Error message - Recording engine: media is busy

I have no idea what this means.
When I burn a QT movie made prior to my upgrading to Tiger, its works fine.
When I try to burn one made after the upgrade, I get that message.
Is that the reason?
Will this not work with Tiger?
Thansk.
J.

I've not seen that error message. With the upgrade, did you also upgrade Quicktime? (note that QT 7 requires a new QT Pro license) QT is the backbone of iDVD, iMovie, etc.
John

Similar Messages

  • I'm getting this error:Recording engine: Media is busy, usually by an unmou

    Help. I've never gotten this before. I tried to burn too big of a project, but now I get this message for even the smallest project.

    I have tried other iMovie projects. Now I'm receiving "Burning is finished. There were errors. Recording engine: media is busy; probably an unmountable volume" on every iMovie file and Quicktime file that I try.

  • Error message when processing in the Business Warehouse

    hi everybody!!
    this was the error i got.plz let me know the correction process.plz explain stepwise.
    thank u,
    jack.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update

    Hi,
    This issue is in BI when you are trying to load data from one object to other Object
    example: ods to cube
    We need the Log information which you can find that in the monitor screen Status tab "Push button"
    Regards
    Hari

  • Equium A100-147 with error message "PXE-E61 Media Test Failure"

    Hi all,
    I have Equium A100 out of warranty, due to error message "PXE-61 Media Test Failure" I took it to my local computer menders, they told me my Toshiba 60gb hard drive had failed (MG6034GSX) and replaced it with a another 120gb model.
    I tried to reload system from Toshiba recovery disc, reload reaches 75% then messages come up saying it can't find loads of operating system files.
    Thinking the Recovery disc was faulty I obtained a replacement from Toshiba, and this reload disc gave the same problem.
    I have loaded XP Professional on to 120gb HDD and it runs OK but I would like to load original as it came with XP MCE.
    Is my problem the 120gb HDD which should be as original 60gb and has the HDD got to be genuine Toshiba to accept the recovery media ?
    Does anybody have any ideas, I would really appreciate your help.
    Cheers
    diggermender

    Hi R2D2
    Thank you for your help. I tried the default bios settings and reformatting the HDD and an OS reinstall with the same outcome.
    As you said it could be a HDD problem I returned it to the people who fitted the replacement HDD, they diagnosed a faulty HDD, replaced it under warranty and installed the OS for me. I guess the answer to "does the replacement HDD have to be genuine Toshiba" is no, in my case it doesn't.
    Machine is now working fine. Thank you for your help, it's really appreciated and once again I think this is a great forum.
    Cheers
    Diggermender

  • How do you burn videos taken with myIphone and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I alos tried using Real Players file converter with no success!

    How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I also tried using Real Players file converter with no success!  Thanks in advance for any help you can give!

    Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion.  While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post.  A suggestion in that direction would help.
    Anyway, Apple is backing off from supporting optical media.  It also depends upon what you mean by "DVD".  A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV.  Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago.  I don't know if the old versions work under newer systems.  There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
    If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

  • Error message with Avid Media Composer 6

    I have installed a free trial of Avid Media Composer 6.  I had it on my computer and it was working fine, but I thought there was an issue so I unistalled it, and then reinstalled it.  Now I am getting an error message whenever I attempt to open a project.  It reads..."Segmentation fault" in thread "MainThread", at address      0x0 ... and then the Avid Media Composer shuts down.  I have read that it is necessary to unistall any existing software first which is exactly what I did.  Im using lion on a 2 ghz i7 macbook pro.

    You should contact Avid support.

  • Error Message on Windows Media Player 'ONE OR MORE ARGUEMENTS NOT ALLOWED'

    THIS FEELS LIKE THE COMMERICAL ...
    I'm trying to use Windows Media Player on my Mac Intel -- brand new.
    I keep getting this error message -- no kidding!
    "One or more arguements, not allowed"
    Intel Mac Mini 1.66Mhz   Mac OS X (10.4.9)   2gb RAM Installed

    WMP for Mac has been discontinued and is not written for Intel Macs.
    Instead you should use the free Flip4Mac QuickTime WM plugin available free from Flip4Mac.com
    If you choose to stick with WMP, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups-beta.google.com/group/microsoft.public.mac.office> rather than an Apple forum.
    Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

  • Error Message upon adding media Adobe Premiere Elements 12

    . The program opens and I'm able to add media to a new project.  Once I move the clip to the timeline I get the error message "Adobe Premiere 12 Has Stopped Working".  I check the update on the video driver and it is current.  This problem happen after I have been using the program successfully to two hours.

    mattrayl
    What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update?
    If not, please do so.
    You wrote
    Once I move the clip to the timeline I get the error message
    What are the properties of the clip that you mention? If you added the clip to the project first, does the problem occur?
    The above are the initial questions that come to mind.
    Looking at this further....
    Since you wrote
    This problem happen after I have been using the program successfully to two hours.
    Let us start with how much content (including source media, effects, titles, and transitions) you have on the Timeline at this 2 hour mark when the program stops working? Is there a consistent pattern of what you are doing in the program when this happens? Are you multitasking and running Premiere Elements?
    Can you reopen this project? And, if so, how long can you work with it before the program shuts down again?
    What is your project preset and the properties of your source media for the project?
    Does the problem exist with all your projects or just this one?
    We will be watching for answers to these preliminary questions and then we will plan our troubleshooting strategy according to your details.
    Thanks.
    ATR

  • When Syncing with Desktop I get a error message "Record with Specified fffffeoa not found

    I can sync with my desktop using my Playbook but will not sync with my 9700 bold and receive this error message.

