Error message prevents further editing

Of course, after working for hours on a project, I'm now getting an error message that reads: You may be able to continue without any problems. You may also wish to save, quit, and re-launch iMovie HD.
Now, I can't make any alterations/edits, etc. to the file. I've copied it and renamed it, but to no avail. I have a copy of the file backed up on my external hard-drive, but I'd like to discover the problem.
Thanks for your expertise.

Hello and Welcome to the Discussions.
Posted below are some general tips that may assist.
First start off with a basic Uninstall of Apple software. This is listed in a particular order to reduce reboots. And you may or may not see everything in the list. If you run into issues during this phase skip to step 2
1. Uninstall the following programs
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-iPod Updaters
-Mobile Me
-Quicktime
-iTunes
*Reboot, then download and install iTunes
http://www.apple.com/itunes/download/
2. Follow the steps in the document below. It will assist with full removal of Apple Software and files. This does not touch the iTunes Music Library at all.
http://support.apple.com/kb/HT1926?viewlocale=en_US

Similar Messages

  • I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • Why do I keep getting error message from Digital Editions when trying to open it. Keeps telling me that it has encountered a problem and needs to close. I need this apparently to download a text book fro Proquest - need the text book for Uni work what giv

    Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????

    You are using ADE on Windows or Mac ? and their versions ??
    Please restart your machine and try once again.
    Thanks

  • Error message: Camera Raw editing is not enabled!

    Error message: Camera Raw editing is not enabled! in Bridge CS6. Images are jpeg files. Tried many suggestions from internet but still not working! Help please.

    Use the Adobe Cleaner Tool but first back up important files and read the instructions carefully.
    Try this link for the cleaner tool:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Your role no longer valid error message and cannot edit page

    Unfortunately I don't have access to the file, am asking on
    behalf of a
    friend who is skittish about his skills navigating a forum.
    His question is:
    When I open contribute, and select the website I want to
    edit..there is a
    yellow bar across the top of the screen that says "your role
    in this website
    is no longer valid. Click connect to update your connection
    with a valid
    one" so when I click connect, it goes through some screens,
    then it asks
    what folder on the ftp server the website is in? before there
    was this
    problem, I could get into the page I wanted to edit, and make
    the changes,
    then when I would hit the publish button the old page would
    show up..so I
    could make the changes but they weren't publishing..but at
    that point I was
    getting no error message???
    He's having those two problems.
    Any thoughts? I don't know diddly about Contribute. Thanks.
    Libbi

    Hi, This is because SSRS requires a Login to connect to the datasource to process the report when subscription will be occuring at its scheduled time. I would recommend you to store the credential securily into report server.
    GoTo: Report>Properties> Click on the Data Sources tab and you will see following options:
    a)A shared data source
    b)A custom data source
    Use option b) and click on option Credentials stored securely in the report server
    and provide credential information and further you can use options: Windows credentials and Impersonate the authenticated User if you require. Click on apply button.
    *You can use any option of them provided in first option(a) also using the shared data source which is having credential saved into report server.
    Once you have done with above you will be able to create subscription.
    Cheers Sunil Gure

  • Error Message Preventing Safari 7 Use

    I recently updated my software for my Macbook Pro to version 10.9.4. I tried to clean my Mac by deleting cookies, add-ons, and clearing the cache or whatever that is called. Now, as soon as I open Safari, I receive this error message multiple times, preventing me from using the app. The message continues to pop up in multiple windows and does not go away when I press "Ok" or exit the message. I am unable to do anything further with Safari and have to force quit the app. The message reads:
    To view the movie, open your browser in the 32-bit mode.
    1) in Safari, select Applications/Safari in the Finder and click more info.
    2) Ensure that Open in 32-bit mode is selected.
    3) Relaunch browser.
    However, I do not have a movie playing/a movie paused so I'm not sure why this pops up. I was able to follow the instructions of the pop up message and ensure that Open in 32-bit mode is selected; however, the message still pops up multiple times whenever I open Safari. I have to post this from Chrome because I cannot physically use Safari anymore. When I try to use chrome for watching shows or other things involving Java, it tells me I must download the player. Once I do that, nothing happens and I am not able to do anything with Chrome either. Please help me with the Safari issue.

