 does not exist in TZC37 ( check entry). I tried to find the maintenance dialog in SM30 for table TZC37, the IMG activities points to Loans > Company Code-Dependent Settings for Product Type. But I am assigning MM, FX product type. Has anyone encountered this problem? Any help will be much appreciated.
Thanks and regards,
Jidji GM

Hello,
Even I got the same issue when I was doing the configruation for "Assign Planning Levels" (FZFD) in TRM (Link to Cash Mgmt).
The easiest way to get rid of TZC37 Entry, do not enter anything in second column which is Status of data record (STA), system will automatically take the value as "0"
Thanks - Imran.

No organizational data exists on item level (error message)

Hello everybody,
I still have this error message when try to create a shopping cart : 'No organizational data exists on item level'
Following a lengthy discussion with SAP Support, SAP recommended that I remove the reference of the Purchasing Organization and Purchasing Group to the backend system (R/3).
After removing the reference I was able to complete the SC creation process, but I got an error at the PO creation process, where I am unable to release the PO since it is not linked to a backend (R/3) Purchasing Organization/Group.
I am currently using SRM 4.0 with EBP 5.0 in Extended Classic Scenario.
I need an Urgent help on this issue !!
Thanks,
Lina

Hi,
If You have own PO document type (ZCS) then don't hange it.
in SYS attrib add a local EBP system
If you don't use local categories, You don't need to add product cat. * for local system.
in my ppoma_bbp company have two purch orgs.
-for local (fields with purch org and system id is empty)
-for backend (fields with purch org is filled from backend system.)
Example:
Company (function with company code PW01\R3100)
- Purch org local (function purch. org. checked but not filled)
- Purch group local (function purch. group checked bud not filled)
- Purch org backend (function purch. org. checked with values PZ1\R3100)
- Purch group backend (function purch. group checked with values PZZ\R3100)
Regards,
Marcin Gajewski

Component level display of the Custom Error Message in 11g

Iam using custom error handler that extends the default DCErrorHandlerImpl class to handle the Custom exceptions thrown from the service layer, and able to see the exception displayed in the ADF UI in a popup window.
How can we do Customization in order to display the Custom error message inline with a component (i.e. associated with a specific UI component with the arrow mark look and feel ) instead of the global level message displayed as a pop up window on the ADF UI page? Please suggest.
Thanks,
Kayal.
Edited by: user11217416 on Feb 15, 2012 6:07 AM
Edited by: user11217416 on Feb 15, 2012 6:14 AM

Hi,
Try as follows
final static int MSG_FATAL = 1;
final static int MSG_ERROR = 2;
final static int MSG_WARN = 3;
final static int MSG_INFO = 4;
      public static void showMsgForRelevantComponentAll(int iSeverity, String sMsg, UIComponent uIComponent) {
          FacesMessage msg = null;
          switch (iSeverity) {
          case MSG_FATAL:
              msg = new FacesMessage(FacesMessage.SEVERITY_FATAL, null, sMsg);
              break;
          case MSG_ERROR:
              msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, sMsg);
              break;
          case MSG_WARN:
              msg = new FacesMessage(FacesMessage.SEVERITY_WARN, null, sMsg);
              break;
          case MSG_INFO:
          default:
              msg = new FacesMessage(FacesMessage.SEVERITY_INFO, null, sMsg);
          FacesContext facesContext = FacesContext.getCurrentInstance();
          facesContext.addMessage(uIComponent.getClientId(facesContext), msg);
      }

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
or
Adobe contact information - http://helpx.adobe.com/contact.html

Error message while connecting to Planning Web 9.2.1

Hello,
While creating the database in Desktop Planning, I have the following error message:
"Application is not registered in HUB. Can not synchronize users with Essbase in CAS mode."
However, the database is created in Essbase. But when I try to connect to Planning web, it says:
"An error occurred."
I'm using SQL server 2005 as relationnal database.
Current OS: Windows Server 2003
When do I actually launch the configuration utility for regenerating the Planning properties file ? Once, the database is created via Desktop Planning.
Thanks for your help.

