Error message "Product Recovery Function" removed

Greetings
Hi all........I am in a big trouble at this moment.I have installed OS XP which i am having from university. I am trying to reinstall my original Winxp using Rescue & Recovery 3.0. I repaired my MBR using MBR repair diskette and installed RnR 3.0. After that when i pressed F11 key it enters in rescue and recovery but when i click to bring my laptop to original factory state it gives me an error "Product Recovery Function removed from the system". I am service partition is still intact with the hard disk. It would be really helpful if someone can share his knowledge and experience.
thanking in advance
yogesh

Hi,
The recovery DVDs from Lenovo should get you going.
Are you trying to shrink the C: partition from within Windows? It's probably the page or hibernation file that is the problem. If you want to keep trying while waiting for the DVDs you could try an off-line partitioning tool. gParted on a Linux live CD or USB flash drive for instance.
There is some cloning software that can do a shrink during the clone op - Acronis for instance.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

The Product Recovery function has been removed from this system

I get the following error when I try full system restore - "The Product Recovery function has been reomed from this system"?
How can I fix this?

welcome to the forum:
Have you made a recovery media before this problem occured??? if you haven't you may need to call Lenovo and ask for a set of recovery disks, or just use your own XP/Vista OS you got from somewhere, and load it on your machine then enter you own serial number that come with your machine.
Then proceed to download the various softwares and drivers applicable to your machine, the most important that you won't have is the predesktop area, if you think this is unacceptable then call Lenovo and obtain recovery media from them (a nominal handling and service charge of around 50 USD will be charged).
http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=%2Fproductselection%2Fla...
fill in the detail and download away.

Error message: 1021: Duplicate function definition.

Hi All,
First let me start by saying that I know next to nothing about Flash. I have inherited a website maintenance project that has a Flash rotating image banner. I have managed to get the images to fade-in and fade-out correctly, but now I need to make these images clickable - linking images to pages in the website. I have read many posts here and have reviewed the video tutorials. I have been able to get the first image clickable using this AS3 action:
mars_btn.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent) :void {
        navigateToURL(new URLRequest("http://somewebsite/mars.php"));
        trace("I'm clicked");
However, when I attempt to make another image clickable by using a different instance of a button I get the error message:
1021: Duplicate function definition.
I have a separate instance of a button with this AS3 action:
jupiter_btn.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent) :void {
        navigateToURL(new URLRequest("http://somewebsite/jupiter.php"));
        trace("I'm clicked");
Obviously I'm not understanding how I'm supposed to do this so that I don't create a duplicate function definition. Any help would be most appreciated.

excuse me , I have a question i hope that you help .. ( im new in here )
we were asked to create an interactive application on flash in two languages..
so i created two different fla files same exact codings ... i was wondering how can i combine them so the viewer can be able to choose the language from a button ?
when i try to combine them i get lots of errors of duplications in the actionscript
PS : MY MAIN PAGE INCLUDES A CAROUSEL with images ..
I was thinking of saving one of the fla as a movie and then add it some how to the second fla and combine it with a button but i can't figure it how..
i hope i was clear enough.. but is there any possibility to help me please ?!
when i tend to change names or something it creates error.. ( IM NOT A PRO IN AS3 ) and when i dublicate the scenes it give duplication errors.. WHAT IS THE SOLUTION ??
this is the code of the actionscript in the main page.. ( the carousel's code i took from someone ) and i used it on my project
import com.ccanvas.carousel.*;
var centerX:Number = stage.stageWidth/4;
var centerY:Number = stage.stageHeight/4;
var carc:Carousel = new Carousel(centerX, centerY, 256, 75, "icons.xml");
carc.addTooltip(new tooltip); // use 'tooltip' movieclip for item tooltip
addChild(carc); // add carousel to stage
function down(event:MouseEvent):void {
trace(event.currentTarget.toolText); // simple click interaction
function destroyCarousel(event:MouseEvent):void {
carc.destroy(); // remove all item in carousel as well as tooltip
function removeNextItem(event:MouseEvent):void {
if(carc.numOfItems > 2) {
carc.removeItem(2); // remove the item next to the remove item icon
create.addEventListener("mouseDown", createCarousel);
function createCarousel(event:MouseEvent):void {
if(carc.CREATED == false) {
// recreate the carousel
carc = new Carousel(centerX, centerY, 256, 75, "icons.xml");
carc.addTooltip(new tooltip);
addChild(carc);
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Tools_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene);
function fl_ClickToGoToScene(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Toolse");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
games_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToGames);
function fl_ClickToGoToGames(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Gamese");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Identity_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToIdentity);
function fl_ClickToGoToIdentity(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Identitye");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Reviews_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene_13);
function fl_ClickToGoToScene_13(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Reviewse");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Facts_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene_20);
function fl_ClickToGoToScene_20(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Factse");

