Error Message: Real estate object cannot be determined from entries
Hi
We are using the BBPIV01 IDoc Type to pass Invoice data to backend system. We have implemented BBP_ACC_CHECK_ICC BADI to update the RL_EST_KEY (Internal Key for Real Estate Object) field. But when the IDoc is processed in the backend system it end up with the following error message.
<b>Real estate object cannot be determined from entries (ID: RECAAP, No: 012 ).</b>
Note: We are treating Real Estate Contract as an Account Assignment Category in SRM.
Any help would be highly appreciated.
Regards
Kathirvel
Hi Ramki
I have check the same i.e. in ECC. All the necessary changes explained in the notes have already been done in the release we are using. And I meant that the notes are not relevant for the problem I am facing now.
Thanks a lot for your concern.
Regards
Kathirvel
Similar Messages
-
Real estate object cannot be determined from entries
Hi All,
When i am posting GLs (T.codes FB50L & FB50), i got error like Real estate object cannot be determined from entries,
For this i am using the one expence account and one bank account,
As we know for the bank acccounts Value date is mandatory, If i give the value date the system is showing the above error,
If i dont give the value date system is allowing to post,
Give me the solution and what is the cause of the error,
Thanks ,
Kalyan.Hi
You are posting outgoing payment for GL through FB50/L.
Use F-07 - Outgoing payment other then customer/vendor.
Regards
Sampath -
Error message 63511 - Real Estate Object
Hy,
I am in a SAP Business All in One...CO module
I want to do a manual transfer - KB11N - between two cost centers and receive the following error
"Real Estate object cannot be found
Message no. 63511
Diagnosis
The system cannot determine any real estate objects with your entries. The following details are required for determining a real estate object:
Procedure
Specify the object according to the rules stated."
I don't understand what is about ...
Thanks a lot, a good dayHi Ramki
I have check the same i.e. in ECC. All the necessary changes explained in the notes have already been done in the release we are using. And I meant that the notes are not relevant for the problem I am facing now.
Thanks a lot for your concern.
Regards
Kathirvel -
My iPod classic won't synch from iTunes. This is a recent problem. The error message reads "The iPod cannot be synched. An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync. I am running current versions of software on the iPod and the iMac / iTunes. HELP! J
First try to resolve #2 by:
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says. -
I purchased a box set of books on iTunes, and downloaded them. The title shows up in the "purchased" section, but when I try to send it to my iPod nano, I get an error message telling me it cannot be moved because it cannot be found. I can't find a screen anywhere offering the option to re-download either. I've paid for the books, but cannot access them! Every time I upgrade iTunes, it gets more confusing and harder to use.
Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
Can't install itunes - error message "the folder "itunes" cannot be found
Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?
It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT -
I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
Hi all..hoping someone can help me out with this.
So I recently lost my iPhone 5, therefore I am going to use a friend's old iPhone 4 in the meantime. The iPhone 4 has been jailbroken, but I wanted to do a reset to clear the jailbreak as well as just clear all other data, so that I can just restore my own iCloud backup & use with my own data.
However, the problem I am now faced with is that the phone is in recovery mode, and when I plug in the phone to my computer...I am given the options to click Restore. But after all the time it takes to update the software and supposedly doing its thing with "restoring" the phone....turns out no luck, i get an error message saying the phone cannot be restored. And now I pretty much can't do anything because I do not know how to do a reset of any sort to get out of this recovery mode.
PLEASE HELP. first time losing phone, first time trying to figure out how to reset and get out of recovery mode. I just want to be able to reset and then restore with previous backup..
I really appreciate the help. Thanks in advance.
*please ask any questions that you may need in order to help me solve this, since I am not exactly sure how to word some of these problems*If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
More info on unable to Update or Restore > http://support.apple.com/kb/HT1808
Note:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers... -
I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible? What do I do?
iOS 5 is only compatible with the iPhone 3Gs and later...
Updating to iOS 5 http://support.apple.com/kb/HT4972 -
error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
I am using Adobe Creative Cloud, I go into Apps and I get the error message undefined. I cannot download anything. I try to refresh application, nothing. I can even see what I downloaded previously. I am using windows 7, 64 bit.
This worked fine for me for until this morning.I am on an hp experiencing a similar issue e.g., Creative cloud download error 'undefined'. On an hp. screengrab attached.
Maybe you are looking for
-
Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider
-
I've just barely started working with Acrobat and I was looking for some pointers on where to get started. How should I go about familiarizing myself with the program? Is there anything I should absolutely know about Acrobat? What are some of your fa
-
How to add fury trim around an image
What i want to do is add Fur around the outer edges of an image. Frame the image with fur and have the corners with a natural transition. I am working on a Poster for a Pimp/Ho Party and i want to trim the image with "PIMP" fur. Does anyone know of a
-
Mainstage 2 - MUCH worse CPU usage!
On my MBP, the same settings same project was hovering around 75% cpu with Mainstage 1, now Mainstage 2 is MAXED. Had to lower sample rate AND increase buffer to make it useable. This is unacceptable! Have noticed a few bugs fixed, and some great fea
-
Ready for Input Variables for Multiple Queries in I_T_VAR_RANGE
Hi I created Web template which contains multiple views/queries. Two views/queries contain Ready for Input Variables. I have custeomer exit code for this Web template. I wrote code by using Ready for input variable which pass to customer exit code. B