Error message printing a production order

Hi all,
We are using MTO and have configured the scheduling profile so that the order is printed as soon as it is released. However I've noticed that the order is not being printed and once it is released we ahe the following message:
"CO: Program PPCOXPR1 Create missing parts index from table RESB Program run not necessary Program already run ".
The same message appears when I try to print the order with CO02 or with CO04.
Please help!
Thanks

Hi,
Can you Check the Settings in OPK8 t-code and Remove the program PPCOXPR1 from print program if it is set
Thanks,
Rajanikanth

Similar Messages

Error in printing the production order in TCode COHV

When i tried to print the production order in COHV transaction code the system prompts me an information message as order is printed but it is not generating any spool request even i am not getting the print too.
This error persist for few orders only.For the other Prod order these transation works fine.
Can anyone help in this issue.

Hi,
COHV is for MASS PROCESSING please try with CO04N for PRINT.
regards
R.Brahmankar

Error Message for new production order type

I have created a new production order type and gone through all the configuration requirements that I'm aware of. In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
No reference document type defined for order type ZRWK
Message no. CO179
ZRWK being the new order type.
I've searched through many posts and found nothing relating to this message. Hopefully someone has encounted this before.
I'm sure I've missed something, but can't pinpoint what it is.
Help is greatly appreciated.

Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
The path is Print - Print Settings - Configuration Menu.
Diego

Error message while creating production order with KMAT material strategy25

Hi PP Gurus I am running variant configuration cycle...Strategy 25, Custermer Req KEK (KMAT Matrl)
Sales order & MRP Picked the components correctly as per the dependencies
written. So Planned order generated against sale order.
When I tried to convert planned order to Production order...I am getting the
below error message..
Error Message:
You cannot make an assignment to make-to-order stock Message no. CO684
Diagnosis The component cannot be allocated to an individual stock because
make-to-order production and engineer-to-order production cannot be executed
with this order.
A possible cause is that you are trying to create an order with reference to a
sales-order/project, where an account assignment to a sales order/project is not
allowed in the settlement profile that is assigned to the chosen order type.
This is inconsistant.
System response The following responses are possible:
Order processing is cancelled.
The system resets the special stock indicator back to the original value.
Procedure Choose another order type.
I used order type with SD1 as settelement profile.
OVZG: default 046, settlement profile = SD1
OPJH: Settlement profile = SD1
Plz through some light on this if u have worked on Variant Configuration/MTO
settlements.
Question:
1) Is creation of production order with KMAT material supported by SAP?
2) If yes, why the above error occurs?
Waiting for Ur reply
With Best Regards

Dear R.Brahmankar,
I have check on the note, but it is not relevant to ecc6. The current system default setting is :
Standrad setting for reqt class 046
Special Stock E
Acct Assgt Cat. M
Valuation M
Settlmt Profile SD1
However if I change the Acct Assgt Cat. from M to E. It resolve the problem. I would like to know is this the right solution?
Config in Acct Assgt M
Consumption Posting = E
Config in Acct Assgt E
Consumption Posting = ' '
In F1 key of Consumption Posting field it shown following:
To flag the sales order item as cost- and revenue-carrying, enter an "E" (settlement via sales order).
If you do not wish to flag the sales order item as cost- and revenue-carrying, do not enter anything.
Dependencies
If you are working with nonvaluated sales order stock, always flag the sales order item as cost- and revenue-carrying.
If you are working with valuated sales order stock:
In the case of complex make-to-order production, flag the sales order item as cost- and revenue-carrying
In the case of sales-order-related mass production, do not flag the sales order item as cost- and revenue-carrying
Should we change to E?
Regards,
Ong

Price error message while creating production order- Urgent

In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
Thanks

Please confirm where i should check for Activity price?
But then why we are able to get error message.
Reexplain:
Creating a production order which do not have standard cost in material master.
While saving, getting a error message'No price could be determined.......'
Now changing the message to Warning through configuration using TC: OPR4_PPCO
Now again creating the production order and saving
Expectation to have same message as warning but not getting anything.
Thanks
Edited by: vineet garg on May 1, 2008 12:14 AM

Error message while confirming production order.