    The Conduit plugin is malware, and the DivX plugins are crapware. All must be removed. I've never heard of "MoveNetworks Quantum Media Player," but that sounds like something you could do very well without.
    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine item from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Can pages be 'locked' to prevent further editing?

    I've created a website for our church and been updating it on my home computer. I expect to carry on for a while, but want to prepare for someone else taking it over.
    I also created two websites for our youth groups to work with and placed them onto the church laptop, (i did this by copying the whole iWeb folder, domain.site2 included, onto the lap[top) then deleted the church site from that file.
    Now, the youth have access to their own sites and edit them. When i add the official church site to the laptop, how can i prevent one of them from accidentally (or otherwise) changing/deleting some of our pages?
    Is there any way that I could keep the 2 domain.site2 files separate? I've experimented and can't get iWeb 09 to run by doubleclicking the domain icon, no matter where it is on my HD.
    Thank you
    Elizabeth

    Thank you, Roddy
    I read the info on the link you suggested but still have a question.
    If I duplicate the domain.sites2 file and make the changes so that I have 2 different domain files for 2 different sites, how does iWeb know which site to open when I run it?
    Currently, double-clicking the file gets an error message that iWeb can't read it and iWeb closes, yet when i next open iWeb it brings up the very same 'document' (for a better name) that it just wouldn't open.
    Elizabeth
    (PS I do have timemachine running so get regular backups ... now)

  • Error Messages popup in editable ALV

    Hello All,
    Iam working on Editable ALV  as a table maintainance for a Ztable and usng OOPs for that.
    Lets say i have material and plant fields for editing in ALV.
    If the user enters some junk value in the material field, its automatically getting validated and giving an error message with a popup.
    my question is, is there any way we can restrict this popup messages with error and have our own messages insted ?
    Appriciate your help in this.
    Thanks.

    check out this thread, where the poster wanted to append custom messages to the standard SAP messages... check otu the refresh_protocol method to see if you can clear out pre-existing SAP messages...
    Re: editable alv: add custom validation and display "errors" in protocol li

  • WD Drive Manager Services component error message MyBook Studio Edition II 2TB on iMac

    For five months I have been using a WD MyBook Studio Edition II 2TB in RAID 1 mode on a 27" iMac i7, 2.93 GHz, running Mac OS X 10.6.7, as a Time Machine connected via FW800.  Initial installation and operation was all good.
    Recently, the blue WD logo disappeared from the menu bar. I reinstalled the WD Drive Manager version 2.25 from the installation disk. The logo reappeared, however when selecting Launch WD RAID Manager from the menu an error message appears:
    "The WD Drive Manager Services component could not be found. Make sure the Drive Services component is running first."
    I removed the WD Drive Manager with the installation disk and reinstalled and tried again. No good.
    Tried again, this time using the USB connection with the same result. No joy.
    Tried using the downloadable version (2.25) from the WD website with same results.
    Searching Google lead to no hits on anything remotely related for a solution.
    So, at this point, I cannot confirm that the drive is actually in RAID 1 mode. It shows up in the Finder as a 1TB drive with 268 GB used.
    How can I restore a working version of the WD Drive Manager?
    WD Tech Support has escalated the issue to programmer level but without a successful solution. They suggested I post here as well to see if any other Mac users may have had this problem and have found a solution.
    Thanks for any assistance or referral.