Factory restore error message - "Product Restore %s failed to restore your system"

While doing a factory restore I am getting the error message - "Product Restore %s failed to restore your system".
Not sure what it means ... I am on a Lenovo 3000 N100. I've been having not so much battery won't charge as battery won't stay charged problems.
When starting up with the battery in ... the battery seems to bedrawing so much from the adapter the N100 shuts down.
While shutdown the battery seems to draw from the cmos battery.
When I power up again the cmos battery is drained ... the bios clock has to be reset.
A few times like this and I took the battery out and just ran on the adapter.
Taking the battery out didn't stop the n100 from timing out(read turning off). What did stop it
is going into the memory panel when its off and power is diconnected and shorting the Cmos battery.
Then when powered up it goes straight into loading the recovery package and actually
gets to the point where it is ready to format the disk before it gives me the message - "Product Restore % failed to restore your system".
Last night I actually got it to factory restore ... but then like a complete idiot I put the battery
back in thinking the restoration would have resolved the charging problem ... it didn't.
I know ... I know ... I'm a couple of months too late for a new battery ... but if anybodies got any ideas
how to get around this ""Product Restore %s failed to restore your system"" so I can get back
to windows I'd appreciate it.

I've had a similar problem when attempting a restore to factory settings on my Lenovo 3000 N200, running Windows XP. I resolved it by leaving the battery plugged in, but by disconnecting the AC power adapter. Then when the restore was up and running I then plugged in the adapter so the laptop wouldn't run out of power before completing the restore.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

XML errors message (Product key not found/Invalid) in SNC5.1

Hi,
I am working on SNC project which includes POC scenario.I have completed all the required configuration in R/3 4.6c and SNC5.1 system. The master data (mat, plant,vendor and Info records) are CIFed from R/3 to SNC, BP and MoT created in SNC. All the MD BAdIs are implemented in SNC. I am trying to post a PO from R/3 to SNC, IDOCS are successfully generated, PI has converted the IDOCS into XML messages, but i am getting XML error in SNC system (sxmb_moni) which states-
1) Product key 000000000123456 (category ID) not found
2) Item 00001: Product is missing or invalid
3) Order, item 00001: Product 000000000123456 does not exist
4) BOL processing failed. XML-message inbound processing has been terminated.
I am able to post the PO successfully in SNC Web UI which has alpha numeric product number (eg- 1120-110), but products with numerical value leading zeroes (eg- 000000012345) do not get posted. These product IDs give error in SNC sxmb_moni.
I have set up the output format of product number with 40.
Appreciate your help.
Is there any kind of configuration required for leading zeroes in any of the systems (R/3,PI or SNC)
Appreciate your help.
Regards,
Edited by: Dmohite on Jun 11, 2009 11:09 PM

Hi Bharath,
Were you able to over come the error for products in the XML message? I have same issue, can you please briefly point me in right direction?
I am facing the error message " Product key 0000000000xxxxxxx (category ID) not found". can you please briefly mention how did you resolve?
In my case, the XML message had product number '000000000070000598' and I tried to implement BAdI to make the product number appear as '70000598' and still it failed.
Thank you in advance
Best regards
Vivek
Thank you in advance.
Best regards
Vivek

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up.

I upgraded to Firefox 3.68 about four days ago. After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up. I click "OK." Nothing seems to happen, either good or bad.
I installed Comodo Internet Security a few days before I upgraded to Firefox 3.68.
== This happened ==
Every time Firefox opened
== After I upgraded to Firefox 3.68.

I am the original poster. The problem seems to have nothing to do with my upgrade to Firefox 3.6.8 but with a configuration change I made to System Mechanic after I switched to Comodo Internet Security.

