Error message - pulling hair out

Hi forum
I am pulling my hair out.
Every time I start Prem Pro I get the following message
“Prem pro could not find any capable video play modules – Please update your video display drivers”
Now this started suddenly yesterday and I have been using the programme all last week for a job I am half way through with no issues. It was very sudden
I am running vista 64 bit and an ATI radeon X1050 graphics card. 4GB ram
I have tried following
1/ disable anti virus and firewall - no
2/ system restore - no (twice)
3/ update video driver - no
4/ uninstall and reinstall cs4 suite
5/ msconfig - startup with no other applications or services - no
6/ kick the machine - no !!!
I am really at a loss. I have seen a couple of forums on the web covering this subject but so far nothing has helped me.
Any ideas please
Andy

Andy,
3/ update video driver - no
As per the error message's text, this would have been my guess. Now, did you update with the latest driver directly from the ATI site? Can you roll-back to an earlier driver and try that? Can you check to see that your vid-card is, in fact, using the newly installed driver? Sometimes, installing an updated driver is not the most simple of tasks. With Matrox, one must first remove the old driver, reboot, then install the new one - don't know if that is still true. However, each site should have specific instructions on the exact steps required.
When things like this change, it's often some hot-fix from MS. Some can be rolled-back with System Restore, though a few cannot. Often, these will fritz both Audio and Video drivers quickly.
Though less often a fix in PrPro, than in PS, you might want to Move your Prefs files, and let PrPro rebuild them. You'll obviously have to change them, should you have any custom settings from default. Again, this is seldom necessary in PrPro, but happens to fix many PS problems.
Nothing else that I can think of right now.
Good luck,
Hunt

Similar Messages

Trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out dis

trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out disc

copy the disc contents to a desktop folder and click setup in that desktop folder.
if that fails what ps version are you trying to install and what is your os version?

Image Manager : upload image - error message String index out of range

Hello,
i'm facing an issue with the upload functionality of 'Image Manager'.
When i upload a file, systematicaly an error message pops up :
"error message String index out of range : - XXX"
Where XXX is a value as large as the size of the file.
I have the feeling that the problem may come from the installation of VC.
Did someone encountered this issue ?
Thank you

Hi,
Plz check the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
Govindu

TS3694 pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,itunes logo. pls

pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.

no help for jailbroken phones here-it's not allowed. good luck.

QL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of

Dear all,
please help me4 on this
i am getting this error
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
my logs are:
sapinst.log
ERROR 2011-12-18 09:40:34.550
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-12-18 09:40:34.558
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-12-18 09:40:34.717
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
INFO 2011-12-18 09:57:09.852
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase".
INFO 2011-12-18 09:57:15.747
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2011-12-18 09:57:16.545
Creating file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
oracle_sql_results.log
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Dec 18 09:40:34 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/PRD/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-12-18, 09:40:34 SAPINST ORACLE stop logging
alert_prd.log
Sun Dec 18 09:40:34 2011
Starting ORACLE instance (normal)
Sun Dec 18 09:40:34 2011
WARNING: EINVAL creating segment of size 0x000000d8001b2000
fix shm parameters in /etc/system or equivalent
please sujest the solution very urjent pz........

Dear deepak
itried to start the database manually
but it is not working.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
SQL>
and my shm parametrs for the Solaris ACCORDING TO NOTE 724713 are
projadd -p 333 -c "SAP System PRD" \
-U prdadm,oraprd \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
dr
projmod -s \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
user.root
prdadm::::project=dr;oraprd::::project=dr
thanks & Regards
k.Phani Krishna

Slowly pulling hair out

I have tried everything that itunes suggest for error code 3194 and nothing is working, my daughter put a password on her phone that she forgot but this error message is stopping me from restoring her phone, please someone help me as i am slowly pulling alll my hair out. We have 3 iphones and cannot update or restore any of them. we run norton 360 and someone said that could be interferring with itunes but it all says itunes is running properly. PLEASE HELP!!!!!!!

the phone hasnt been jailbroken has it? I found this on a website
Error 3194
Occurs when trying to install an old firmware and Apple's server disallows the installation.