    Unfortunately you probably will not find very many if anyone using WD Drive Manager here, most of us are using a variety of backup strategies that include Time Machine, an on-line backup and a Bootable Clone made with CarbonCloner or SuperDuper.
    The no-worry backup plan | Business Center | Working Mac | Macworld
    Dennis

  • Error message when running editable alv

    Hi all,
    I hava a problem with an editable ALV. I created it with the following method wddoinit:
    METHOD wddoinit .
    initialize ALV Component
      DATA: l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
      l_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
      IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
        l_ref_cmp_usage->create_component( ).
      ENDIF.
    Get model data
      DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table .
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      DATA:
      l_value TYPE REF TO cl_salv_wd_config_table.
      l_value = l_ref_interfacecontroller->get_model( ).
    set read only mode to false (and display edit toolbar)
      DATA: lr_table_settings TYPE REF TO
      if_salv_wd_table_settings.
      lr_table_settings ?= l_value.
      lr_table_settings->set_read_only( abap_false ).
    set cell editor for input fields (~make colum editable)
      DATA: lr_column TYPE REF TO cl_salv_wd_column.
      DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
      lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
      lr_column_settings ?= l_value.
      lr_column = lr_column_settings->get_column( 'SAMPLE' ).
      CREATE OBJECT lr_input_field
        EXPORTING
          value_fieldname = 'SAMPLE'.
    lr_column->set_cell_editor( lr_input_field ).
    ENDMETHOD.
    But when I run the Web Dynpro Application I get an error message with the note:
    "Access over "Null" Object Reference not possible" ( I translated it from german to english )
    The error occures in the line:
    lr_column->set_cell_editor( lr_input_field ).
    But what is wrong?
    Thanks for your help!!
    Regards
    Ingmar

    Sorry. I'm stupid. I didn't the "Sample" for column and field!!!
    But:
    How can I reach that not only one cell is editable, but the whole table? And how can I save the data that I put in, when I add a new line?
    Thanks!!

  • I get error message DB745 with EDIT ALV on a field type DEC?

    Hi,
    I have an ALV which has a field type DEC.
    The ALV is open for edit.
    Once I put negative number in, I get the error message DB745.
    This error is retrieved from SAP code and I do not see any reason why.
    I checked the field cat and it looks fine (ref to a field type DEC).
    I am using lcl_grid_event_receiver with method: handle_data_changed FOR
    EVENT data_changed OF cl_gui_alv_grid.
    In that method I get the error in er_data_changed->mt_protocol.
    There is no problem to show negative data if it is saved in the database
    as negative.
    Can anyone throw ideas how to fix that?
    Thanks,
    Itay

    If you simply check the domain WERT7, you'll see that the checkbox for "Sign" is <b>not</b> checked. Therefore negative numbers are <b>not</b> allowed.
    Just because a field is decimal or currency does <b>not</b> mean that negatives are allowed.
    Many times, the sign is handled by a separate debit/credit indicator field such as a field with a domain of SHKZG.
    Rob
    Message was edited by:
            Rob Burbank

  • Error Message with Flex Editing (Elastic Audio)