Hello John,
I don't have the error message with Planning Desktop, "Security filters" should not have been ticked. But now, I still have the problem with Planning Web => Blank page although the service is running.
http://localhost:8300/HyperionPlanning/
Here the HspEventLog contents:
=======================
Information*16*hpadmin*01/25/08 17:25:10*CHspDataSourceImp.cpp*Line 420*Entering CreateApplication: A_HPAPP1*
Error*16*hpadmin*01/25/08 17:25:16*CHspDataSourceImp.cpp*Line 19314*InitializeSQL failed*
Error*16*hpadmin*01/25/08 17:25:16*CHspDataSourceImp.cpp*Line 19330*InitializeDSMD failed*
Error*16*hpadmin*01/25/08 17:25:16*CHspDataSourceImp.cpp*Line 431*CreateApplication failed in Initialize*
Information*16*hpadmin*01/25/08 17:32:00*CHspDataSourceImp.cpp*Line 420*Entering CreateApplication: A_APP1*
Information*16*hpadmin*01/25/08 17:32:02*CHspDSSQL.cpp*Line 3255*Could not retrieve planning version*
Information*16*hpadmin*01/25/08 17:32:02*CHspDSSQL.cpp*Line 3326*Could not retrieve product release*
Information*16*hpadmin*01/25/08 17:32:02*CHspDSSQL.cpp*Line 3397*Could not retrieve product CSS Version*
Error*16*hpadmin*01/25/08 17:32:02*CHspDSSQL.cpp*Line 217*Version & Release not found*
Information*16*hpadmin*01/25/08 17:32:04*CHspDataSourceImp.cpp*Line 436*CreateApplication: Deleting old schema*
Information*16*hpadmin*01/25/08 17:32:04*CHspDataSourceImp.cpp*Line 450*CreateApplication: Recreating security tables*
Information*16*hpadmin*01/25/08 17:32:04*CHspDataSourceImp.cpp*Line 479*CreateApplication: Creating Essbase application*
Information*16*hpadmin*01/25/08 17:32:19*CHspDataSourceImp.cpp*Line 537*CreateApplication: Creating new schema*
Information*16*hpadmin*01/25/08 17:32:20*CHspDataSourceImp.cpp*Line 616*CreateApplication: Initializing schema*
Information*16*hpadmin*01/25/08 17:32:20*CHspDataSourceImp.cpp*Line 684*CreateApplication: Creating plantypes*
Information*16*hpadmin*01/25/08 17:32:20*CHspDataSourceImp.cpp*Line 796*CreateApplication: Creating application owner user*
Information*16*hpadmin*01/25/08 17:32:21*CHspDataSourceImp.cpp*Line 897*CreateApplication: Setting system config info*
Information*16*hpadmin*01/25/08 17:32:21*CHspDataSourceImp.cpp*Line 929*Exiting CreateApplication: A_APP1*
Information*16*RNARRAINSAMY*01/25/08 17:32:21*Hyperion Planning*SaveAppAssistant*Created application...now opening application...*
Information*16*RNARRAINSAMY*01/25/08 17:32:25*Hyperion Planning*SaveAppAssistant*Setting calendar...*
Information*16*RNARRAINSAMY*01/25/08 17:32:25*Hyperion Planning*SaveAppAssistant*Creating a scenario...*
Information*16*RNARRAINSAMY*01/25/08 17:32:25*Hyperion Planning*SaveAppAssistant*Done with everything!*
Regards,
Andy

Error message in the IDOC at item level

Hi,
Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
Regards,
Sujan

hi sivaprasath,
write the custme code as per your requirement so that it will do..user exit or badi .
~linganna

I am trying to download the new episode of Game of Thrones on my iPad. We are currently travelling in Italy and have an unlimited pre- paid data plan with the Italian carrier Wind. When I try download the episode through iTunes I get an error message

Hi there, traveling through Italy with my iPad. Purchased a unlimited prepaid data plan with Italian carrier WIND. Has been working excellent, but when I try to download a new episode of Game of Thrones, I get an error message which says that I have to connect to a wi fi network or download the episode on my MacBook. Why can't I download using the microsim and prepaid data plan? Any help will be great thank you!

Unfortunately downloads larger than 20mbps require wifi due to most carriers having data limits. This "requirement" keeps people who are not familiar with data and what takes up a lot of data from going over.

Error Message: Planning level is inconsistent

Similar Messages

Maybe you are looking for