Printing all error messages in the out put report

Hi all,
I have MATNR and WERKS data in final internal table now my requirement is ineed to print all the error messages for all the materials (where sy-subrc ne 0) in the out put report. how can i do it for multiple error records will anybody tell me with coding
The Requirement is like bellow:
Take material number(s) (MARC-MATNR) from selection screen then check to see if any plants have that material setup as QM active (MARC-QMATV). If no, then issue message on report.
Thanks,

Hi Mythili,
Hope the attached code helps you...
TABLES marc.
TYPE-POOLS: slis.
TYPES : BEGIN OF g_ty_msg,
        type LIKE sy-msgty,
        msg(120),
       END OF g_ty_msg.
TYPES: BEGIN OF g_ty_marc,
        matnr TYPE matnr,
        werks TYPE werks_d,
        qmatv TYPE qmatv,
      END OF g_ty_marc.
DATA: g_t_msg TYPE TABLE OF g_ty_msg,
      g_r_msg TYPE g_ty_msg.
DATA: g_t_marc TYPE TABLE OF g_ty_marc.
FIELD-SYMBOLS <fs_marc> TYPE g_ty_marc.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
                s_werks FOR marc-werks.
START-OF-SELECTION.
SELECT matnr werks qmatv FROM marc
    INTO TABLE g_t_marc
    WHERE matnr IN s_matnr AND
          werks IN s_werks.
IF g_t_marc IS NOT INITIAL.
    LOOP AT g_t_marc ASSIGNING <fs_marc>.
      IF <fs_marc>-qmatv IS INITIAL.
        g_r_msg-type = 'E'.
        CONCATENATE <fs_marc>-matnr <fs_marc>-werks
          INTO g_r_msg-msg SEPARATED BY space.
        APPEND g_r_msg TO g_t_msg.
        CLEAR g_r_msg.
      ENDIF.
    ENDLOOP.
ENDIF.
END-OF-SELECTION.
PERFORM display_log.
*&      Form display_log
      To display error log as an ALV Popup
FORM display_log .
CONSTANTS: l_c_type(4)    TYPE c VALUE 'TYPE',
             l_c_msg(3)     TYPE c VALUE 'MSG'.
DATA : l_t_fieldcat TYPE TABLE OF slis_fieldcat_alv,
          l_r_fieldcat TYPE slis_fieldcat_alv.
DATA : l_f_line TYPE i.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos    = l_f_line.
l_r_fieldcat-fieldname = l_c_type.
l_r_fieldcat-seltext_m = 'Type'.
APPEND l_r_fieldcat TO l_t_fieldcat.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos = l_f_line.
l_r_fieldcat-fieldname = l_c_msg.
l_r_fieldcat-seltext_m = 'Message'.
l_r_fieldcat-outputlen = 120.
APPEND l_r_fieldcat TO l_t_fieldcat.
To display the message log as a Popup in the form of ALV List
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
      i_title       = 'Message Log'
      i_tabname     = 'G_TY_MSG'
      it_fieldcat   = l_t_fieldcat[]
    TABLES
      t_outtab      = g_t_msg
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_log
Best Regards,
Suresh

Verizon Error Message when Calling out?

Whenever I call out to a select few numbers, I get an error message that says "We could not complete your call at this time. Announcement 3 switch 20-1"
Does anyone know what this means?