    Hello....
    We have a song project where we are currently grafting in bass tracks to suit the existing drums. The drum sections (verse, chorus, etc) were all recorded piecemeal one section at a time in their own unique projects (btw, everything has been tracked in LP9). Once the drum sections were completed, I then "Flexed" them and then imported all of those drum tracks into a new "Master Assembly Plant" project where mixing would begin. So far so good. In this "M.A.P." project I have penciled in the required tempo changes (via the global tempo track) and I have noticed that the new Flex Editing feature gets completely confused when a Region with Flexing is placed somewhere overlapping where there is any sort of tempo change. I am assuming that when Regions are analyzed for Flex markers that Logic embeds the tempo info into the region. Many of our drum sections were tracked at 117 BPM. Some were faster, some slower, as the song required. So when I assemble these various drum regions into the "M.A.P." project, anytime one of those regions overlaps a tempo change point, all sorts of havoc begins. The workaround we have been using is to snip the region at the same point where the tempo change occurs and then exclude Flexing for the part of the region that overhangs into the new tempo. Seems to work, albeit certain Regions then give up the Flex. Not a problem but that sort of defeats the purpose of having Flex Editing, yes? Once I got the drum tracks to my liking I then bounced out a rough mix for a guide track for the bass player to begin tracking bass.
    So to make matters a bit more tricky, we have been tracking electric bass parts against that new rough mix bounce of the drums, and in order to keep things tidy, I copied the tempo changes/data into the bass tracking project. This is where the real trouble has begun. If a bass section starts at say 117BPM and then needs to gradually bump up to 125BPM, the metronome click is fine, the rough mix drum bounce is fine, and the bass is as recorded. But when we try to Flex the bass track Regions, the audio wave forms get all moved around randomly. Turn the Flexing off and all is back to normal. But for some reason Logic doesn't want to Flex in time with any tempo changes. Again, I'm guessing the tempo a recorded Region began in is somehow embedded into the Region? So a Region that starts in 117BPM but ends in 125BPM is only Flexed as if the entire Region is at 117BPM? When the tempo begins to change the Flex/Transient Markers get all screwed up and confused. Also, Logic chokes (although the audio keeps rolling along just fine) and it gives me this error message:
    *+Logic Pro:+*
    *+Unexpected request for audio data.+*
    *+See console. (Elastic Audio)+*
    (-10024)
    Anyone else run into this issue?
    I'm on a 2.4 Core2Duo MBP running Leopard (latest but not SL).

    I have also experienced this, and gotten that same error message. And yes, this was in songs with some tempo changes.
    It appears, at this point, that flex editing is NOT possible on regions recorded with tempo changes in the Logic song.
    The recorded audio always plays fine, but as soon as you analyze it for flex editing, the markers are everywhere BUT the transients, and the track plays completely out of sync.
    Its a mess... does anyone at Apple listen to, or create music that isn't 4 on the floor? Just wondering...

  • Unknown Error message appearing when editing Nikon D810 files on Lr 4

    Hi Guys,
    Recently bought a Nikon D810 and whenever I import files and have a play around with them Lightroom will freeze and then come up with the Unknown Error message. Just wondering if anybody else has encountered this and if so, what you have done to rectify it?
    Thanks in advance,
    Pete

    Then they must be using Lightroom 5. According to the list of supported cameras, support for the D 810 was added in Lightroom 5.6. I seriously doubt that any of your friends are actually using it in Lightroom 4 Unless they are using software to change the camera model in the exif data.
    Camera Raw plug-in | Supported cameras

  • Photoshop Elements 5.0 error message prevents opening entire program

    Have Photoshop Elements 5.0 running for years on laptop with Windows Vista.  Now won't open program and gives error message: attempt to access invalid address.  Same after removing program completely and reloading from original disk. How to fix and use program once again?

    Can you post the exact content of the error message, including the title of the error message box?  A screenshot would be best.
    Ken

  • Annoying error message prevents me from re-opening projects in Premiere CC 2014

    This is the error message I get every time I re-open an old project in Adobe Premeire:
    'This project contained a sequence that could not be opened. No sequence
    preview preset file or codec could be associated with this sequence type.'
    I'm on a Creative Cloud team membership (at Conde Nast). This started happening when I upgraded from Premiere Pro CC to the newer 2014 version.
    I can start a project, start work on it, but when I close it and try to re-open, the message above appears.
    I can work around it by starting a new project and importing the timeline from the original project, but the second project has the same issue when I re-open
    that, so I'll have about 10 versions of each project I'm working on which is ridiculous!
    I've google this problem a few times and have noticed quite a few other users experiencing the same problem.
    I've also tried the work around where you change the code in a text editor for each project, but that becomes really tedious also.
    Can anyone tell me if Adobe has fixed this yet????
    And if not, WHY NOT???
    Kris

    Hi,
    Which Operating System are you working on?
    We need to move the SLStore and SLCcahce to the desktop.
    For Windows: C: Program Files*86: Common Files: Adobe: SLCache
    C: Program Data: Adobe : SLStore
    Thank You
    Arjun

Maybe you are looking for