Error message: Quicktime version 7.1.3 is installed, iTunes requires v. 7.5

So yeah, I plugged in my iPhone into my new computer that I just built for the first time, and I got this error. iTunes was working fine 2 hours before this. I have Quicktime v. 7.5.5 installed, and just downloaded iTunes yesterday. I tried reinstalling, same message. What gives?

Try removing QUicktime using the method for Quicktime in this article:
http://support.apple.com/kb/HT1923
Then download and install the version of Quicktime that does not include iTunes (the second option):
http://www.apple.com/quicktime/download/win.html

Similar Messages

Error message "unable to acesses IXP213.tmp" when installing itunes

I have windows XP and whenever i try to upgrade, install or uninstall itunes i get teh error message,
"Unable to accesses file
C:\DOCUME~1\user\LOCALS~1\Temp\IXP213.TMP\
please confirm that registry exists or select an alternate route."
I've tried all the methods that i could find on the boards and in the trouble shooting page but none of them have worked. Got any ideas on how to correct the problem?

Doublechecking something. When you attempt to clear the TEMP directory, as per the instructions in the following document:
Trouble installing iTunes or QuickTime software in Windows
... does Windows allow you to do the deletion? or does it refuse to delete that file?

Error messages 2502 and 2503 when trying to install itunes to my computer

I have attempted to download itunes to my windows 8 operating system computer and it keeps telling me that it has encountered and unexpected error installing this package. This may indicate a problem with this package. The error messages are 2502 and 2503. Any help?

I did find one post saying to download to "downloads" folder, wherever,,,, then right click, and Run as Administrator and don't just click run from the online prompt. Mine installed without a hitch. All the programs, I-Tunes, Quicktime, and Steam installer for games.
who'da thunk it? It finally works, I can load my I-pod Nano, "gen 5", and view quicktime vids.

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

Error message: QuickTime couldn't parse it: -43

Hello,
I recently borrowed a friends video camera to record a few 3-minute clips. In order to import the clips from the camera into my computer, I had to use software called "ImageMixer 3 for Panasonic". It would not allow me to import directly into iMovie as I have been able to do with other video cameras.
In any case, the clips are now on my computer and I would like to import the clips into iMovie so that I can edit them and paste them together into one movie. When I try to import, I get the error message "QuickTime couldn't parse it".
Can anyone help me? I used to have software on a previous computer that allowed me to parse video clips out in smaller files. However, I no longer have that computer.
I am using a Mac Pro Dual 2.66 running on OS10.4.11. I have iMovie HD 6.0 .
My video clips are now in my "Movies" folder and are approximately 225MB in size and are MPEG files.
Thank you for your help!! :-}

I searched in Google for "QuickTime couldn’t parse it: -2048" and found this thread.
I was trying to improt a YouTube video into iMovie that I had downloaded via the activity monitor in Safari. I was puzzled as to why I couldn't import a YouTube file today when it had worked yesterday.
I then realised that I had not amended the file extension on the download to .flv - hope that this helps someone.

QuickTime Error Message: "QuickTime Player quit unexpectedly"

Error Message: "QuickTime Player quit unexpectedly"
From the error report (sent to Apple):
          QuickTime 10.2 (603.6)
          Operation: Launch
          Application Specific Information: [565] stack overflow
Hardware and software configurations:
          MacBook Pro 15" Retina Display
           Mac OS X 10.8.2
Affects ALL .mp4 files (double-click and attempting to open file from within QuickTime)
Occurs when attempting to launch QuickTime by double-clicking an .mp4 file, or attempting to open an .mp4 file from the QuickTime menu. Attempting to open ANY .mp4 file results with this error message.
QuickTime is the default application for all .mp4 files. Reseting this option via the Finder "Get Info" had no effect. Changing the option to another video player (e.g., MPEG Streamclip) allowed the .mp4 files to play. Returning to QuickTime as the default player resulted in same error message (i.e., "QuickTime Player quit unexpectedly").
The video files (.mp4) are not the problem; ALL of the files open within iTunes, MPEG Streamclip, and other video players. The problem appears to be limited to QuickTime or something that is interfering with QuickTime.
Note that no external drives or other peripherals are connected to the computer when this error occurs, except for a Wi-Fi connection via an Apple Time Capsule (disconnecting the Wi-Fi did not resolve the problem; same error message occurred when attempting to open an .mp4 file).
No 3rd party QuickTime plug-ins have been installed.
QuickTime was working fine and playing ALL videos until the last week. No discernible usage pattern is evident for diagnosing the reason for the error message.
Note the exact same problem is occurring on two separate MacBook Pro 15" Retina Display systems, both running Mac OS X 10.8.2
Mac OS X 10.8.2 software is up-to-date.
Rebooting the system did not rectify the problem.
Two separate computers, both exhibiting the same problem with different .mpg4 files.
Any ideas?
The consideration of a reply is appreciated.

Paull71
To Apple Discussions!
You are not disturbing me. In order for anyone here to help you, you must provide details of what the problems you are having with QuickTime in order for the users here to provide proper troubleshooting suggestions.
Also, please indicate all the the troubleshooting things you have tried to solve your issue. This will eliminate the +"been there done that"+ scenarios.
If your problem is not like the one of this posting, then you will need to re-post as a New Topic so that your issue *can get more focused attention.*

I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station". All my software is up to date and

I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

HT2311 Just downloaded newest itunes version. Now, it refuses to open, with error message, "This version of iTunes has not been correctly localized for this language. Please run the English version." Any thoughts?

Just downloaded newest itunes version. Now, it refuses to open, with error message, "This version of iTunes has not been correctly localized for this language. Please run the English version." Any thoughts?

I had the same problem, I reinstalled and lost all my music now I cant even retrive it from emusic where i purchased music....

When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

1) The older version of Bonjour can not be removed. Contact your technical support group.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Error message: previous version saved in adobe premiere pro

Greetings all,
PrEl 7 shut down unexpectedly when I tried to save a portion of my timeline as an avi. When I re-opened it, I got the error message previous version of this project saved in adobe premiere pro and it would not allow me to open it.
What can I do to restore the project; I'm in the finishing stages.
Thanks,
Antoinette

There have been a couple of similar threads, and some are fairly recent. I do not recall if there was ever a resolution. It also seems that people have looked at the XML code in the PREL files, and their header info clearly stated PrElements, and not PrPro, yet something is not being read correctly by PrE.
Now, do you have any AutoSave versions of the PREL? Note: the default is five AutoSaves, and these are overwritten, once one has gotten the five. Check the Time/Date of each, as 003 might be later than 005.
If I can find some of those threads, I will post links to them, and also refresh my memory on any solutions.
Good luck,
Hunt

When I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?

Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
Post back if you still have problems
regards

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Error Message: Quicktime failed to initalize error (-2096)

I can't open ITUNES. I have reinstalled quicktime andn ITUNES twice.....no help. Error Message: Quicktime failed to initalize error (-2096) Any suggestions?
If I were to uninstall ITUNES, then download it new, would the music on my IPOD 30G, sync back to the new ITUNES???

try this,,,,, this JUST worked for me, i had the same problem, error 2096. Go into your PROGRAM FILES folder, open the ITUNES folder. Right click on the ITUNES.exe icon, click COMPATIBILITY, then -uncheck- the box that says "run this program in compatibility mode for.....". After that you should be good to go!

Error message: Quicktime version 7.1.3 is installed, iTunes requires v. 7.5

Similar Messages

Maybe you are looking for