Let's ensure you're able to fully utilize your device, iyjhao! Are you in the Verizon Wireless coverage area when your looking to make these calls? What zip code are you located in? Are the numbers you're reaching out to able to make and receive calls?
YosefT_VZW
Follow us on Twitter @VZWSupport

Pulling Hair Out! Need Help: Adobe Prem 6.0 Distorted Audio playback in Timeline

O/S = Windows 2000 Pro
Adobe Premier 6.0
I am in the process of compiling a project in Adobe Premier 6.0, where, up until yesterday, it was playing back perfectly in the Timeline window. Unfortunately now, when I preview the project in the Timeline window, the audio has become distorted, out of sync, and is now 'slower' than the video footage (sounds a bit like a Darlek!), this also happens when I view a clip in the Monitor window. I closed this project down and started a new one, importing a seperate 'audio only' file, but had the same problem. I then opened a previous project that has always played back perfectly but that too had the same audio/video problem. I have checked the frame rate and the speed and both are correct and ok. Incidentely, the audio and video are in perfect sync when I play any clip in the Project Window!
PLEASE PLEASE PLEASE can someone help me. I am pulling my hair out on this one!
Thank you.

John
Thank you so much for all this (and wine snob) Sorry I've not contacted you sooner but my internet connection is down at home......it never rains but it pours eh? I will read and digest your suggestions fully when I'm back up and running.
Thank you loads.
Sarah
>An added note to Sarah (if she ever comes back)
>
>The HTM note in the Zip I uploaded says the 6.02 update is a Beta... but don't
>be worried, Adobe moved on to P6.5 and then the new PPro and just never
>changed the note for 6.02
>P602 IS stable (I still use P602, in a Win2k boot partition) to run my
>Pinnacle Dv500 card for 8mm/Vhs captures... in fact, the only reason I now use
>Premiere Pro is my new computer's motherboard wouldn't work "fully" with Win2k
>(couldn't find device drivers for all the features) and when I switched to
>WinXp I couldn't get P6 to work at all... so now I have a dual boot drive,
>using Win2k only when I want to use the Dv500 and then rebooting to use PPro
>for editing (all data is created onto a 2nd hard drive)
>

"out of memory error" message when not out of memory

I've gotten this message before (as have others) when I'm clearly not out of memory. It's been about a year since this happened last, and I can't remember how I solved it. It seems many others have had this problem and that there has been no simple solution. It occured when I was trying to revise some titles over an imported .mov image which was downloaded from the internet. I revised the titles, but they wouldn't render. Then I got the "out of memory" error message. So far I have:
1) Logged out and logged back in
2) Rebooted
3) Pasted my sequence into a new sequence
4) Saved the project as a new project
None of these things have worked. Of course this all happens when I'm at the very end of the project with a deadline of tomorrow.

I'm having the same problem. I searched "out of memory" and found this solution on another thread..
http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802
However, it didn't help me and I am still looking for an answer. I am running FCP HD 4.5 and Avid Express Pro. I edidted together an 18 min video w music, no effects and exported it as a reference movie. Imported to FCP to add chapter markers and that's when I get the "General Error Out of Memory" Tried the make clip offline thing, but that didn't work. Tried exporting a different video from Avid, 3 min and that worked (with chapter marks).
Anyway, I feel your pain. If you find a solution, please mark this thread "question answered"
Thanks
Quicksilver 867 Mac OS X (10.3.9) 1.12 GB SDRAM, 80 gig + 160 gig

Pulling hair out!

I recorded a basketball tournament championship games direct to disk using FCP6. Got the first half fine. did second half fine. Game was over and I was letting the announcer do his stats. A little kid came up and unplugged my external drive. I was left with a .av file. Can I recover this file? It is a 10gig file. PLEASE someone tell me I can. I know, yes I know I should have used tape as backup but I was doing a three camera shoot using a switcher. I came close to child abuse, but what the heck he was only a kid...

