Error message posted on next screen

Hi Friends,
I have a Maintenance View and I am using Extended Maintenance Events to validate some entries entered by the user in SM30. I am trying to display an error message when there is an error in the record entered by the user. It is one step maintenance.
This error message is being displayed on an other blank screen i.e. the program terminates and displays the error on other screen and the erroneous changes or new records are not created. My requirement is to display the error on the same screen and let user change the record entered.
Thanks
Braham

Hi,
I am using BEFORE SAVE event.
I am trying to show an error message.
Message e000 with 'Messsage'.
I tried
Message s000 with 'Message' display like 'E'. But this command is not accepted while activating the code. So was not able to use it

Similar Messages

Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mike

I'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!

Payroll's Error message: Posting balance is not cleared (period 02 / 2014 a)

Dear Experts,
I am new to SAP HR. And would like get help for this issue
After EHP 6 upgarde, when process the payroll, system prompt this error message: Posting balance is not cleared (period 02 / 2014 a).
Checked the RT and it showed that the tax employee deduction was RM90.93. But when it comes to payslip display the tax amount showed different figure of RM90.94 which might be the cause for “posting balance is not cleared” message

Hi,
ChecK Manoj Shakya's response in the thread.
Posting to FI-err :3G103, posting balance is not cleared
Cheers,
Manoj.

Handling Error message in Module Pool screen

Hi Folks,
I have developed a ALV report for table maintenace and I am calling the Dialog screen (small one) and Create and update the records of the Ztable through that screen.
Presently I am handling the error message in the main ALV screen .
My requirement is that I have to handle those error messages in small module screen.
How to do the same ?
Thanks.
Hemum.

crate message se91.
insert failure
if sy-subrc <>0.
message e001 with 'all readt exist'.
endif.

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.

Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

When I connect to USB port error message appears on computer screen and i tunes software shuts down. This is a brand new ipod shuffle.

When I connect my brand new ipod shuffle to the USB port I get an error message on the computer screen and the i-tunes software shuts down.

URGENT help please!!! I have looked everywhere on the internet and theres no information on anything

Error message posting Jounals

Hi!
I get the following error message twice when posting a journal:
"An error occured when parasing returned XML
Only one top level element is aloud in an XML document"
Despite the error message the data is sent to the database, the journal works but gives always an errror message and takes quite a long time to do and the posted journal isn't visualised on the screen but i find the journal I search for it.
I'm testing BPC 7 SP3 on SQL2008

Hi,
It looks like you have problems with the Journal templates. Please try to regenerate the template using the Journal wizard option. It will ask you to keep data into the system, so not problem regarding the data already registered. To be sure(if you are working on a production system), try to save all the jrn* tables from SQL server.
Best regards,
Mihaela

Error Message Posting a Non-PO Vendor Invoice

The instance is ECC 6.0.
While trying to post a non-PO vendor invoice, I am getting the below error message:
"RKEAK-FIELD(12) is not an input field
Parked document could not be posted 00 S 347 RKEAK-FIELD"
Does anyone ever bumped into the same error message or have an idea what is generating the error?
The issue started happening after one of the accounts in posting (Vendor Discounts) which is a CE was changed to post to Profitability Segment in OKB9. This error was not faced earlier when the account was posting to Cost Centers.
We are using new GL and Doc Splitting functionality.

Thanks for your reply.
I checked the note and it says the affected release are 3.0 D to 3.1G. But we are on ECC 6.0. Moreover, as per the note this is an issue with Tcode FB01, but I am using tcode FB60 for creating the non-PO invoice...
Please let me know your thoughts...

Need help in displaying error message on the same screen

Hi Experts,
I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
Please help.
Regards,
Sambaran Ray.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

While creating miro error message posting date 009 2011is not open

sir
while creating miro the error message is not open open for the posting date 009 2011

Hi,
The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

Error Message stays on the screen all the time

This message stays on my screen almost all the time. At the bottom it says "Press center to dismiss" but I have to press over and over multiple times to make it go away and then it usually comes right back anyway. The error message says "Firewire connections are not supported. To transfer songs, connect the USB cable provided." I don't have any other problems. It seems to be a bogus message and I can't get rid of it.

Have you tried these basic troubleshooting steps?
The Five Rs.

My AT&T Yahoo email gives me an error message saying that my screen resolution is too low, but it is at 1600 x 900. This only happens in Firefox, not in IE.

When I try to use Firefox to access my ATT.NET account I get an error message about my screen resolution being to low to support the site.My resolution is not low its at the highest available. I also use IE9 and do not have this problem. I am running Windows 7 and Firefox 15.0.1. This has been an ongoing problem. I am using a Toshiba laptop 15.6 screen with 4GB RAM. I see other complaints about this specific problem but have yet to find a solution. Thanks for your help.

Please see added comments on the question. Its not a zoom issue its all about the new ATT design email and Firefox, I agree with Noah there a bug between the old and the new and firefox only.
UPDATE:
I stand corrected. I went back in again and did the reset zoom and it appears to eliminate the error. Problem solved but I am not sure why I never set up zoom and didn't have the problem on any other site. Will it need to be done each and every time I go into that page or is it now corrected?

"Get Variants" button disabled after error message in AT SELECTION SCREEN

Hi,
In "AT SELECTION SCREEN" I throw an error message if certain criteria return no data.
After the error message is thrown, the button for choosing variants no longer appears to work. I click it and the variant selection box doesn't come up. It just changes the values that have been populated from red to black.
What is the code that remedies this? If an error is thrown, it should allow you to select a variant still.
Thanks,
Kevin

"AT SELECTION SCREEN" is not an option here. Let me clarify.
In START-OF-SELECTION, I call another program with a SUBMIT statement. That program uses a logical database. So it makes no sense to move this to "AT SELECTION SCREEN". Even when I did that, I still couldn't solve this problem.
If the SUBMIT statement returns no data (if sy-subrc = '4') then I need to go back to the initial screen. I need to display some kind of message, of type I or E or S, I don't care.
It just needs to go back to the selection screen and VARIANTS need to WORK, and you need to be able to SAVE the variants.
For some reason, if I get no data with the SUBMIT statement, I can display a message and get back to the selection screen but variants do not work. I've tried EXIT, STOP, CALL SELECTION SCREEN 1000 (the only one in the program), END LIST-PROCESSING, etc. NOTHING WORKS!

Error message posted on next screen

Similar Messages

Maybe you are looking for