    You're most likely gonna have to backup, then erase your phone, as described here:
    http://support.apple.com/kb/ht5014
    If Orange has informed you your request has been processed, this should do the trick.

  • Error Message while rendering media

    I receive the following error message:
    Internal software error:.\Vobulator\BlockPlanner\BlockPlanner.cpp, line 215
    Please advise
    Rob

    Rob
    Ordinary I would ask "What version of Premiere Elements and on what computer operating system it is running?"
    But in this case, "Vobulator" is glaring out at me.
    For Premiere Elements (essentially any version)....
    You have put a stop marker at the end of the last item of your Timeline destined for burn to.
    Remove that stop marker. It is not needed and causes this type of problem.
    Please let us know if I targeted the core of your issue.
    Thank you.
    ATR

  • Error Message "javax.microedition.media.Player" not found

    I downloaded a game but when I try to play it I get this message:
    Error starting BrainChallengeVol2_BlackBerry_8700_EN_IGP_101: Class 'javax.microedition.media.Player' not found.
    Does anyone know where I can find this software or if it is available for the 8700?
    Thanks,
    Carolyn

    WMP for Mac has been discontinued and is not written for Intel Macs.
    Instead you should use the free Flip4Mac QuickTime WM plugin available free from Flip4Mac.com
    If you choose to stick with WMP, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups-beta.google.com/group/microsoft.public.mac.office> rather than an Apple forum.
    Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

  • Error message in bank accounts of Business Partners

    Hi!
    When we want to put a bank account for the business partner, we obtain this message: "This Entry already exists in the following tables 'BP _Bank account'".
    For information my customer use SAP 2005 and the patch level 46..
    Thank you
    Best Regards
    Séverine

    Hi,
    The issue mentioned by you is a DB specific issue which needs to be investigated by the Support Centre.
    Please log a SAP Support ticket for the same.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Error Message: PXE-E61 media test failure, check cable

    Hi,
    Recently when I have loaded up my laptop one of two things has happened:
    1) I am taken to Windows error recovery and told that I can either launch windows boot repair or start windows normally. Both lead to a screen which says 'Status: 0xc00000e9, Info: An unexpected I/O error has occurred. It also says that 'windows has experienced a problem communicating with a device connected to your computer. This error could be caused by unplugging a removable storage device, or by faulty hardware such as a HDD or CD-ROM drive'.
    2) I am greeted by a black screen with a lot of text, but one line in particular says : 'PXE-E61 Media test failure, check cable'
    Having read some forums online I have checked the BIOS and the Hard Drive is being detected sometimes, but other times is 'not present'. On examining the boot order the HDD is registered as the first thing to boot.
    I was hoping that some of you would be able to help me out a bit more here, because I'm a bit of a novice when it comes to repairing computers! Any advice that you can give would be appreciated.
    My computer is a Toshiba Sattelite-C660D-102
    Thanks !

    Your hard drive is more than likely failing and will need replaced. You can also check to make sure your hard drive is properly seated and has a good connection.

  • Premiere Pro CS6: capture error message "Recorder Captured No Frames"

    How can I talk to a person at Adobe to get help with CS6?  You spend over a thousand dollars and you can't even get a phone number to call?
    Message was edited by: Kevin Monahan Reason: needs a better title. I told the user how to contact support.

    StuartMcRae wrote:
    Kevin, If only I had a firewire output on my camera. I'm using a Sony HVR-Z1U camera.
    It only has these connections -
    S-Video
    A/V
    Component output
    XLR IN (x2)
    i.Link
    LANC
    Headphone stereo mini
    Hi Stuart,
    i.Link is FireWire. Sony calls it something different.
    StuartMcRae wrote:
    So I run the tapes into my Sony HVR-M25U tape deck which does have an HDMI output.
    I've ran that into a Matrox MX02LE (with MAX) for capture and I've done this for years with Premeire Pro although it was with earlier versions (4 and 5).  I'm using a Win 7-64 CPU with 16GB and an SSD for my OS.
    The HVR-M25U also has a FireWire I/O. Please try to connect that (or the one from your camera) directly to your computer for best results.
    Thanks,
    Kevin

  • Error message when recording video

    Have QT 7 Pro and it sees my camera, I set up hit record and I see the audio bar moving but the screen is black. When I stop the recording I get this error message:
    *RECORDING FAILED BECAUSE NO DATA WAS RECEIVED*
    *Make sure that the media input source is turned on and playing.*
    Well the device is plugged in and turned on and the Mac sees it on the QT program because when I choose 'Movie Inspector' my camera is chosen as the source. Also the A/V settings are greyed out as to not be able to adjust.

    Check that your video drivers are up to date.

Maybe you are looking for