Now you know to save more often instead of having all of your eggs in one basket.
Your file was not properly "closed". If the Get Info window shows appropriate file size you may be able to add the needed info using a "hex" editor.
Not for the faint of heart but fairly straight forward. You need to find any "good" QuickTime file and compare the header (sometimes at the end of the file) data to your non-working version.
What you have now is the just the digital info but no way to open it. A can of tuna without a can opener and you want a tuna sandwich.
A hex editor allows you to open the "raw" file as something that looks like text. When you compare a working file with yours you should quickly see the difference. Copying the missing data from a working file and pasting into the broken one can sometimes fix the file.
You should have pulled the hair out of the little kid instead of your own. But you've also learned a very basic computer issue. Save. Save often. Save to other locations and media. You could have just as easily dropped your laptop and crashed the HD.
Google around for a Mac hex editing app. Many are free.

Program will close automatically when i write a e-mail for few second. And error message will pop out

Once i reply/write a e-mail, the thunderbird program will pop up a error message as below and we can restart or close thunderbird program. Please help how to fix this problem.
AdapterDeviceID: 0x0046
AdapterVendorID: 0x8086
Add-ons: en-GB%40dictionaries.addons.mozilla.org:1.19.1,lookout%40aron.rubin:1.2.13,%7B25A1388B-6B18-46c3-BEBA-A81915D0DE8F%7D:1.7.8.5,%7B2ab1b709-ba03-4361-abf9-c50b964ff75d%7D:1.6.12,%7B8845e3b3-e8fb-40e2-95e9-ec40294818c4%7D:0.9.11.2,%7Ba300a000-5e21-4ee0-a115-9ec8f4eaa92b%7D:0.3.9,%7B1A2D0EC4-75F5-4c91-89C4-3656F6E44B68%7D:0.6.3,%7B847b3a00-7ab1-11d4-8f02-006008948af5%7D:1.6,%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D:2.6.4,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:24.5.0,openmedspel%40e-medtools.com:2.0.1,en-US%40dictionaries.addons.mozilla.org:7.0.1,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.5.1
AvailablePageFile: 3513556992
AvailablePhysicalMemory: 873574400
AvailableVirtualMemory: 3859877888
BuildID: 20140424091057
CrashTime: 1399003549
EMCheckCompatibility: true
Email: [email protected]
InstallTime: 1398964118
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x0046, AdapterSubsysID: 150a10cf, AdapterDriverVersion: 8.15.10.1995
ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6}
ProductName: Thunderbird
ReleaseChannel: release
SecondsSinceLastCrash: 536
StartupTime: 1399003524
SystemMemoryUsePercentage: 72
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 4294836224
URL:
Vendor:
Version: 24.5.0
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 服務提供者 : 2 : 1 :
RSVP TCP 服務提供者 : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 服務提供者 : 2 : 2 :
RSVP UDP 服務提供者 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD RfComm [Bluetooth] : 2 : 1 :
報表中另包含程式錯誤關閉時的狀況資訊。

duplicate question https://support.mozilla.org/en-US/questions/998036?esab=a&s=&r=0&as=s

Cannot update ipod 4 as i always get an error message saying timed out

i cant update my ipod as i keep getting an error message saying timed out

Did you check your security software settings? iTunes has to be able to contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

Obtaining Row Clicked -- Pulling Hair Out

I am working on a nice simple master detail. I have created a datatable and made one of the columns an action link. In the action handler for the link I attempt to get the row data from the dataTable object (to which the view is bound). However, I receive an illegal argument exception when I try to retrieve it. Depending on the various things I have tried I have either gotten an illegal cursor operation from oracle or this illegal argument exception. Also, all of the values for the individual element objects (like linkActionTexr or outputText) are null when they come to my action handler. So, how do I go about getting this information??? What am I missing??

OK I have figured something out that appears to be part of the problem. Now, I just need a fix. The first time a click a link and go to the detail page I get an IllegalArgument Exception. What I am doing is in the acton for the link I store the getRowData (com.sun.jsfcl.data.DataCache.Row) in a session object. Then, on the next page, I pull values out of the map on that row and stuff them into fields. Is there some method or property that I need to set on the RowSetDataModel??
Thanx,
LES

Error message - pulling hair out

Similar Messages

Maybe you are looking for