SL500, Product recovery function has been removed from this sytem

I upgraded my SL500 from Vista to windows 7 OS several years ago and lately the OS has been acting weird (freezing, very slow at times) so I am thinking something is corrupted somewhere and want to restore it back to the manufacturers state. However, when I try to do this through rescue and recovery, it tells me that the recovery function has been removed from the system. I'm assuming that when I upgraded from Vista that R&R was no longer compatible so I installed version 4.5. My laptop did not come with backup OS disks and was told that this was the way to restore the system back to the factory state. How do I do this if I'm getting this message?

http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62978
try this. If this don't work then you would to reinstall the OS using the T43 recovery media disk set.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Error message during recovery reformatting hp mini 110-3030nr

ordered the recovery usb for my hp mini 110-3030nr trying to format but when its trys to write recovery files I get this error message. copy file fails From: D:\preload\base.wim To: C:\RM\Image\base.wim Please help
product number WQ809UA#ABA

Hello mtkrass.
Have you tried using a different USB port to perform the recovery? The error refers to it having issues reading files so that would be a possible solution. If you're still unable to get the notebook to read the files you need to contact HP Support again and let them know. There is a possibility the image is corrupted or damaged.
The number for HP Support is 1-800-474-6836 for US/Canadian customers. If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
Have a good day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP Pavilion Laptop: Unable to open files, error message and "Recovery" drive appeared

My fairly new HP Pavilion AR5B1425 laptop suddenly displays a big red x and an error message "documents.library-ms (or whatever file I'm trying to access) is no longer working" and is displaying a "recovery" drive listed as "D." My kids were using my computer, and hubby thinks they inadvertently reset my hard drive or something. Any ideas?

Hey reedmiarecki,
Welcome to the HP Support Forums!
With the error message that you are getting, your only option would be to do a factory reset of your computer. If you do need assistance on how to complete a factory reset of your computer, please provide me with the full model number. This will allow me to provide you with specific steps. If you need assistance in finding the model number, please take a look at the following document Guide to finding your product number.
Good Luck!
I worked on behalf of HP

Windows Installer error message when installing or removing iTunes

When I try to either upgrade, install, or remove iTunes, I get this message:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
Anyone know how I can fix this?

Microsoft have this help article on this error message;
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q315346#kb1

Error message in planning function

Hi,
I have implemented a plausibility check for values in a planning function:
IF { Z6SLSPRIC } = 0 AND NOT {Z6SLSQTY} IS INITIAL.
     MESSAGE E000(ZOP1) .
     MESSAGE E001(ZOP1).
     MESSAGE I003(ZOP1).
ENDIF.
With raising an error message the data will not be saved. Unfortunately the function sends the message '...ended with errors'. I think this is the cas because of raising an error message. How is it possible to raise an error message without getting the function standard message?
Regards
Andreas

Hi,
I think the syntax is correct. The function works and give the implemented messages without saving the data.
After that I get the following message: "Planning function Z6OPF4 ( Z6OPF4 ) ended with errors".
How is it possible to suppress such system messages?
I think the function is working fine. The message mentioned above is the result of raising an error message in my code...
Regards
Andreas

Error Message on the printer - Remove and check right cartridge

How to fix error message: "remove and check right cartridge" which you have done numerous times, plus cleaned cartridge nozzle. Also, I have turned off power to printer, but nothing changed. Help for HP Officejet 7210 All-in-One needed.
This question was solved.
View Solution.

Funny that multiple people have this problem appear just after 9/1 on multiple printers/all-in-ones. I wonder how many people have this problem and don't report it here. Mine is on a 2710a all-in-one in excellent condition except for this cartridge problem.
My contacts are not suddenly damaged and it is a relatively new well within the expiration date genuine HP cartridge that we have had for more than a few months. It has not been out of the printer nor has the printer been moved. It sits in a clean room with very little temperature variation from 72 degrees. All printers should be so lucky.
This is not the first time nor the first printer I've had cartridge problems with HP printers. This is my third one and I'm done with HP printers. I love all other aspects of the printer but this one is infuriating enough to sour me for good.

Error message when using function module HRIQ_TESTRESULTS_CREATE

Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL:           01
OT:          ST
OBJID:     Student ID
TESTRESULTS_HEADER:
ISSUEDATE                      08.02.2010
VALIDDATE                      30.04.2010
TEST_GUID
TESTEO                         50000269
TRANSEO                        00000000
TESTTYPE                       EXAM_UB_ING
SESSIONID                      T1
SESSIONYEAR                    2010
ENTRYDATE                      08.02.2010
TESTPASSFAIL
TESTTOTRES                     458
TESTSCALE_ID
TOTALPERCENT1                   0,00
TOTALPERCENT2                   0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID            GRAMMAR
SUBTESTTRES      GRAMMAR
SUBT                     203
SUBTESTID            READING
SUBTESTTRES      READING
SUBT                     120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
Araceli

Araceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh

Error message "Product Recovery Function" removed

Similar Messages

Maybe you are looking for