Error message re: domain & on either end of email addresses HELP !

when I take names & email addresses from my Address Book & klik on enter to list as recipient ... some - most - all show up on the "send" listing like this = wayne flaaten < [email protected]>
then when I get ready to send the email... and hit "SEND" ... a box shows up ... that says something like ...ERROR ...
wayne flaaten < [email protected] > does not have a domain... and can't be sent without a domain ...
a few times ... I have been able to go back ... scroll down the list of recipients ... find the < > marks = whatever they are called... and DELETE them... then hit SEND again... and the email will go thru = SENT ....
NOW... the last 2-3 emails I have tried to send to friends / relatives... ALL = EVERY recipients email address has < > before & after it ?!?!? ... I went thru... ONE-BY-ONE... deleted ALL the < > marks and STILL got the same error message ! = FRUSTRATING !
note: THIS weird phenom iz TOTALLY new !! = it has happened more & more the past 2 days ...
What can U do to help fix / end this from happening ?
What might I need to do to fix it / end this ? -- with my VERY LIMITED knowledge of computers ...
NOTE: I am NOT a techeee ! = I am about 1 level above Luddite !
HELLLLLLLLLLP !!!
PLEEEEZ !!!!
Tx-a-million ! .... make that TX-A-BILLION !!!
Wayne Flaaten
Greenbank, WA
360-222-3143
[email protected]

''WAYNER1 [[#answer-667712|said]]''
<blockquote>
ed-meister,
I DID contact my service provider ... BEFORE I contacted u / Firefox...
and I explained this problem to them = just like I did to U / Firefox...
They (their tech dept.) told me that this problem was NOT in their realm... but that it was a Firefox problem... and that I needed to contact Firefox to find out what was causing it & what to do to fix it.
Thus... I contacted Firefox & sent the above message = plea for HELLLP !
Annnd... whatz the difference betwixt Mozilla Thunderbird & Mozilla Firefox ?? = pleeez keep in mind that ... I am almost totaleee ignorant of thingz "techee" ...
Sooo... what do I need to do now ???
Tx-a-million !
Wayne
</blockquote>

Similar Messages

When I use a simple form, I get this error message "Form communication is configured with an email address of..." and the person's email address did not get sent a message

I was unable to use the simple form to which I should simply put the email address of the person to whom the form should be sent to. I get this error message:
As a result of this, this person did not get any filled form response. Where did I go wrong and how can fix this.
Second question, I am using GoDaddy.com account and they have their own set of php form. If I want to use their php form, where in Adobe muse, can I insert their php?

Hello Tonchee
If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IMessage shows error message when I try to add additional email addresses

I have an iPod touch and everything is working OK, email, safari, wifi etc. However when using iMessage i do not want to use the same email that i use for my iTunes account. So I have tried to add one of my additional gmail accounts. However when attempting to verifying the address, I get a message, An error occurred while verifying your emaile. Any one has a clue towhat is happening??
PS.I am located in indonesia at this time and my Aoole account is our of Australia.
Pak Frank

Hi,
We typically see this when an organizations IT department is blocking the upload of images. Are you working on this at work? If so, can you try adding the image outside your companies network?
Thanks,
Todd

Yahoo email account on iphone 4s error message MFMessageError Domain error 1032 keeps coming up trying to log into my email. Why does this happen?

I'm trying to log in to my yahoo email account on iphone 4s and the error message MFMessage Domain error 1032 keeps on coming up. Why is this happening and how can I fix it?

What worked for me was resetting my password on my email then rebooted my iPhone 4S.

Error message MH 175 "The listing end is not allowed to be in the past"

Hi,
While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
thank you
regards
prahlad

Hi,
Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
Regards
GK

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head".

Trying to publish an event to fb from iPhoto '09, 8.1.2. Getting error message: "Line 22: Opening and ending tag mismatch: meta line 0 and head". Never had any trouble before. What in the world?

See if you can export those same photos to a folder on your Desktop.
OT

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files.

My iTunes won't recognize my iPod 3GS!!! HELP! I had recently updated my iTunes and now upon plugging in my iPod iTunes comes up with a error message. Leaving me unable to sync anything! :( HELP!

My iTunes won't recognize my iPod 3GS!!! HELP! I had recently updated my iTunes and now upon plugging in my iPod iTunes comes up with a error message. Leaving me unable to sync anything! HELP!

What is the exact error message you are receiving?
B-rock

Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

I don't think Lion installed it, rather you did. That said System Preferences>Print & Scan. select your Epson printer and then select Options & Supplies>Driver>Print Using>Select print Software. Then scroll down to the driver you want to use.

ERROR message! importing Motion files back into FCP. please help.

ok...so i started my project, everything worked seamless from fcp to motion and back...and then bam! error: 1 file recognized, 0 access denied, 1 unknown. ive done everything that i know, ive reinstalled, fcp studio and operating system...ive been over every setting...ive deleted preference files, repaired permissions... now my old motion files that were created before the error message still import just fine...can anyone help? i hate to outsource something i can do myself...
thank you.
gdh

Have you tried changing the extension on the motion file? You can label it .mov and see if FCP recognizes it then.
Andy

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

HT1338 I have plugged in a external drive and i get the following error message 'mount - t-ntfs-3g-o force/dev/rdisk3s1' help what does this mean?

I have plugged in a external drive and i get the following error message 'mount - t-ntfs-3g-o force/dev/rdisk3s1' help what does this mean?

You may be infected with malware.
See: [[/questions/860893]]

How can I copy and forward a string of text messages from a Iphone 5s to an email address

How can I copy and forward a string of text messages from an IPhone 5S to an Email address?

You can find my blog post on the same.
http://www.pointtobenoted.com/blog/technology/mobile/how-to-copy-messages-from-i message/
The 6 steps process is listed step by step.
Hope this helps.
http://www.pointtobenoted.com/

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

Error message re: domain & on either end of email addresses HELP !

Similar Messages

Maybe you are looking for