Hi Gurus,
I would like to know if it is possible to get an error message when we try to confirm a production order if there is not a cost for each component.
Please provide details if any.
Thanks for your understanding.
Naveen.A

Hi,
You can have setting for error message for incorrect costs in confirmation as below :
Go to OPK4 ( Parameters for order confirmation) select plant & order type--> General individual entry ( tab)-> Error handling/logs
Maintain tick in check box for Termination for Incorrect ActCosts.
This will fulfill your requirement.
Revert in case any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Apr 6, 2009 7:17 AM

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error in printing a Production Ordre

Hi all,
I need to print a production order more than only one time, but the system block me advising with the following error:
""Réimprimer ordre" non autorisé (ORD 1000094 )
N° message BS002
Diagnostic
L'opération « Réimprimer ordre » n'est pas autorisée pour ORD 1000094 car aucun statut autorisant de façon explicite cette opération n'a été défini.
Activités système
Il vous est impossible d'exécuter l'opération « Réimprimer ordre ».
Procédure
Vous pouvez exécuter cette opération si vous définissez un statut utilisateur qui autorise de façon explicite « Réimprimer ordre »."
The error doesn't occur if I log in Italian or in English languages, but I need to work for a French customer.. How can I solve?! What have I to do in customizing?
please help me,
Valentina

Dear,
You can reprint the order through CO04N here select reprint.
Please refer this link for error message BS002 Reprint order" is not allowed,
Re: How to reprint a production order?
I hope it will solve your problem. If not then come back.
Regards,
R.Brahmankar

Error message "print head failure"

My photosmart 7520 has suddenly shown error message "print head failure", I have followed the cleaning instructions on the hp website, pulled the tabs out on each cartridge & made sure they clicked in correctly. The printer is only about 8 months old. Help!

Hello Effi,
Welcome to the HP Forums.
I see that you are having an issue with the error "print head failure".
I realize that you have already stated that you did some cleaning advised from a document that you used from the HP web site.
I do however have a few other steps that I suggest we try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with the following error 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print a Production Order

Hi,
In another System I can't print the Production order.
I recieve this error.
Element ROU_TEXT_SHORT window MAIN is not defined for form PSFC_PRINT_LAY
Element BARCODE_AUFTRNR_MATNR window MAIN is not defined for form PSFC_PRINT_LAY
I am not a programmer but I would like to know if the problem can only be resolved from a programmer or if I have any possibilities to customize the system so that it works.
Thanks
Dede

Hi,
Consult your ABAP consultant, he will help you. Since this is a functional forum, we will not be having the idea on technical.
Regards,
V. Suresh

Error message 'printer offline'

error message 'printer offline' when I try to print from my laptop, but prints from my ipad - officejet pro 8600plus.
the ite will then print randomly 1/2 hour or days later.

What are you trying to print and what is your operating system on the computer you are using? Does it take a long time to print from your computer or the iPad? Have you had this issue for long?
For now I am going to recommend we remove and reinstall the software onto your computer as a preliminary step.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4323648
Install that and let me know the result!
Have a great day!

Error during release of production order - AFS Specific

Hi SAP gurus,
Iam getting error during release of production order in AFS specific system during COHV transaction. Error is ''Error calling ATP server'' and message no is AG022. But when we read the PP master data then this error is cleared and production order is released.
Thanks & Regards,
N. Laxman

hi
1. When mass conversion of AFS planned order to production order is performed via COHV, the resulting production order does not contain the SKU details of the component.
2. When a planned order is converted to a production order & an ATP is carried out on the production order, Message no.AG022 - 'An error occurred during Remote Function call on the ATP Server' is issued by the system.
so you need to use the note 1087613.
read the note and apply with the help of technical team ABAP and BASIS
-ashok

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error message while viewing Purchase order summary

Hi all,
we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
is it beacuse of currency not popluated in Purchase order?
Verified metalink note - 960504.1
Thanks
Kiran

Hi Kiran,
Verified metalink and other areas but could not get any appropriate solution.
I tried to reproduce the issue in various available environments...but no luck!
My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
Please check with your DBA for this patch in test instance.
Thanks
-Arif.

Error message printing a production order

Similar Messages

Maybe you are looking for